CryptoDredge 0.27.0 — CUDA Miner

[gerask0]

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

[gerask0]

in any case is the best miner for phi2

[Saphire]

i like this miner 

[dragonmike]

Your performance figures on Neoscrypt are a little optimistic...

Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).

...is anyone able to tell me what I'm doing wrong here or is the advertised speed really bogus? Or at 130% pl with 200+ overclocks?... 

Increase the intensity. Excavator 1.4.4a is still the best miner for neoscrypt.

Isn't 6 the highest already?
Yeah I know Excavator is good. But I'd rather not use Nicehash if I have the choice.

Anyways, that Neoscrypt coin I was looking at turned out to be shit, so back to the drawing board!

[nitrobg]

Your performance figures on Neoscrypt are a little optimistic...

Using latest nVidia drivers, I get 1230 Mh/s on my 1080's at +110/+500 (vs 1330-1390 advertised above). Intensity at default (6).

...is anyone able to tell me what I'm doing wrong here or is the advertised speed really bogus? Or at 130% pl with 200+ overclocks?... 

Increase the intensity. Excavator 1.4.4a is still the best miner for neoscrypt.

Isn't 6 the highest already?
Yeah I know Excavator is good. But I'd rather not use Nicehash if I have the choice.

Anyways, that Neoscrypt coin I was looking at turned out to be shit, so back to the drawing board!

Excavator 1.4.4a can be used on other pools as well. Try increasing intensity of CD, you should be able to get 1.8+MH/s.

[flameelement]

Hi,
How to run power consumption?
Regards.

I'm sorry but I meant by the power consumption monitoring the console output
https://i.imgur.com/QY5e9OW.png

What is exactly parameter to see it in console?

[rgzrgz]

Failover pools please! In miner.cfg or config.txt

[johnreese5895]

This miner is awesome for phi2

[ggillies]

WOW!!!!!  Phi2 on 0.8.3 is SMOKING fast!!!  I'm at 9.8 MH/s per card for my 1080tis ...  Holy COW!

how about power consumption?

I am at 100% power, +75 GPU and +150 Mem clock.  8 X Nvidia 1080ti cards, Awesomeminer on Windows 10, latest NVIDIA drivers.  Cheers.

[cryptodredge]

0.8 to 0.8.2 was a big boost on lyra2z for the gtx1070 (2500 kh/s to 3200 kh/s)

However, 0.8 to 0.8.2 the hashrate regressed on lyra2z for the gtx1070ti (3300 kh/s to 2700 kh/s)

love the improvements.
However since 0.8.2 my 1070 greatly outperforms my 1070ti's on Lyra2z.

1070 avg hash 3954 KH/s
1070ti avg hash 3220 KH/s

any ideas how? I've got 4 different 1070ti's and none come close to my normal 1070....

Could you check v0.8.3?

It's better now thanks, but the 1070 is still doing much better than the 1070ti's 

[08:35:47] INFO  - GPU0 Gigabyte GTX 1070 Ti : 3395KH/s (Avr 3399KH/s) : 22.32KH/W : T=67C Fan=80%
[08:35:47] INFO  - GPU1 EVGA GTX 1070 Ti : 3405KH/s (Avr 3407KH/s) : 22.47KH/W : T=66C Fan=80%
[08:35:47] INFO  - GPU2 Zotac GTX 1070 Ti : 3383KH/s (Avr 3386KH/s) : 23.55KH/W : T=66C Fan=80%
[08:35:47] INFO  - GPU3 Gigabyte GTX 1070 Ti : 3405KH/s (Avr 3399KH/s) : 22.40KH/W : T=66C Fan=80%
[08:35:47] INFO  - GPU4 MSI GTX 1070 : 3973KH/s (Avr 3981KH/s) : 23.20KH/W : T=63C Fan=80%
[08:35:47] INFO  - GPU5 Gigabyte GTX 1060 6GB : 2833KH/s (Avr 2829KH/s) : 21.35KH/W : T=65C Fan=80%
[08:35:47] INFO  - Total hashrate 20.40MH/s

Thanks for your report. We'll try to figure out why it's happening

[cryptodredge]

Is it possible to set PL/tdp in bat file? without MSI afterburner? like in ccminer we can use --plimit , is there anything similar here that we can use?

Unfortunately, it is not possible yet. The task was created. Thanks for your suggestion

[Miro1764n]

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

[Drifttap]

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

This problem only occurs on Crypto dredge from my experiences. Don't go changing your whole hardware configuration on something that came with a miner update. I believe the dev has already said he will be focusing on this issue in the coming updates.

[Coin++]

A Linux version for Cuda 8 ?

[gerask0]

have few cards 1080, and when start it togather on phi2 algo, two of them have lower hash than other, but if i start each card separately, they show the same hashrate

Your CPU is too slow or you do not have enough system memory.

7700k 8gb

[Saponetta]

Any tips on how to increase stability with this miner?
I often get the 1 gpu to reset to default in afterburner then it ends up rebooting the rig. (tried both lowering the intensity and without overclock, basically only kept PL to 75%)

ty

[ripcurrent]

It there a way to change the frequency of the hash rate report, for tuning purposes?

[jebidia]

Rock solid for me.   On phi2:  Evga sc 60 tdp +150 core 0 mem gets around 8.5 mh..gigabyte cards at tdp 60 core +200 mem 0 gets close to the evga

[UpWind]

Helloi I am under ubuntu 16.04 with cuda 9.2

Downloaded and run the latest version (803) but is giving an error:

Code:

$ sudo bash runlyra.sh

./CryptoDredge: error while loading shared libraries: libcares.so.2: cannot open shared object file: No such file or directory
': not a valid identifier `continueKey

Do you know what can I do?

[cryptodredge]

Helloi I am under ubuntu 16.04 with cuda 9.2

Downloaded and run the latest version (803) but is giving an error:

Code:

$ sudo bash runlyra.sh

./CryptoDredge: error while loading shared libraries: libcares.so.2: cannot open shared object file: No such file or directory
': not a valid identifier `continueKey

Do you know what can I do?

Installing libc-ares2 package is as easy as running the following command on terminal: sudo apt-get install libc-ares2