[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[aaronsace]

Hi, I haven't reveived the payment for mining block 206227, why? I have received revenue for only block 206210, but i have mined for one hour the block 206227 but nothing

I assume that you mean Zcash? If you only mined for one hour then why would you be guaranteed a share of block 206227?

1 hour 22 minute gap:
206227 - 11:38
206210 - 10:16

Why would you only mine for an hour anyway?

[tonante]

Yes, zcash,
206227   Confirmed   anonymous   22/10 11:38:23 (UTC)   6,148,608.43   10.003831   49,188,867   107,925,411   219.41
206210   Confirmed   wonchoen   22/10 10:16:02 (UTC)   6,999,717.69   10.001210   55,997,742   8,902,325   15.90
I have mined for 1 hour with nicehash from 10:00 to 11:00 and I have received nothing for the block 206227:
15514907   2017-10-22 13:40:50 (UTC)   Debit_AE   Confirmed         n/a   0.06886408
15496216   2017-10-22 10:20:15 (UTC)   Credit_AE   Confirmed         206210   0.06886408

[aaronsace]

Yes, zcash,
206227   Confirmed   anonymous   22/10 11:38:23 (UTC)   6,148,608.43   10.003831   49,188,867   107,925,411   219.41
206210   Confirmed   wonchoen   22/10 10:16:02 (UTC)   6,999,717.69   10.001210   55,997,742   8,902,325   15.90
I have mined for 1 hour with nicehash from 10:00 to 11:00 and I have received nothing for the block 206227:
15514907   2017-10-22 13:40:50 (UTC)   Debit_AE   Confirmed         n/a   0.06886408
15496216   2017-10-22 10:20:15 (UTC)   Credit_AE   Confirmed         206210   0.06886408

Stop mining on NiceHash; practice on your computer first before you give away your money.

[tonante]

I am not incompetent, I was not given the share that was supposed to be about 0.5 zec, I only received the quota for block 206210:
15496216   2017-10-22 10:20:15 (UTC)   Credit_AE   Confirmed         206210   0.06886408

[aaronsace]

I am not incompetent, I was not given the share that was supposed to be about 0.5 zec, I only received the quota for block 206210:
15496216   2017-10-22 10:20:15 (UTC)   Credit_AE   Confirmed         206210   0.06886408

You stopped mining way too early. You know the payment systems is PPLNS; you quit 38 minutes before it was even found so your shares obviously counted for nothing. You can't just jump in on the start of the blocks then quit; that's the whole point of the PPLNS system.

Put simply, keep mining. Also, you will need to mine at least 24 hours to compensate for bad luck.

[tonante]

so if I do not mining until the end of the block I don't have anything? my gpus at that time mining ethereum

[aaronsace]

so if I do not mining until the end of the block I don't have anything? my gpus at that time mining ethereum

It's not that easy to cheat the PPLNS system.

[tonante]

so, if apart from nicehash, my gpus mine zcash until the end of the block I would have been entitled to my sharing quota?

[aaronsace]

so, if apart from nicehash, my gpus mine zcash until the end of the block I would have been entitled to my sharing quota?

Yes, just mine with a continuous steady hashrate for hours.

[rikipiki]

Hello all, I have a problem with wallet management, I already added PAYMENT ADDRESS and PAYOUT TO section is still Gray with no info. When I'm trying to Cash out im receiving a message: You have no payout address set.
What am I doing wrong?

Thanks

[Call_Me_Bambi]

Looking forward to trying the first release:
https://github.com/zawawawa/GatelessGateSharp

On github he says that "GatelessGateSharp" superseds "Gateless Gate". Now there is a Windows x64 version of "Gateless Gate", has anyone tried it and if so how does it compare to the other SGminer-gm for Monero - I know I could just do it but would like to see what others have found, and there is no Windows binary for "GatelessGateSharp" and I don't know how to compile it.

[z0n0]

Will you add BTG soon after the fork?

[DjiN]

Hi there!
I recently noticed that my MultiMiner says on the top of the benchmark list and at the bottom line that specific miner is the most profitable and at the same time it does mine with different one as active. It looks to me like it is not refreshing the profits in the benchmark list and at the bottom line where suppose to be the active miner so I hope this doesn't result in mining coins which are not the best choice at the moment. Am I doing something wrong? Can someone explain why is that? Thanks in advance!

[aaronsace]

Hi there!
I recently noticed that my MultiMiner says on the top of the benchmark list and at the bottom line that specific miner is the most profitable and at the same time it does mine with different one as active. It looks to me like it is not refreshing the profits in the benchmark list and at the bottom line where suppose to be the active miner so I hope this doesn't result in mining coins which are not the best choice at the moment. Am I doing something wrong? Can someone explain why is that? Thanks in advance!

Please post issues on GitHub. I've sent you a PM; you're just misunderstanding.

[cryptapus]

Greetings!

Myriadcoin has released a new upgrade:

https://www.reddit.com/r/myriadcoin/comments/77mtcj/myriadcoin_01420/

Please update your mining nodes.

Thanks!

[junforever]

Can anybody help me with this, according to the miner my accepted shared are 4131/4131 but in the dashboard of my account the invalid number is 47.62% of my shares, why the long difference? which is wrong? If the miner is wrong could you tell me please which are the possible causes of so many rejected percentage please?

I am using this ccminer (this one ccminer_cuda9)
https://github.com/djm34/ccminer-msvc2015/releases
This is the one that gave me the best performance, I have 3 gpus: gtx 1070 G1 rev1 2 gtx 1080 ti ftw3, my oc settings are: 99 core - 600 mem (1070),  60 core 500 mem(1080), 85 core 500 mem (1080) I am mining with the lyra2z algorithm, I am in windows 7 and my driver version of nvidia is 385.69. Thanks for the help 

[Silverrune1997]

Can anybody help me with this, according to the miner my accepted shared are 4131/4131 but in the dashboard of my account the invalid number is 47.62% of my shares, why the long difference? which is wrong? If the miner is wrong could you tell me please which are the possible causes of so many rejected percentage please?
https://i.imgur.com/1OWD2g4.png
I am using this ccminer (this one ccminer_cuda9)
https://github.com/djm34/ccminer-msvc2015/releases
This is the one that gave me the best performance, I have 3 gpus: gtx 1070 G1 rev1 2 gtx 1080 ti ftw3, my oc settings are: 99 core - 600 mem (1070),  60 core 500 mem(1080), 85 core 500 mem (1080) I am mining with the lyra2z algorithm, I am in windows 7 and my driver version of nvidia is 385.69. Thanks for the help 

According to a former MPH post "djm34's ccminer build sends stale shares and this is expected result. Maybe asking this to ccminer dev would be more helpful." "Djm34 build sends normal shares and previous block's shares. Those previous block's shares are totally useless and treated as invalid. So it's intended action actually."

[fonyo]

Mr MPH,

Have you found an alternative solution yet to provide a live API instead of the cloudflare cached one? Please do. Thanks.

[Blisk]

I tried today mining on hub.miningpoolhub.com with Sgminer 5.5
But all I get is
most likely you put wrong URL, forgot to add port, or have not setup a worker.

And I have this in config file and ports are opened.

{
"pools" : [
{
"poolname" : "neoscrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12012",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "neoscrypt"
},
{
"poolname" : "x15",
"url" : "stratum+tcp://hub.miningpoolhub.com:12009",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "bitblock"
},
{
"poolname" : "x13",
"url" : "stratum+tcp://hub.miningpoolhub.com:12008",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "marucoin-mod"
},
{
"poolname" : "x11",
"url" : "stratum+tcp://hub.miningpoolhub.com:12007",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "darkcoin-mod"
},
{
"poolname" : "myriadcoin-groestl",
"url" : "stratum+tcp://hub.miningpoolhub.com:12005",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "myriadcoin-groestl"
},
{
"poolname" : "keccak",
"url" : "stratum+tcp://hub.miningpoolhub.com:12003",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "maxcoin"
},
{
"poolname" : "scrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12001",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "10"
},
{
"poolname" : "scryptn",
"url" : "stratum+tcp://hub.miningpoolhub.com:12002",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11"
}
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}

[champ_pu]

problem on zcoin pool ? getting half haterate