[SOLD OUT] 1.45 BTC Antminer S1 180GH/S Shipps on Feb 13 (Price Protection)

[BlackLabel_Actual]

Just got UPS my choice notice for shipping. Thanks for the fast Shipment Sushi!

[1714645686]

1714645686

[1714645686]

1714645686

[1714645686]

1714645686

[jimmyl]

Just got UPS my choice notice for shipping. Thanks for the fast Shipment Sushi!

Yours is this batch? And it's shipping?

[BlackLabel_Actual]

I also ordered it before this topic was made, quite literally as soon as the price dropped on the website. So i'm one of the "Early Birds" Sushi was speaking of, so it is shipping.

[visdude]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner. 

[ineedit]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner. 

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

[visdude]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner.  

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

Thanks.  I was expecting some kind of start button in the control panel.  So I presumed right then...that it starts by itself as soon as it's configured (and powered, of course).

I actually have something better than a paper clip here.

[ineedit]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner.  

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

Thanks.  I was expecting some kind of start button in the control panel.  So I presumed right then...that it starts by itself as soon as it's configured (and powered, of course).

I actually have something better than a paper clip here.

Why is it better?

[visdude]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner.  

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

Thanks.  I was expecting some kind of start button in the control panel.  So I presumed right then...that it starts by itself as soon as it's configured (and powered, of course).

I actually have something better than a paper clip here.

Why is it better?

It's an insulated copper wire.  It looks much better.  So it just seems better overall for me.  But it's a matter of preference...or was that meant to be a trick question?

[ineedit]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner.  

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

Thanks.  I was expecting some kind of start button in the control panel.  So I presumed right then...that it starts by itself as soon as it's configured (and powered, of course).

I actually have something better than a paper clip here.

Why is it better?

It's an insulated copper wire.  It looks much better.  So it just seems better overall for me.  But it's a matter of preference...or was that meant to be a trick question?

So no difference to a paperclip held in by insulating tape.


A trick....hmmm....my life is too short to play games...

[BlackLabel_Actual]

I personally like the paperclip and insulating tape better, I would be using it anyways to secure it in place.

[AlexeyK]

HI All


probably orders  from now will be shipped on 13.2

queue for 12.2  already full .

FYI

[philipma1957]

HI All


probably orders  from now will be shipped on 13.2

queue for 12.2  already full .

FYI

I am not to familiar with the antminer threads so may I ask how you know that Feb 12th is done and that  We are at Feb 13th. 


My order was placed Feb 7th.

  So If I may ask how do I go about figuring out if I am in Feb 11, Feb 12, Or Feb 13th ship day?
 Where do I get to see a queue list?
I realize you may work for the company and that is how you know the list.  But My order for 2.9btc 2 s-1's Is important to me So I thought I would ask.

 TIA PHIL

[AlexeyK]

HI All


probably orders  from now will be shipped on 13.2

queue for 12.2  already full .

FYI

I am not to familiar with the antminer threads so may I ask how you know that Feb 12th is done and that  We are at Feb 13th. 


My order was placed Feb 7th.

  So If I may ask how do I go about figuring out if I am in Feb 11, Feb 12, Or Feb 13th ship day?
 Where do I get to see a queue list?
I realize you may work for the company and that is how you know the list.  But My order for 2.9btc 2 s-1's Is important to me So I thought I would ask.

 TIA PHIL

i don't have access directly to queue but spoke with Sushi earlier today
if you order on 7.2 i guess it will be shipped on 12.2 or earlier

only orders from today will be shipped from 13.2 .

[visdude]

I'm not much of a geek and definitely coding-challenged.  I kinda figured out the tutorial on the S1 setup/configuration but for the life of me, I can't figure out how to start it.  Will it just start by itself as soon as the S1 is configured?  I have only used BFGMiner with my current assortment of hardware.  The tutorial pretty much explained everything except how to start the miner.  

Simple, Jumpstart the PSU with a paperclip and turn the switch on.

Thanks.  I was expecting some kind of start button in the control panel.  So I presumed right then...that it starts by itself as soon as it's configured (and powered, of course).

I actually have something better than a paper clip here.

Why is it better?

It's an insulated copper wire.  It looks much better.  So it just seems better overall for me.  But it's a matter of preference...or was that meant to be a trick question?

So no difference to a paperclip held in by insulating tape.


A trick....hmmm....my life is too short to play games...

Oh, I wasn't aware that a paper clip held in by an insulating tape is no different from a thermostat wire held by a tape.  You're a genius.  I yield.

[philipma1957]

HI All


probably orders  from now will be shipped on 13.2

queue for 12.2  already full .

FYI

I am not to familiar with the antminer threads so may I ask how you know that Feb 12th is done and that  We are at Feb 13th. 


My order was placed Feb 7th.

  So If I may ask how do I go about figuring out if I am in Feb 11, Feb 12, Or Feb 13th ship day?
 Where do I get to see a queue list?
I realize you may work for the company and that is how you know the list.  But My order for 2.9btc 2 s-1's Is important to me So I thought I would ask.

 TIA PHIL

i don't have access directly to queue but spoke with Sushi earlier today
if you order on 7.2 i guess it will be shipped on 12.2 or earlier

only orders from today will be shipped from 13.2 .

  Thank you for the answer.

 Best regards Phil

[jimmyl]

BTC went to 102 at btc-e

[Furious]

BTC went to 102 at btc-e

someone made ​​a big mistake.wanted to sell for 700 but sold for 70




Sushi, Please reply for my message into your PM

[philipma1957]

BTC went to 102 at btc-e

someone made ​​a big mistake.wanted to sell for 700 but sold for 70




Sushi, Please reply for my message into your PM

which is why I don't trade on btc-e. Most other exchanges   would take the error and auto correct it to  the lowest price which at the time was around 665.

  btc-e is 'f'-d up for not having that in their software.

 vircurex.com  cex.io  both auto correct to the  actual  current price.  so if I  misplace the decimal  point I don't get fucked.

current price is now around 630

[jimmyl]

Are our S1 shipped simultaneously? My site is 5-7 hours flight to Bitman base so when can I expect to get it?

[Buchi-88]

@sushi

they already know when the Antminer U1 are available to them?

regards