papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 09, 2017, 11:02:09 AM |
|
I'm getting weird low hash rate when mining lyra2rev2 vert and mona I have 7x270 Mh/s workers so it should be around 1890 mh/s I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not http://oi65.tinypic.com/2lnwc42.jpgAs you can see it never goes over 1100 while it should reach 1800 Using Alexis ccminer one of my workers output : [2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! [2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! [2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) [2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! [2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 [2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 [2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W)
|
|
|
|
l33twannabe
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 09, 2017, 11:11:39 AM |
|
Aaronsace, could you please let me know how much time of 24 hours of mining goes for donation purposes ? I don't mind it at all, but just would like to know that.
Also, are these the only algos available on MPH atm: cryptonight,decred,ethash,equihash,groestl,lbry,lyra2z,neoscrypt,pascal,sia,sib (defauls taken from mininpoolhub.bat) ?
|
|
|
|
Little Miner
Newbie
Offline
Activity: 19
Merit: 0
|
|
December 09, 2017, 11:21:54 AM |
|
Hi, I am new to MPH. I am not able to find any readme or guidlines how to properly setup multi algo mining. I created hub worker, turned auto exchange to one coin and now I am supposed to use port 12XXX in my worker. But I am not able to find which port exactly should I use. How about changing between algos like Equihash or Lyra2v2? Can you confirm, that the right config would look like this? ccminer-x64.exe -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:12XXX -u user.hubminername -p x Thanks. Hi, You can set these ports for Equihash and Lyra2re2, Equ=12023 and Lyra= 12018.
|
|
|
|
CryptoSidd
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 09, 2017, 11:43:45 AM |
|
I'm getting weird low hash rate when mining lyra2rev2 vert and mona I have 7x270 Mh/s workers so it should be around 1890 mh/s I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not http://oi65.tinypic.com/2lnwc42.jpghttp://oi65.tinypic.com/2lnwc42.jpgAs you can see it never goes over 1100 while it should reach 1800 Using Alexis ccminer one of my workers output : [2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! [2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! [2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) [2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! [2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 [2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 [2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W) I have been pointing this out but the pool dev replied to normal replies and not to the real issue here with vertcoin mining on this pool. I have been facing this issue since the day i joined.
|
|
|
|
umsiddiqui
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 09, 2017, 11:45:21 AM |
|
Hello
I am trying to configure the OTP. When i scan the bar code on my phone i get a 6 digit code, but when i enter the code in the OTP feild, it only takes 4 digit. WHY?
Is this the PIN? even when i enter the PIN it doesn't work,
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
December 09, 2017, 11:47:27 AM |
|
Hello
I am trying to configure the OTP. When i scan the bar code on my phone i get a 6 digit code, but when i enter the code in the OTP feild, it only takes 4 digit. WHY?
Is this the PIN? even when i enter the PIN it doesn't work,
PIN is 4 digit, OTP is 6 digit. If you are seeing PIN input text field, then OTP is not enabled yet.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
December 09, 2017, 11:55:40 AM |
|
I'm getting weird low hash rate when mining lyra2rev2 vert and mona I have 7x270 Mh/s workers so it should be around 1890 mh/s I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not http://oi65.tinypic.com/2lnwc42.jpgAs you can see it never goes over 1100 while it should reach 1800 Using Alexis ccminer one of my workers output : [2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! [2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! [2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) [2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! [2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 [2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 [2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W) I have been pointing this out but the pool dev replied to normal replies and not to the real issue here with vertcoin mining on this pool. I have been facing this issue since the day i joined. It is old known issue. Lyra2 type algo's hashrate is lower than actual from ccminer because their shares come in to poo quite lately. This issue doesn't happen on sgminer. Also some ccminer users don't experience this issue at all. I don't know the core difference but I think there's some nvidia's inner bottleneck for lyra2 hashing. Something like memory bandwidth maybe. There's no way to fix from pool side unless pool manipulate hashrate.
|
|
|
|
l33twannabe
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 09, 2017, 12:09:53 PM |
|
I still can't figure it out:
Miner BTC USD PLN ----- --- --- --- MultiPoolMiner 0,00046 ±13% (0,00041-0,00053) 7,34192 ±13% (6,47766-8,32149) 26,18210 ±13% (23,10006-29,67535) {CcminerPalgin-Lyra2RE2, CpuminerJayddeeAesavx-Lyra2z} 0,00074 ±56% (0,00048-0,00115) 11,75358 ±56% (7,55099-18,29515) 41,91454 ±56% (26,92766-65,24252)
What am I getting now ? 0,00046 ±13% (0,00041-0,00053) or 0,00074 ±56% (0,00048-0,00115) ?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 09, 2017, 12:26:25 PM |
|
I'm getting weird low hash rate when mining lyra2rev2 vert and mona I have 7x270 Mh/s workers so it should be around 1890 mh/s I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not http://oi65.tinypic.com/2lnwc42.jpgAs you can see it never goes over 1100 while it should reach 1800 Using Alexis ccminer one of my workers output : [2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! [2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! [2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) [2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! [2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 [2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 [2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W) I have been pointing this out but the pool dev replied to normal replies and not to the real issue here with vertcoin mining on this pool. I have been facing this issue since the day i joined. It is old known issue. Lyra2 type algo's hashrate is lower than actual from ccminer because their shares come in to poo quite lately. This issue doesn't happen on sgminer. Also some ccminer users don't experience this issue at all. I don't know the core difference but I think there's some nvidia's inner bottleneck for lyra2 hashing. Something like memory bandwidth maybe. There's no way to fix from pool side unless pool manipulate hashrate. Thanks a lot for info Any one can help with better miner for mining lyra2rev2 on nvidia/linux?
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
December 09, 2017, 12:35:16 PM |
|
it is the log in the log folder ?
i notice a post somewhere about dev fee on nicehash not working and restart miner
could be that the problem
i edited 1 computer miners with -nofee 1 gonna check if it change anything
nofee did not help 126times sins yesturday 0,00 PH/s 00 Days 02 Hours 43 Minutes 126 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal carlo0000.gtx1070x4 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal carlo0000.gtx1070x4 -dpsw x -dcoin sc -dcri 100 -nofee 1 -platform 2 0,00 PH/s 00 Days 02 Hours 26 Minutes 121 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal carlo0000.gtx1070x4 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal carlo0000.gtx1070x4 -dpsw x -dcoin sc -dcri 200 -nofee 1 -platform 2 gonna post on github later
|
|
|
|
aaronsace
|
|
December 09, 2017, 12:39:39 PM |
|
Aaronsace, could you please let me know how much time of 24 hours of mining goes for donation purposes ? I don't mind it at all, but just would like to know that.
Also, are these the only algos available on MPH atm: cryptonight,decred,ethash,equihash,groestl,lbry,lyra2z,neoscrypt,pascal,sia,sib (defauls taken from mininpoolhub.bat) ?
10 minutes per day. Supported algorithms are listed on the homepage: https://miningpoolhub.com/
|
|
|
|
l33twannabe
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 09, 2017, 01:10:05 PM |
|
Aaronsace, could you please let me know how much time of 24 hours of mining goes for donation purposes ? I don't mind it at all, but just would like to know that.
Also, are these the only algos available on MPH atm: cryptonight,decred,ethash,equihash,groestl,lbry,lyra2z,neoscrypt,pascal,sia,sib (defauls taken from mininpoolhub.bat) ?
10 minutes per day. Supported algorithms are listed on the homepage: https://miningpoolhub.com/Ok, thank you. So -donate 2 would give 20 minutes, right ? Also, and sorry for repeating myself, what about the other question: Miner BTC USD PLN ----- --- --- --- MultiPoolMiner 0,00046 ±13% (0,00041-0,00053) 7,34192 ±13% (6,47766-8,32149) 26,18210 ±13% (23,10006-29,67535) {CcminerPalgin-Lyra2RE2, CpuminerJayddeeAesavx-Lyra2z} 0,00074 ±56% (0,00048-0,00115) 11,75358 ±56% (7,55099-18,29515) 41,91454 ±56% (26,92766-65,24252) What am I getting now ? 0,00046 ±13% (0,00041-0,00053) or 0,00074 ±56% (0,00048-0,00115) ? Why are there always two earnings outputs and which should I look at ?
|
|
|
|
Pyroboby7
Member
Offline
Activity: 94
Merit: 10
|
|
December 09, 2017, 01:10:33 PM |
|
On another forum I frequent, people were asking about mining pools. A lot of people said, oh NiceHash, I use them and they are great, its so easy! Well, I responded that I used a pool that would allow you to auto exchange. I was called a fool and such, I laughed it off. Woke up the next day to read about the hack. Several others posted about it and asked where they could go.
I told em Miningpoolhub.com and a few said they would check it out. I even PM'd one of the guys I knew that lost his coin from NiceHash to come over to us. Don't know if he did.
This pool has done well. I learned to pull coins after losing my ufocoin when I mined for a bit, then stopped.
SCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERT SCAM ALERT OH, AND SCAM ALERT This imbecile/criminal is telling us to use Megaminer? Ha. It works FINE, as long as you are using YOUR computer to mine to HIS addresses. I changed one thing. ONE THING: i SPECIFIED MY BITCOIN ADDRESS INSTEAD OF HIS, PROGRAM LOCKED UP, REFUSED TO WORK. GET LOST, SCAMMER. Who the fuck are you and what the fuck are you talking about, dipshit? I dont even know why you quoted me for something I didnt even talk about. How bout you get lost, bitch.
|
XMG - 95AySiw3GaiTxf5xWBnZLLWkJ9orhyagbx
|
|
|
CryptoSidd
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 09, 2017, 01:14:59 PM |
|
I'm getting weird low hash rate when mining lyra2rev2 vert and mona I have 7x270 Mh/s workers so it should be around 1890 mh/s I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not http://oi65.tinypic.com/2lnwc42.jpghttp://oi65.tinypic.com/2lnwc42.jpgAs you can see it never goes over 1100 while it should reach 1800 Using Alexis ccminer one of my workers output : [2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! [2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! [2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) [2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! [2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 [2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 [2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz [2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W) I have been pointing this out but the pool dev replied to normal replies and not to the real issue here with vertcoin mining on this pool. I have been facing this issue since the day i joined. It is old known issue. Lyra2 type algo's hashrate is lower than actual from ccminer because their shares come in to poo quite lately. This issue doesn't happen on sgminer. Also some ccminer users don't experience this issue at all. I don't know the core difference but I think there's some nvidia's inner bottleneck for lyra2 hashing. Something like memory bandwidth maybe. There's no way to fix from pool side unless pool manipulate hashrate. Okay so would you you like to suggest because Vertcoin is profitable to mine but because of this error we are losing profits. I tried One click miner too and same issue. It will be really helpful.
|
|
|
|
SergDo
Newbie
Offline
Activity: 18
Merit: 0
|
|
December 09, 2017, 01:42:06 PM |
|
I confirm the same problem with Lyra2RE2. The total my hashrate is 542Mh, but MPH shows me max 450 (the minning is already over a day). Invalid shares less than 1%
|
|
|
|
Joshwaa
|
|
December 09, 2017, 02:02:17 PM |
|
I have not been able to find it on the site, but is there a address and port for auto switch with Mona and Vert for nVidia?
|
Like what I said : 1JosHWaA2GywdZo9pmGLNJ5XSt8j7nzNiF Don't like what I said : 1FuckU1u89U9nBKQu4rCHz16uF4RhpSTV
|
|
|
Lercker
|
|
December 09, 2017, 02:08:55 PM |
|
I have not been able to find it on the site, but is there a address and port for auto switch with Mona and Vert for nVidia?
stratum+tcp://hub.miningpoolhub.com:17018, this is if you want to just mine Mona and Vert. No need for an actual auto switch, though you can select it under Hub workers if you want.
|
|
|
|
Joshwaa
|
|
December 09, 2017, 02:12:00 PM |
|
I have not been able to find it on the site, but is there a address and port for auto switch with Mona and Vert for nVidia?
stratum+tcp://hub.miningpoolhub.com:17018, this is if you want to just mine Mona and Vert. No need for an actual auto switch, though you can select it under Hub workers if you want. Thanks for the quick reply. Where did you find that at on the site? I might be going blind.
|
Like what I said : 1JosHWaA2GywdZo9pmGLNJ5XSt8j7nzNiF Don't like what I said : 1FuckU1u89U9nBKQu4rCHz16uF4RhpSTV
|
|
|
Jamessuperfun
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 09, 2017, 02:12:48 PM Last edit: December 09, 2017, 10:17:59 PM by Jamessuperfun |
|
Hi This is miningpoolhub operator 1. Sorry for late reply. I am receiving hundreds of emails, skype chats these days. Also bitcointalk, reddit posts are growing rapidly. I've replied to all email questions. Pardon me, I can't answer all questions posted in community too. I've found that I can't move pool forward if I reply all community posts. There's many requests like coin addition, feature improvements to do. I hope expert members to help new members each other. Please contact me via contact@miningpoolhub.com email if you need my private advice or immediate service faults like account problem, or pool errors. I can't handle all general mining questions and settings, pool usage questions. 2. Here's my task list I'm focusing. - one page miner dashboard will come soon. - ETN or new profitable coin addition - improve FAQ page and texts all over the pool to guide new miners. I would like to add small explanation popup text all over the website. 3. Thank you for your trust, and patience during the previous 80 minutes of website crash. I've been running pool for almost 4 years but such long emergency crash didn't happen. I had really tough day too. I understand you worry about your coins regarding the hack. I recommend you to withdraw coins periodically. I don't mean that pool will be hacked, but pool is not intended for wallet service. Some coin pools can be closed if mining is meaningless too. Keep your precious coin in your pocket. Hey man, thanks for your work. I think we all understand that everything must be a bit hectic with the whole NiceHash situation. I have a question also. For some reason my mined Etherium doesn't seem to be going into my wallet, specifically on one miner. Using AwesomeMiner (+MiningPoolHub) everything seems to work fine, mines Etherium and Siacoin, both report hashrates on the MiningPoolHub website within a few minutes of starting and transactions come through. Running MultiPoolMiner and setting it up to use MiningPoolHub causes only my Siacoin hashrate to update on the website, while Etherium does nothing, even though the miner is showing it's mining both for hours. The hashrates I'm getting seem to be higher with MultiPoolMiner than AwesomeMiner. Any idea why this might all be happening?
|
|
|
|
Destrega
Newbie
Offline
Activity: 60
Merit: 0
|
|
December 09, 2017, 02:17:44 PM |
|
Hi This is miningpoolhub operator1. Sorry for late reply. I am receiving hundreds of emails, skype chats these days. Also bitcointalk, reddit posts are growing rapidly. I've replied to all email questions.Pardon me, I can't answer all questions posted in community too. I've found that I can't move pool forward if I reply all community posts. There's many requests like coin addition, feature improvements to do. I hope expert members to help new members each other. Please contact me via contact@miningpoolhub.com email if you need my private advice or immediate service faults like account problem, or pool errors. I can't handle all general mining questions and settings, pool usage questions. 2. Here's my task list I'm focusing. - one page miner dashboard will come soon. - ETN or new profitable coin addition - improve FAQ page and texts all over the pool to guide new miners. I would like to add small explanation popup text all over the website. 3. Thank you for your trust, and patience during the previous 80 minutes of website crash. I've been running pool for almost 4 years but such long emergency crash didn't happen. I had really tough day too. I understand you worry about your coins regarding the hack. I recommend you to withdraw coins periodically. I don't mean that pool will be hacked, but pool is not intended for wallet service. Some coin pools can be closed if mining is meaningless too. Keep your precious coin in your pocket. Thanks for the update, keep up the good work
|
|
|
|
|