[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[halfpipe]

Hello,

I have a doubt if anyone can answer, how does multialgo work with poolhub as different gpu cards have different hashrate for each algo, how does the pool switch between one coin and other more profitable? Considering I am using only ccminer.

[aaronsace]

so i set the donate to 0 and i noticed its still mining on someone elses username.. :/

Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal aaronsace.multipoolminer -xpsw x
Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal fonyo.multipoolminer -xpsw x


how do i completly turn off the donation thing..

Minimum is 10 minutes. Feel free to hack the code in notepad if you feel we deserve nothing.

[Darktall]

so i set the donate to 0 and i noticed its still mining on someone elses username.. :/

Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal aaronsace.multipoolminer -xpsw x
Bin\CryptoNight-Claymore\NsGpuCNMiner.exe -r -1 -mport 13333 -xpool stratum+ssl://us-east.cryptonight-hub.miningpoolhub.com:20580 -xwal fonyo.multipoolminer -xpsw x


how do I completely turn off the donation thing.

Hey now man, ppl built this program for you to use, I think 10 min is not a lot really (it is if you multiple of course) but for you personally its nothing (probably is since you are complaining). If you don't want to donate feel free to make one yourself.

[aarons6]

Minimum is 10 minutes. Feel free to hack the code in notepad if you feel we deserve nothing.

sorry didnt know there was a minimum, it just says default is 24, figured i could set it to 0..

ill just leave it as it is..

[Call_Me_Bambi]

Hi
This is miningpoolhub operator

1. Sorry for late reply.
I am receiving hundreds of emails, skype chats these days. Also bitcointalk, reddit posts are growing rapidly.
I've replied to all email questions.
Pardon me, I can't answer all questions posted in community too.
I've found that I can't move pool forward if I reply all community posts. There's many requests like coin addition, feature improvements to do.
I hope expert members to help new members each other.

<SNIP>

Thanks for the update. This is why MiningPoolHub is the best pool ever, great support from Dev and a great community helping each other.

[konqueror]

I'm getting weird low hash rate when mining lyra2rev2 vert and mona
I have 7x270 Mh/s workers so it should be around 1890 mh/s

I know pool shows hash rate based on accepted shares, but its way lower than my workers hash rate
Its ok when I mine equihash and hash rates are almost same, but on lyra2re2 its not


http://oi65.tinypic.com/2lnwc42.jpg

As you can see it never goes over 1100 while it should reach 1800


Using Alexis ccminer
one of my workers output :

Code:

[2017-12-09 14:16:30] [S/A/T]: 0/456/456, diff: 0.779, 276.77MH/s yes! 
[2017-12-09 14:16:30] [S/A/T]: 0/457/457, diff: 0.760, 276.77MH/s yes! 
[2017-12-09 14:16:34] [S/A/T]: 0/458/458, diff: 10.370, 276.77MH/s yes! 
[2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 22.96MH/s 
[2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz 
[2017-12-09 14:16:42] GPU#7:Gigabyte P106-100, 56C(F:50%) 1792/2999MHz(76W) 
[2017-12-09 14:16:42] [S/A/T]: 0/459/459, diff: 4.908, 276.77MH/s yes! 
[2017-12-09 14:16:46] lyra2v2 block 838574, diff 79706.439 
[2017-12-09 14:16:53] lyra2v2 block 838575, diff 79902.176 
[2017-12-09 14:17:07] [S/A/T]: 0/460/460, diff: 0.780, 276.76MH/s yes! 
[2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 23.02MH/s 
[2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 0.3MH/W, 0.013MH/Mhz 
[2017-12-09 14:17:08] GPU#1:Gigabyte P106-100, 54C(F:50%) 1789/2999MHz(76W)

I have been pointing this out but the pool dev replied to normal replies and not to the real issue here with vertcoin mining on this pool.
I have been facing this issue since the day i joined.

It is old known issue.
Lyra2 type algo's hashrate is lower than actual from ccminer because their shares come in to poo quite lately.

This issue doesn't happen on sgminer. Also some ccminer users don't experience this issue at all.
I don't know the core difference but I think there's some nvidia's inner bottleneck for lyra2 hashing. Something like memory bandwidth maybe.

There's no way to fix from pool side unless pool manipulate hashrate.

Thanks a lot for info
Any one can help with better miner for mining lyra2rev2 on nvidia/linux?

I use ccminer tpruvot 2.2.2 for lyra2rev2. Slightly lower hashrate than the Alexis ccminer but what I see in the miner console is the same as on the pool.

[OdinYggd]

I've noted a similar discrepancy in hashrate, and not just on Lyra2v2. Many times it seems like the dials on the pool dashboard are only displaying a fraction of what the miner is actually doing.

For instance right now, I have my rig running tpruvot ccminer v2.2.3 at 28MH/s. There are shares being submitted a couple of times a minute all in this ballpark. But the dial on the dashboard is saying that I am only getting 2MH/s for some reason, which is obviously well below what it should be.

The hashrates are displayed correctly on the worker configuration page, with my big miner currently showing 25.8 MH/s on the worker config versus the 28 MH shown in the miner console. I've been mining since dogecoin back in 2013, and am used to there being some slippage between what the miner says and what the pool reports.

[Falke]

@aaronsace

got a problem with multipoolminer.
After a while when 1 or 2 miners have been started (...benchmark...) every miner which follows will "fail".

Log just says:

Code:

Dieser Befehl kann aufgrund des folgenden Fehlers nicht ausgeführt werden: Zugriff verweigert.
    + CategoryInfo          : InvalidOperation: (:) [Start-Process], InvalidOperationException
    + FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
    + PSComputerName        : localhost

Zugriff verweigert. = access denied

When I restart the whole Powershell script the same miner which failed before now starts without problem (until the error appears again after a few miner starts).

Any ideas?

Thanks for your support

[wishxy]

Does anybody use MPH All In One Miner downloaded from MPH GitHub?
Also, question for devs/admins, why is updated last time a year ago?

https://github.com/miningpoolhub/all-in-one-miner

[BitBot.V2]

Does anybody use MPH All In One Miner downloaded from MPH GitHub?
Also, question for devs/admins, why is updated last time a year ago?

https://github.com/miningpoolhub/all-in-one-miner

 I would use one of the other miner that have active development, personally I use Multipoolminer. If you would like to only mine on MPH with it, delete the other pools it uses from the 'pools' folder, it reduces profitability slightly but payout would be more frequent (i.e. easier to reach payout threshold on 1 pool than on 4).

[CryptAtomeTrader44]

On another forum I frequent, people were asking about mining pools.  A lot of people said, oh NiceHash, I use them and they are great, its so easy!  Well, I responded that I used a pool that would allow you to auto exchange.  I was called a fool and such, I laughed it off.  Woke up the next day to read about the hack.  Several others posted about it and asked where they could go. 

I told em Miningpoolhub.com and a few said they would check it out.  I even PM'd one of the guys I knew that lost his coin from NiceHash to come over to us.  Don't know if he did.

This pool has done well.  I learned to pull coins after losing my ufocoin when I mined for a bit, then stopped.

SCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERTSCAM ALERT

SCAM ALERT

OH, AND

SCAM ALERT

This imbecile/criminal is telling us to use Megaminer?

Ha.

It works FINE, as long as you are using YOUR computer to mine to HIS addresses.

I changed one thing. ONE THING: i SPECIFIED MY BITCOIN ADDRESS INSTEAD OF HIS, PROGRAM LOCKED UP, REFUSED TO WORK.

GET LOST, SCAMMER.

Where are the LOGS ?

What these LOGS tells you ?

All the answers are in the LOGS. Everytime, you must look at the logs !

I don't think what you say is exact. I'm running another system (Linux Ubuntu) and profit switching with nvOC. We can consult all the logging. I think megaminers dev makes the same.

Coma back with logs traces before shouting alert SCAM.

NB : I don't use this program but i don't think it is a scam.

[papampi]

I confirm the same problem with Lyra2RE2. The total my hashrate is 542Mh, but MPH shows me max 450 (the minning is already over a day).  Invalid shares less than 1%

What miner you use?
You getting 20% less than miner shows
I'm getting less than 60% ... 40% loss ...

[wishxy]

Ok, now I find there is another MPH AIOM from aaronsace, last updated 20 days ago.

Here is link:

https://github.com/aaronsace/MultiPoolMiner/releases


Also find those two from other developers:

http://www.multiminerapp.com/

https://github.com/luke-jr/bfgminer


Mega Miner is here:
https://bitcointalk.org/index.php?topic=2059039.0

Awesom Miner
http://www.awesomeminer.com/default.aspx

[papampi]

I use ccminer tpruvot 2.2.2 for lyra2rev2. Slightly lower hashrate than the Alexis ccminer but what I see in the miner console is the same as on the pool.

Thanks will give it a shot ...

[mj_23]

I'm having the same problem with Vertcoin as somebody already mentioned. Pool dashboard and stats show me that my hashrate is zero and graph doesn't show any activity on this coin at all. I do see activity on other coins.

I use Multipoolminer which is running at CCminer Lyra2Re2 algo now. And I do get new Vertcoins on my balance... However no indication on pool graphs/stats yet...

What do I do wrong?
Do I have to configure hub workers in any certain way?

[jb7032]

For me I have 2 windows machines running nemo's miner and they are now showing up for Vertcoin. They didnt show up yesterday. However I have 2 rigs running SMOS and they dont show up on worker page at all. The interesting thing is I am getting around what what-to-mine estimates for 24 hour return on Vertcoin so I know my smos rigs are working as my two windows machines can't make that much Vertcoin in a day.

[decod]

I am mining vertcoin and i have 31 mh/s but on website it shows 15mh/s and highest it shows 26mh/s.
I am not submitting any bad share so why does it not show actual hashrate? Also vertcoin mining takes long time to show any info. Anyone can help?

Which version ccminer do you use for this coin? There are different ccminer version for Lyra2.
Try version from Alex78.

[dvk]

Hi guys
I'm trying to connect MPH via ccminer but every algo except equihash gives me an error stratum autentication failed. My bat file is speified for 8 algos, they are also set in hub workers page.
Here's my bat file, username and workersname are the same as in pool account

:start
ccminer -r 0 -a cryptonight -o stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:12024 -u rdc01.1 -p x
ccminer -r 0 -a groestl -o stratum+tcp://hub.miningpoolhub.com:12004 -u rdc01.1 -p x
ccminer -r 0 -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:12005 -u rdc01.1 -p x
ccminer -r 0 -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u rdc01.1 -p x
ccminer -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u rdc01.1 -p x
ccminer -r 0 -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u rdc01.1 -p x
ccminer -r 0 -a equihash -o stratum+tcp://europe.equihash-hub.miningpoolhub.com:12023 -u rdc01.1 -p x
ccminer -r 0 -a ethash -o stratum+tcp://europe.ethash-hub.miningpoolhub.com:12020 -u rdc01.1 -p x
timeout 1
goto start

What am i doing wrong?

[aaronsace]

Hi guys
I'm trying to connect MPH via ccminer but every algo except equihash gives me an error stratum autentication failed. My bat file is speified for 8 algos, they are also set in hub workers page.
Here's my bat file, username and workersname are the same as in pool account

:start
ccminer -r 0 -a cryptonight -o stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:12024 -u rdc01.1 -p x
ccminer -r 0 -a groestl -o stratum+tcp://hub.miningpoolhub.com:12004 -u rdc01.1 -p x
ccminer -r 0 -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:12005 -u rdc01.1 -p x
ccminer -r 0 -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u rdc01.1 -p x
ccminer -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u rdc01.1 -p x
ccminer -r 0 -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u rdc01.1 -p x
ccminer -r 0 -a equihash -o stratum+tcp://europe.equihash-hub.miningpoolhub.com:12023 -u rdc01.1 -p x
ccminer -r 0 -a ethash -o stratum+tcp://europe.ethash-hub.miningpoolhub.com:12020 -u rdc01.1 -p x
timeout 1
goto start

What am i doing wrong?

That's what's supposed to happen.

[OdinYggd]

Currently equihash is the most profitable mine for nvidia cards, so your script should have all algos except equihash fail to connect. This is quite by design.