[ANN] [CHC] Chaincoin - Network Upgrade 16.3 - SegWit Activated

[cryptoninjapanda]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

[Buchi-88]

Hello,

i will setup a masternode on my Raspberry Pi, but i have problems by the compile....

Anyone have a HowTo?

regards

I have errors by the compile, anyone have a actually HowTo?

regards

[adnanefs]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

3.6 coins daily? regards.

[BitcoinArsenal]

Are there any statistics about how much you get every day with a master node? Or better, what is the return on investment?  I currently have a Bitsend masternode and would like to set up a Chaincoin masternode as well.

[cryptoninjapanda]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

3.6 coins daily? regards.

Are there any statistics about how much you get every day with a master node? Or better, what is the return on investment?  I currently have a Bitsend masternode and would like to set up a Chaincoin masternode as well.

Currently ~1.1CHC/day

[Koal-84]

Hello,

at time i compile the wallet on the Pi, i use this HowTo:

https://steemit.com/cryptocurrency/@crypto-wizard/launching-a-chaincoin-masternode-made-easy

but at the End i have this error:

make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird betreten
  CXX      libchaincoinqt_a-walletview.o
In file included from walletview.cpp:21:0:
loggerpage.h:18:26: fatal error: QStandardPaths: Datei oder Verzeichnis nicht gefunden
 #include <QStandardPaths>
                          ^
compilation terminated.
Makefile:1887: die Regel für Ziel „libchaincoinqt_a-walletview.o“ scheiterte
make[5]: *** [libchaincoinqt_a-walletview.o] Fehler 1
make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:2729: die Regel für Ziel „all-recursive“ scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1017: die Regel für Ziel „all“ scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1028: die Regel für Ziel „all-recursive“ scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:733: die Regel für Ziel „all“ scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:513: die Regel für Ziel „all-recursive“ scheiterte
make: *** [all-recursive] Fehler 1

anyone have a solution?

[criticoflife]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

3.6 coins daily? regards.

Are there any statistics about how much you get every day with a master node? Or better, what is the return on investment?  I currently have a Bitsend masternode and would like to set up a Chaincoin masternode as well.

Currently ~1.1CHC/day

so 25c a day. i was tempted until i saw you post that. lol

[cryptoninjapanda]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

3.6 coins daily? regards.

Are there any statistics about how much you get every day with a master node? Or better, what is the return on investment?  I currently have a Bitsend masternode and would like to set up a Chaincoin masternode as well.

Currently ~1.1CHC/day

so 25c a day. i was tempted until i saw you post that. lol

$0.25/day is a great return on a $180 investment that is like 50%/year ROI

[suprnurd]

Hello,

i will setup a masternode on my Raspberry Pi, but i have problems by the compile....

Anyone have a HowTo?

regards

I have errors by the compile, anyone have a actually HowTo?

regards

You are probably missing a dependency or multiple dependencies. You will need to install them and make them available to the compiler before it will work.

Hello,

at time i compile the wallet on the Pi, i use this HowTo:

https://steemit.com/cryptocurrency/@crypto-wizard/launching-a-chaincoin-masternode-made-easy

but at the End i have this error:

make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird betreten
  CXX      libchaincoinqt_a-walletview.o
In file included from walletview.cpp:21:0:
loggerpage.h:18:26: fatal error: QStandardPaths: Datei oder Verzeichnis nicht gefunden
 #include <QStandardPaths>
                          ^
compilation terminated.
Makefile:1887: die Regel für Ziel „libchaincoinqt_a-walletview.o“ scheiterte
make[5]: *** [libchaincoinqt_a-walletview.o] Fehler 1
make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:2729: die Regel für Ziel „all-recursive“ scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1017: die Regel für Ziel „all“ scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1028: die Regel für Ziel „all-recursive“ scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:733: die Regel für Ziel „all“ scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:513: die Regel für Ziel „all-recursive“ scheiterte
make: *** [all-recursive] Fehler 1

anyone have a solution?

If you're trying to build the GUI wallet, then you need to have QT5 installed. If you have both QT4 and QT5 installed, you will have to use the flag --with-gui=qt5 with configure. If you are just trying to build the command line version you can try ./configure --without-gui --disable-tests

The full build doc is here: https://github.com/chaincoin/chaincoin/blob/master/doc/build-unix.md


Voting results page is up: https://www.chaincoin.org/voting/

Big thanks go out to everyone who has voted so far! If you haven't voted yet and care about the future of Chaincoin, please go and vote!

[slaman29]

2689 masternodes are running woho  just got my first CHC 2.80007000 from one of my masternodes

And it goes to 3.6 in just 25 days

3.6 coins daily? regards.

Are there any statistics about how much you get every day with a master node? Or better, what is the return on investment?  I currently have a Bitsend masternode and would like to set up a Chaincoin masternode as well.

Currently ~1.1CHC/day

so 25c a day. i was tempted until i saw you post that. lol

Yeah, if anyone would like to share daily averages over the past week or since getting Masternodes, please do so. It might entice those of us on the sidelines. If anyone knows my old post history, then you might know that I got very interested in an alt here that implemented Masternodes last July (actually it started doing it from months ago but the dev only managed in July). At the very beginning it was profitable, but now I don't really earn much more than before implementing it.

Not saying it's bad. Just haven't seen much higher profits.

[cryptoninjapanda]

Voting results page is up: https://www.chaincoin.org/voting/

Big thanks go out to everyone who has voted so far! If you haven't voted yet and care about the future of Chaincoin, please go and vote!

Wow the voting page looks great!

[mirbella]

The average payment per day is 0.8 CHC! Which means around 0.15 USD per day!!! You can ask in CHC Slack if you don't believe me!
And the network hashrate is even lower now - Suprnova Pool Hash: 4,638.08 MH/s Pool Workers: 75

[Neo--]

The average payment per day is 0.8 CHC! Which means around 0.15 USD per day!!! You can ask in CHC Slack if you don't believe me!
And the network hashrate is even lower now - Suprnova Pool Hash: 4,638.08 MH/s Pool Workers: 75

vps costs more than 3$ Monthly  what if you get 1chc per day. its nothing.

[suprnurd]

Here is the message I put up in the slack a while back:

Master Node Average Monthly Rewards
I have been quite fortunate to have two (2) master nodes running for the entire month of August. One of the nodes earned 14CHC and the other one earned 20CHC so my monthly average CHC/node is 17 and my daily average CHC/node is 0.54838710.

I have also been able to track another users’ nodes over the past 19 days and his results are slightly different to mine. Out of his 3 nodes, the first one received 10CHC, the second one received 22CHC, and the third one received only 4, making his daily average CHC/node 0.48387097.

I think it’s important for those of you who are concerned with the cost of running a master node (i.e. paying for a VPS) that you take these averages in to consideration when deciding whether or not to run a master node.

It's almost the end of the month, once we're in October I will report back on my September earnings.

[Koal-84]

Hello,

i will setup a masternode on my Raspberry Pi, but i have problems by the compile....

Anyone have a HowTo?

regards

I have errors by the compile, anyone have a actually HowTo?

regards

You are probably missing a dependency or multiple dependencies. You will need to install them and make them available to the compiler before it will work.

Hello,

at time i compile the wallet on the Pi, i use this HowTo:

https://steemit.com/cryptocurrency/@crypto-wizard/launching-a-chaincoin-masternode-made-easy

but at the End i have this error:

make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird betreten
  CXX      libchaincoinqt_a-walletview.o
In file included from walletview.cpp:21:0:
loggerpage.h:18:26: fatal error: QStandardPaths: Datei oder Verzeichnis nicht gefunden
 #include <QStandardPaths>
                          ^
compilation terminated.
Makefile:1887: die Regel für Ziel „libchaincoinqt_a-walletview.o“ scheiterte
make[5]: *** [libchaincoinqt_a-walletview.o] Fehler 1
make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:2729: die Regel für Ziel „all-recursive“ scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1017: die Regel für Ziel „all“ scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1028: die Regel für Ziel „all-recursive“ scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:733: die Regel für Ziel „all“ scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:513: die Regel für Ziel „all-recursive“ scheiterte
make: *** [all-recursive] Fehler 1

anyone have a solution?

If you're trying to build the GUI wallet, then you need to have QT5 installed. If you have both QT4 and QT5 installed, you will have to use the flag --with-gui=qt5 with configure. If you are just trying to build the command line version you can try ./configure --without-gui --disable-tests

The full build doc is here: https://github.com/chaincoin/chaincoin/blob/master/doc/build-unix.md


Voting results page is up: https://www.chaincoin.org/voting/

Big thanks go out to everyone who has voted so far! If you haven't voted yet and care about the future of Chaincoin, please go and vote!

Hello i have compile with this configure, but the same error...

./autogen.sh
./configure --with-gui=qt5
sudo make

Error:

AR       libchaincoinqt.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
/usr/bin/ar: libchaincoinqt.a: Auf dem Gerät ist kein Speicherplatz mehr verfügbar
Makefile:1056: die Regel für Ziel „libchaincoinqt.a“ scheiterte
make[5]: *** [libchaincoinqt.a] Fehler 1
make[5]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:2729: die Regel für Ziel „all-recursive“ scheiterte
make[4]: *** [all-recursive] Fehler 1
make[4]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1017: die Regel für Ziel „all“ scheiterte
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis „/home/pi/chaincoin/src/qt“ wird verlassen
Makefile:1028: die Regel für Ziel „all-recursive“ scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:733: die Regel für Ziel „all“ scheiterte
make[1]: *** [all] Fehler 2
make[1]: Verzeichnis „/home/pi/chaincoin/src“ wird verlassen
Makefile:513: die Regel für Ziel „all-recursive“ scheiterte
make: *** [all-recursive] Fehler 1
pi@raspberrypi:~/chaincoin $

regards

[Koal-84]

Hello and good day,

i have a problem with the configuration from the masternode (Windows on my Pi the compile doesn't work):

I have forwarding the port 11994 and i can control it with the portscanner: http://www.dnstools.ch/port-scanner.html

Port-Status auf Host 194.96.xx.x.11994   The Port is open

I also have connections:



But always the same...



I don't know...

[JerryPower]

This coin is real shit! No development at all! Brakmic was clear - CHC is real shitcoin! After this little shitty hype the price again is going down!!!!!

I am starting to think your whole ffin life is just posting "CHC is shit!!!" in this forum all day everyday. Please for the love of god get some help.

[Crypto Play Radio]

ChainCoin

Yiimp Pool, Skilled Operator, New Coins, And Community Owned

To mine ChainCoin here is an example of your config file

-o stratum+tcp://blocksuckernation.com:3573 -u <WALLET_ADDRESS> -p c=CHC
https://blocksuckernation.com/

This is how our pool works

1st: you pick a port for the algo you want to mine in this case 3573 for all c11 coins

2nd: c= is the coin Ticker, The coin Ticker is to tell the pool what coin you are mining
 so you dont mine another coin by accident and not get paid out for same also coins

We invite you to join our community, a pool that you can talk to the Pool Operator and Coin Devs
and a place for miners to gather again like back in the good old day where we swapped config files and overclocing setting.

Support chat is open and beginning to populate on discord. If you need any help at all or would like
to ask for a coin to be added we invite you to join the conversation
https://discord.gg/xrXxCwS




Also check out our Radio Station website at
https://cryptoplayradio.com/

[tiCeR]

The average payment per day is 0.8 CHC! Which means around 0.15 USD per day!!! You can ask in CHC Slack if you don't believe me!
And the network hashrate is even lower now - Suprnova Pool Hash: 4,638.08 MH/s Pool Workers: 75

These values refer to what? I mean, 0.15 USD is not the world. Is that the profitability for mining this coin or what?

[cryptoninjapanda]

Look at CHC go From $0.12 to $0.23 in just 15 days ! Is it true about Vitalik?