[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[sypher9]

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

[Blisk]

Nobody helps here 

[aaronsace]

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

You're not getting 257 MHs on the pool; you are even droping off at some points.

MiningPoolHub can look into it if you are sure that it is running without error the whole time.
Provide the link to the CCMiner binary that you are using and the command options. Also, try a different CCMiner on your machine.

[aaronsace]

Nobody helps here 

The cheek!

[aaronsace]

Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really  looking for a good multi switch European mining pool close to Holland.

You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.

Thanks

That's the address, try it out:
hub.miningpoolhub.com:17001

[Tao1123]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

[aussiegwapo]

whats happening with ethereum mining pool

[ereoleg]

The pool of the etherium died?

[cocopuffs99]

My Dashboard for ethereum is saying 0.00 MHS even though my miner says shares are being accepted. I hope this is just a display issue and that I will be paid my submitted shares. Please let me know if I need to point my miner to a different pool.

[funnyboy027]

I also have the same problem with eth pool, showing 0 hashrate

[empathist]

Etherium pool zero hashrate problem.


http://img.techpowerup.org/171026/capture.png

http://img.techpowerup.org/171026/capture2.png

[aaronsace]

Most likely just a front end issue with the Ethereum pool as the miner isn't reporting fault.

Just have to wait for MiningPoolHub to fix it.

[moronFromouterSpace]

According to etherscan last block mined 2mins ago.  so defo frontend.

[jackbox]

Same here all miners showing no has on dashboard but they are all online and running. Hope we are getting credit.

[empathist]

Dashboard is working now, waiting for transactions to be calculated 

[aussiegwapo]

ether pool if fixed again

[DrX]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

[sypher9]

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

You're not getting 257 MHs on the pool; you are even droping off at some points.

MiningPoolHub can look into it if you are sure that it is running without error the whole time.
Provide the link to the CCMiner binary that you are using and the command options. Also, try a different CCMiner on your machine.

Thanks! This solved my problem. I switched from CCminer Palgin to CCminer 2.2.1 (TPruvotcuda9) and I am now mining at 230 MHs according to mining app and 227 MHs according to the pool.

[cryptapus]

Hi!

A required update for Myriadcoin has been released:

https://www.reddit.com/r/myriadcoin/comments/78wjp4/myriadcoin_01421/

We found a critical consensus issue.

Kind Regards,

[Tao1123]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.