[ANN] [MINT] Mintcoin (POS / 5%) [NO ICO] [Fair distro, community maintained]

[BitcoinNational]

getpeerinfo

"version" : 0,
"subver" : "",

who are they?
what wallet is that?

"version" : 60007,
"subver" : "/MintCoin:0.7.2/",

that's what it should read

(i am v2001)

[1714497769]

1714497769

[1714497769]

1714497769

[1714497769]

1714497769

[presstab]

getpeerinfo

"version" : 0,
"subver" : "",

who are they?
what wallet is that?

"version" : 60007,
"subver" : "/MintCoin:0.7.2/",

that's what it should read

(i am v2001)

I have always seen things like this in a lot of wallets I use. To someone like me, I wouldn't mind being able to disconnect from a peer like this using RPC. I might add a new command for this soon.

[BlackPanda]

I thought the coin was dead after it reach to 3 satoshi some months ago .......... but now i wish i bought 1 million of it ......

I also think that way ... if yesterday I did not sell this coin at a low price .. maybe I've been rich today

[iqlimasyadiqa]

I thought the coin was dead after it reach to 3 satoshi some months ago .......... but now i wish i bought 1 million of it ......

I also think that way ... if yesterday I did not sell this coin at a low price .. maybe I've been rich today

and we should become rich together. eliminating the price too low and now I think "if time can be played back" remains positve and always smiling...

[wmikrut]

I upgraded wallet to latest version and now it won't hold even 1 connection. It keeps flickering between 0 and 1.

I've tried importing a fresh block chain that I d/l from here and deleting the chain. Makes no difference.
Even tried it both ways with & without conf file.

listen=1
addnode=76.111.80.147
addnode=78.234.66.199
addnode=71.89.162.42
addnode=46.40.98.56
addnode=46.4.95.176
addnode=78.27.187.7
addnode=187.233.181.141
addnode=71.164.166.156
addnode=99.136.121.44
addnode=115.29.243.40
addnode=178.78.11.32
addnode=37.229.38.196
maxconnections=100
server=1
daemon=1
addnode=144.76.220.169
addnode=213.114.153.118
addnode=1.80.150.168
addnode=184.72.188.245
addnode=162.243.4.85
addnode=115.28.140.128
addnode=113.135.64.107
addnode=27.33.253.164
addnode=209.190.29.2
addnode=155.210.52.121
addnode=62.178.31.2
addnode=91.228.76.83
addnode=115.29.224.192
addnode=128.199.255.172
addnode=223.199.16.58
addnode=23.253.55.13
addnode=162.243.70.241
addnode=107.170.26.18
addnode=115.28.177.49
addnode=93.78.120.235
addnode=218.77.97.176
addnode=182.112.134.112
addnode=155.210.52.121
addnode=94.194.77.2
addnode=5.255.66.44
addnode=115.28.129.207

What is your operating system?
Please try deleting everything within the %appdata% Mintcoin folder except for the wallet.dat file. (make sure to back this up somewhere else as well)

Once you have done that - delete the wallet you have downloaded.

Download the bootstrap here:
https://link.getsync.com/#f=Mintcoin_daily&sz=12E8&t=1&s=SNTPNBS7OXQM5TZCEPZLPAGSB37LAJUF&i=CW6PY36ZAT2EPXWS7DTBOJMHJGMOXANPQ&v=2.0

and extract everything into the %appdata% Mintcoin folder (you should see a bunch of files in there / not just another folder called mintcoin)

Download the latest wallet here:
https://drive.google.com/folderview?id=0ByiwIYtArulmfkpWTUlhWHRsTzdFN0tkSG5HX1pMd2pqNTFVNmw0YjRPS3BrcWo5cW80Z2c&usp=sharing&tid=0ByiwIYtArulmNS0yZ3BDWHlZTlk#list

Open the wallet - the entire process should take just a few hours (including wallet syncing) before your wallet is running again.

Let me know if this works?

No joy on this list of addnodes.

Same problem here.  I cannot get a node to work properly on the newest version.
I didn't bootstrap... that would just save me time not having to download the whole blockchain.

Right now we just need a list of peers to connect to.

[GKar]

I upgraded wallet to latest version and now it won't hold even 1 connection. It keeps flickering between 0 and 1.

I've tried importing a fresh block chain that I d/l from here and deleting the chain. Makes no difference.
Even tried it both ways with & without conf file.

listen=1
addnode=76.111.80.147
addnode=78.234.66.199
addnode=71.89.162.42
addnode=46.40.98.56
addnode=46.4.95.176
addnode=78.27.187.7
addnode=187.233.181.141
addnode=71.164.166.156
addnode=99.136.121.44
addnode=115.29.243.40
addnode=178.78.11.32
addnode=37.229.38.196
maxconnections=100
server=1
daemon=1
addnode=144.76.220.169
addnode=213.114.153.118
addnode=1.80.150.168
addnode=184.72.188.245
addnode=162.243.4.85
addnode=115.28.140.128
addnode=113.135.64.107
addnode=27.33.253.164
addnode=209.190.29.2
addnode=155.210.52.121
addnode=62.178.31.2
addnode=91.228.76.83
addnode=115.29.224.192
addnode=128.199.255.172
addnode=223.199.16.58
addnode=23.253.55.13
addnode=162.243.70.241
addnode=107.170.26.18
addnode=115.28.177.49
addnode=93.78.120.235
addnode=218.77.97.176
addnode=182.112.134.112
addnode=155.210.52.121
addnode=94.194.77.2
addnode=5.255.66.44
addnode=115.28.129.207

What is your operating system?
Please try deleting everything within the %appdata% Mintcoin folder except for the wallet.dat file. (make sure to back this up somewhere else as well)

Once you have done that - delete the wallet you have downloaded.

Download the bootstrap here:
https://link.getsync.com/#f=Mintcoin_daily&sz=12E8&t=1&s=SNTPNBS7OXQM5TZCEPZLPAGSB37LAJUF&i=CW6PY36ZAT2EPXWS7DTBOJMHJGMOXANPQ&v=2.0

and extract everything into the %appdata% Mintcoin folder (you should see a bunch of files in there / not just another folder called mintcoin)

Download the latest wallet here:
https://drive.google.com/folderview?id=0ByiwIYtArulmfkpWTUlhWHRsTzdFN0tkSG5HX1pMd2pqNTFVNmw0YjRPS3BrcWo5cW80Z2c&usp=sharing&tid=0ByiwIYtArulmNS0yZ3BDWHlZTlk#list

Open the wallet - the entire process should take just a few hours (including wallet syncing) before your wallet is running again.

Let me know if this works?

No joy. OS is Windows 8.1 64bit.
wallet is acting like there is no dns/peer nodes on it's version.     
 
Having some peers as addnodes that are confirmed on latest version should fix this problem.   
 

[crzybilly]

No joy. OS is Windows 8.1 64bit.
wallet is acting like there is no dns/peer nodes on it's version.     
 
Having some peers as addnodes that are confirmed on latest version should fix this problem.   
 

here's my current addnode
addnode=202.96.138.245
addnode=174.62.75.38
addnode=91.121.177.181
addnode=137.147.205.84
addnode=198.50.243.84
addnode=173.62.210.40
addnode=178.33.109.17
addnode=217.23.13.138
addnode=71.1.8.242
addnode=92.11.85.139
addnode=176.37.23.74
addnode=24.191.227.173

[BobTheVeg]

I managed to solve my issue.

Here is the proof :
https://i.imgur.com/xyphkY6.png

Here is what I did :

• Downloaded version v2.0.0.1 instead of using v2.0.0.0.
• Created the MintCoin.conf file containing the code below.
• Created firewall rule to allow incoming connection on port 12788.

Code:

listen=1
maxconnections=100
addnode=1.80.150.168
addnode=107.170.26.18
addnode=113.135.64.107
addnode=115.28.129.207
addnode=115.28.140.128
addnode=115.28.177.49
addnode=115.29.224.192
addnode=115.29.243.40
addnode=128.199.255.172
addnode=144.76.220.169
addnode=155.210.52.121
addnode=155.210.52.121
addnode=162.243.4.85
addnode=162.243.70.241
addnode=178.78.11.32
addnode=182.112.134.112
addnode=184.72.188.245
addnode=187.233.181.141
addnode=209.190.29.2
addnode=213.114.153.118
addnode=218.77.97.176
addnode=223.199.16.58
addnode=23.253.55.13
addnode=27.33.253.164
addnode=37.229.38.196
addnode=46.4.95.176
addnode=46.40.98.56
addnode=5.255.66.44
addnode=62.178.31.2
addnode=71.164.166.156
addnode=71.89.162.42
addnode=76.111.80.147
addnode=78.234.66.199
addnode=78.27.187.7
addnode=91.228.76.83
addnode=93.78.120.235
addnode=94.194.77.2
addnode=99.136.121.44

[wmikrut]

No joy. OS is Windows 8.1 64bit.
wallet is acting like there is no dns/peer nodes on it's version.     
 
Having some peers as addnodes that are confirmed on latest version should fix this problem.   
 

here's my current addnode
addnode=202.96.138.245
addnode=174.62.75.38
addnode=91.121.177.181
addnode=137.147.205.84
addnode=198.50.243.84
addnode=173.62.210.40
addnode=178.33.109.17
addnode=217.23.13.138
addnode=71.1.8.242
addnode=92.11.85.139
addnode=176.37.23.74
addnode=24.191.227.173

Ty Sir!   
I now have 9 connections to the network!

[cryptomommy]

Good morning everyone!
I have a trouble ticket on facebook with a Linux user who is unable to execute the mintcoin wallet install - any suggestions?

[crzybilly]

Good morning everyone!
I have a trouble ticket on facebook with a Linux user who is unable to execute the mintcoin wallet install - any suggestions?

can you provide more details?

[cryptomommy]

Good morning everyone!
I have a trouble ticket on facebook with a Linux user who is unable to execute the mintcoin wallet install - any suggestions?

can you provide more details?

Here is the information I have so far - let me know if you need anything else:
hi. mintcoin-qt 2.o.o.1 doesn't work for limux

linux

I've extracted it file from the compressed file. when I run it, a file with a filename like "&#@*&#" is created and nothing else happens

i have both the qt and the mintcoind d in the same folder as well

@C@w@8

That's the file created in the same folder when qt is run

empty 0B

[MostlyGhostly]

I upgraded wallet to latest version and now it won't hold even 1 connection. It keeps flickering between 0 and 1.

I've tried importing a fresh block chain that I d/l from here and deleting the chain. Makes no difference.
Even tried it both ways with & without conf file.

listen=1
addnode=76.111.80.147
addnode=78.234.66.199
addnode=71.89.162.42
addnode=46.40.98.56
addnode=46.4.95.176
addnode=78.27.187.7
addnode=187.233.181.141
addnode=71.164.166.156
addnode=99.136.121.44
addnode=115.29.243.40
addnode=178.78.11.32
addnode=37.229.38.196
maxconnections=100
server=1
daemon=1
addnode=144.76.220.169
addnode=213.114.153.118
addnode=1.80.150.168
addnode=184.72.188.245
addnode=162.243.4.85
addnode=115.28.140.128
addnode=113.135.64.107
addnode=27.33.253.164
addnode=209.190.29.2
addnode=155.210.52.121
addnode=62.178.31.2
addnode=91.228.76.83
addnode=115.29.224.192
addnode=128.199.255.172
addnode=223.199.16.58
addnode=23.253.55.13
addnode=162.243.70.241
addnode=107.170.26.18
addnode=115.28.177.49
addnode=93.78.120.235
addnode=218.77.97.176
addnode=182.112.134.112
addnode=155.210.52.121
addnode=94.194.77.2
addnode=5.255.66.44
addnode=115.28.129.207

Connection went out because these are dead nodes. Delete the peer.dat and start it again. Though no one can sync either, better extract the private key and create a raw transaction without downloading the whole blockchain.

[crzybilly]

Here is the information I have so far - let me know if you need anything else:
hi. mintcoin-qt 2.o.o.1 doesn't work for limux

linux

I've extracted it file from the compressed file. when I run it, a file with a filename like "&#@*&#" is created and nothing else happens

i have both the qt and the mintcoind d in the same folder as well

@C@w@8

That's the file created in the same folder when qt is run

empty 0B

sounds corrupted.

[mchrist152]

Would anybody be so kind as to help me with a mintcoin wallet compile issue?

I'm using the commandline to try and compile the unix version of the wallet on a Debian system.  Everything compiles but I'm running into the following linker errors:

...
build/moc_repairwalletdialog.o build/qrc_bitcoin.o    -L/usr/lib/x86_64-linux-gnu -lminiupnpc /home/mikech/github/Mintcoin-Desktop-Wallet/src/leveldb/libleveldb.a /home/mikech/github/Mintcoin-Desktop-Wallet/src/leveldb/libmemenv.a -lrt -lssl -lcrypto -ldb_cxx -lboost_system -lboost_filesystem -lboost_program_options -lboost_thread -lpthread -lQtGui -lQtNetwork -lQtCore
build/init.o: In function `bool CDB::Read<std::string, CBlockLocator>(std::string const&, CBlockLocator&)':
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x122): undefined reference to `Dbt::Dbt(void*, unsigned int)'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x12e): undefined reference to `Dbt::Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x394): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x3a0): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x454): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x460): undefined reference to `Dbt::~Dbt()'
build/db.o: In function `CDBEnv::CDBEnv()':
db.cpp:(.text+0x38f): undefined reference to `DbEnv::DbEnv(unsigned int)'
build/db.o: In function `CDBEnv::EnvShutdown()':
db.cpp:(.text+0x12fb): undefined reference to `DbEnv::close(unsigned int)'
...

From what I've read on the web I need to change the version of my compiler to fix this issue but nowhere does anybody say what version of compiler is required.  I'm currently running gcc 4.9.2.  Can anybody tell me what version of compiler they are using to successfully compile the unix version of the wallet?

Thanks in Advance,

mchrist152

[GKar]

Still can't under windows 8.1 64bit and windows 7 32 bit get v2.0.0.1 to sync.

win7:
deleted peers.dat and wallet.dat.
result: no joy. connection keeps blinking  between zero and one connections and won;t sync

Win8:
tried same as above and aslo the following:
start from scratch, use woking block fgrom prior to upgrade; the daily torrent block update.
Even tired all this on 1 computer on a diffenet ISP.

results: no change to problem

Have tried all the addnodes from last 2 pages that were said to work. Did not for me.

[crzybilly]

Still can't under windows 8.1 64bit and windows 7 32 bit get v2.0.0.1 to sync.

win7:
deleted peers.dat and wallet.dat.
result: no joy. connection keeps blinking  between zero and one connections and won;t sync

Win8:
tried same as above and aslo the following:
start from scratch, use woking block fgrom prior to upgrade; the daily torrent block update.
Even tired all this on 1 computer on a diffenet ISP.

results: no change to problem

Have tried all the addnodes from last 2 pages that were said to work. Did not for me.

Is windows firewall enabled? does your AV have a firewall built into it?

[fonzerrellie]

my new MINT win7 wallet works great, just staked the other day

[Fuzzbawls]

I'll address a couple issues here:

First, the user having issues with the linux wallet:
Without knowing more details, like what distro, I'd say that your downloaded package is corrupt. I just tested downloading, extracting, and running both the Qt wallet and headless daemon on my clean install of Mint Linux. Both packages are fine and produce a valid binary file.

Suggested to redownload and if issue persists, provide me with more details as to your OS distro.

Second, users having issues syncing:
At the moment, without a valid peers.dat or proper MintCoin.conf, syncing will not work. This is a known issue and it is being worked on from 2 viable angles. There is a workaround, and that involves using addnode=x in your MintCoin.conf file.

There are currently a LOT of nodes that are still using the old version, for what reason I have no clue. The new version (and proper blockchain) is designed to outright reject any client/node running on the old version. You absolutely MUST be running the new version (protocolversion : 60007) in order to sync the blockchain.

Now, on to the workaround I mentioned: MintCoin.conf (note: not mintcoin.conf, not Mintcoin.conf...MintCoin.conf). This file goes in the same folder/directory as your wallet.dat, peers.dat, debug.log, etc. and should be formatted as follows:

Code:

rpcuser=x
rpcpassword=y
rpcallowip=127.0.0.1
addnode=198.50.243.84
addnode=185.16.59.233
addnode=50.168.101.34
addnode=101.174.162.119
addnode=74.197.221.45
addnode=176.37.23.74

x and y above are whatever you want. One of those nodes is mine, and unless my wallet is offline for whatever reason, it WILL accept connections provided you are attempting to connect with the correct version. Now, attempting to connect repeatedly with the WRONG version will result in nodes banning you for a period of time, if this happens then you'll have to update to the new version and wait for bans to be released. So again, you absolutely MUST be running the new version to do ANYTHING with MintCoin.


I have tested and verified working all of the above multiple times on multiple machines. I obviously cannot test every OS/build (especially with the countless linux distros), so if you're still having issues I'm going to need raw dumps of your debug.log and MintCoin.conf files to further assist

[mchrist152]

Would anybody be so kind as to help me with a mintcoin wallet compile issue?

I'm using the commandline to try and compile the unix version of the wallet on a Debian system.  Everything compiles but I'm running into the following linker errors:

...
build/moc_repairwalletdialog.o build/qrc_bitcoin.o    -L/usr/lib/x86_64-linux-gnu -lminiupnpc /home/mikech/github/Mintcoin-Desktop-Wallet/src/leveldb/libleveldb.a /home/mikech/github/Mintcoin-Desktop-Wallet/src/leveldb/libmemenv.a -lrt -lssl -lcrypto -ldb_cxx -lboost_system -lboost_filesystem -lboost_program_options -lboost_thread -lpthread -lQtGui -lQtNetwork -lQtCore
build/init.o: In function `bool CDB::Read<std::string, CBlockLocator>(std::string const&, CBlockLocator&)':
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x122): undefined reference to `Dbt::Dbt(void*, unsigned int)'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x12e): undefined reference to `Dbt::Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x394): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x3a0): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x454): undefined reference to `Dbt::~Dbt()'
init.cpp:(.text._ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_[_ZN3CDB4ReadISs13CBlockLocatorEEbRKT_RT0_]+0x460): undefined reference to `Dbt::~Dbt()'
build/db.o: In function `CDBEnv::CDBEnv()':
db.cpp:(.text+0x38f): undefined reference to `DbEnv::DbEnv(unsigned int)'
build/db.o: In function `CDBEnv::EnvShutdown()':
db.cpp:(.text+0x12fb): undefined reference to `DbEnv::close(unsigned int)'
...

From what I've read on the web I need to change the version of my compiler to fix this issue but nowhere does anybody say what version of compiler is required.  I'm currently running gcc 4.9.2.  Can anybody tell me what version of compiler they are using to successfully compile the unix version of the wallet?

Thanks in Advance,

mchrist152

Ok, it turns out that it wasn't the version of the compiler after all but the way I compiled Berkeley DB. I had to add the following arguments to the Berkeley DB configure command:
../dist/configure --enable-cxx --disable-shared --with-pic
That did the trick.  Seems like every time I post to this board I figure out the answer shortly there after.

So it built and it's running but it's not connecting to other nodes.  I'm not sure why.  It's running in a virtual machine so maybe there is something blocking it but other apps are having no problems.  Any ideas?