[GPUC] GPU Coin | Mandatory Wallet Update

[j23a]

OK, so you have 2 cards. You'll need to mod your bat file to include settings for both, something like:

Code:

vertminer.exe --scrypt-vert -o (pool info)  -I 20,20 -w 256,256 --lookup-gap 2,2 --thread-concurrency 8193,8193 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --gpu-powertune +20,+20

PLEASE don't use that one as-is - I pulled it as an example from a reddit thread, and it probably won't match your card (although it might). You can see that the values are seperated by commas, one setting for each card. I only have 1 GPU myself, so I am no expert, but been reading up in anticipation of my second one arriving later this month.

Rit.

I tried it. Still got the errors. What I'm going to do right now is turn the computer off and take out one of the GPUs and see how that does.

[nanoprobe]

The ADL does not match OpenCL devices is basically telling you there's more than one OpenCL device in your machine, and the bat file is not correct for them. What is your setup exactly?

I have two Radeon r9 290x. 6Gb of ram. And I'm controlling it through remote desktop from my other computer. I mean, I don't know what else to add.

Have you tried the .bat file I posted on previous page?

6gb of RAM is plenty mine only use 1.5gb of RAM total according to task manager

Just woke up. Have you tried reinstalling your video driver?

[sammy007]

2600 blocks, why?

Because coin launch is not their best, LOL. That's simply stupid. previous launches was damn stupid.

[SP4RK7]

OK, so you have 2 cards. You'll need to mod your bat file to include settings for both, something like:

Code:

vertminer.exe --scrypt-vert -o (pool info)  -I 20,20 -w 256,256 --lookup-gap 2,2 --thread-concurrency 8193,8193 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --gpu-powertune +20,+20

PLEASE don't use that one as-is - I pulled it as an example from a reddit thread, and it probably won't match your card (although it might). You can see that the values are seperated by commas, one setting for each card. I only have 1 GPU myself, so I am no expert, but been reading up in anticipation of my second one arriving later this month.

Rit.

You only need to have different settings for multiple cards if they are different GPU e.g 290x and 280x

mine both work fine from the example .bat file I posted

[Ritual]

OK, so you have 2 cards. You'll need to mod your bat file to include settings for both, something like:

Code:

vertminer.exe --scrypt-vert -o (pool info)  -I 20,20 -w 256,256 --lookup-gap 2,2 --thread-concurrency 8193,8193 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --gpu-powertune +20,+20

PLEASE don't use that one as-is - I pulled it as an example from a reddit thread, and it probably won't match your card (although it might). You can see that the values are seperated by commas, one setting for each card. I only have 1 GPU myself, so I am no expert, but been reading up in anticipation of my second one arriving later this month.

Rit.

You only need to have different settings for multiple cards if they are different GPU e.g 290x and 280x

mine both work fine from the example .bat file I posted

I stand corrected - thank you for that info, it's useful for me as well

[djm34]

Hello everybody,

does anyone know how does p2pool know how many coin there is in a block?

I started mining now because PPLNS is based on share so mining 6hour at 150khs will give me the same amount of share than mining with 6x150khs when 20k coin block will be out. But is there a formula to update in p2pool or it will automatically detect the 20k coin block and automatically calculate new payout via PPLNS ratio with share already done?
What I mean: is number of coin in block hardcoded in p2pool or just "detected"?

It is taken from the last block which was found on the network (not just the pool) and it makes the assumption the next will have the same amount of coin (never had any problem on pandacoin for which the reward was random).

[lemfuture]

And now my question...solo mining it

I have set up my bat file to connct to 127.0.0.1:6857 (I have also added this as the RPC port to the wallet conf file), and this is what I get:



Accepteds is showing as 0, but I do see a "best share" value. Is this thing actually mining?

Rit.

Yup

accepted 0 hardware error 1

[nanoprobe]

OK, so you have 2 cards. You'll need to mod your bat file to include settings for both, something like:

Code:

vertminer.exe --scrypt-vert -o (pool info)  -I 20,20 -w 256,256 --lookup-gap 2,2 --thread-concurrency 8193,8193 --gpu-memclock 1500,1500 --gpu-engine 1000,1000 --gpu-powertune +20,+20

PLEASE don't use that one as-is - I pulled it as an example from a reddit thread, and it probably won't match your card (although it might). You can see that the values are seperated by commas, one setting for each card. I only have 1 GPU myself, so I am no expert, but been reading up in anticipation of my second one arriving later this month.

Rit.

You only need to have different settings for multiple cards if they are different GPU e.g 290x and 280x

mine both work fine from the example .bat file I posted

I stand corrected - thank you for that info, it's useful for me as well

That + sign in front of the 20 for gpu-powertune could also be a problem. Not needed. The setting is + by default.

[JwTdd]

Hello everybody,

does anyone know how does p2pool know how many coin there is in a block?

I started mining now because PPLNS is based on share so mining 6hour at 150khs will give me the same amount of share than mining with 6x150khs when 20k coin block will be out. But is there a formula to update in p2pool or it will automatically detect the 20k coin block and automatically calculate new payout via PPLNS ratio with share already done?
What I mean: is number of coin in block hardcoded in p2pool or just "detected"?

It is taken from the last block which was found on the network (not just the pool) and it makes the assumption the next will have the same amount of coin (never had any problem on pandacoin for which the reward was random).

"never had any problem on pandacoin for which the reward was random"

Eh fine then, thank you.

[masterkiller]

GPU has been added at Coin-Swap.net

[glockjs]

"what block are we on?" http://gpu.dedicatedpool.com/index.php?page=statistics&action=pool

[NickPortland]

"what block are we on?" http://gpu.dedicatedpool.com/index.php?page=statistics&action=pool

So what time approx. GMT are we going to get full rewards?

[tagged]

GPU has been added at Coin-Swap.net

You mean https://coin-swap.net/market/gpu, your URL tag forgot the hyphen.

[ocminer]

https://gpu.suprnova.cc

The Day 1 GPU Pool
No fee
DDoS Proof
VDIff + Stratum
Look at our "Getting Started" Category on the left to configure/Download your miner

[tagged]

"what block are we on?" http://gpu.dedicatedpool.com/index.php?page=statistics&action=pool

So what time approx. GMT are we going to get full rewards?

I figure 12am EST, add what, 5 hours to that, looking like 15 hours from now

[nanoprobe]

4 out of 5 of my miners just show

"Error -5: Enqueing Kernel onto command queue. <clEnqueueNDRangeKernel>"

Any ideas.

One miner is fine, 2 miners have one card working and show this error for the other cards, 2 miners show "OFF" for all cards and this error

Thanks

If you have multiple cards and some are shown as "off" you need to add a device setting to your bat and/or conf file. IE: if you have 4 cards you need to add -d 0,1,2,3 to your bat file. If you are using a conf file you need to add "device" : "0,1,2,3"  Adding it to the conf file is a little tricky. Add the text at the bottom between the last entry and the } at the end. This it what it looks like in my conf file.

"kernel-path" : "user/local/bin",
"device" : "0,1,2,3"
}

Spacing is critical so make sure it matches exactly. Hope this helps someone.

[bananahunter67]

[NickPortland]

"what block are we on?" http://gpu.dedicatedpool.com/index.php?page=statistics&action=pool

So what time approx. GMT are we going to get full rewards?

I figure 12am EST, add what, 5 hours to that, looking like 15 hours from now

Still?
I saw people talking about 12 hours from then 6 hours ago!

Ok I've done my pro-bono mining already, joinin back in a few hours...

[Ritual]

And now my question...solo mining it

I have set up my bat file to connct to 127.0.0.1:6857 (I have also added this as the RPC port to the wallet conf file), and this is what I get:



Accepteds is showing as 0, but I do see a "best share" value. Is this thing actually mining?

Rit.

Yup

accepted 0 hardware error 1

Yep, it's the 0 accepted I'm worrying about. Rewards are obviously zero at the moment, which is fine, but am I actually finding any blocks? I can't bloody tell

[bj240z]

And now my question...solo mining it

I have set up my bat file to connct to 127.0.0.1:6857 (I have also added this as the RPC port to the wallet conf file), and this is what I get:

https://i.imgur.com/1qPSjVB.gif

Accepteds is showing as 0, but I do see a "best share" value. Is this thing actually mining?

Rit.

Yup

accepted 0 hardware error 1

Yep, it's the 0 accepted I'm worrying about. Rewards are obviously zero at the moment, which is fine, but am I actually finding any blocks? I can't bloody tell

Accepted will only come in when you actually solve a block.  Until that point, there is nothing to see!