papacheal
Newbie
Offline
Activity: 67
Merit: 0
|
|
September 27, 2018, 12:02:10 AM |
|
# Release 0.9.2 - (September 26, 2018)
* New CryptoNightSaber (BitTube) algorithm * Improve Allium and Phi2 for 1070, 1070 Ti, 1080, 1080 Ti * Allow to set intensity per GPU * Fix failover mechanism * Disable miner to auto-start after system restart * Add crash reporting mechanism. Check Readme for more information
Not sure if others are seeing similar behavior, but the phi2 algo on 0.9.2 (all Windows CUDA builds, using 411.63 drivers) seems to bias performance on GPU0 vs. all the other GPUs on two different rigs. On CD 9.1, I calculated a 5% delta in performance between GPU0 and GPU1 (both identical 1080ti) for phi2. On CD 9.2, this jumps to over 12%. No OC, stock PL. After benchmarking all 6 x 1080ti in a rig, GPU0 always ends up over 1 MH/s better than all the others but only on phi2. Tests on allium, neoscrypt and lyra2z all show expected deltas in performance between GPUs. It almost feels like an optimization was applied in code for phi2 specifically, but they forgot to apply it to any GPU past the first.
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
September 27, 2018, 07:29:51 AM |
|
The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.
It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...
You can get great improvements to HASH when there is this update.
Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.
Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers
I hope soon an update that takes into account the RTX
|
|
|
|
dafuzz_rsa
Newbie
Offline
Activity: 40
Merit: 0
|
|
September 27, 2018, 07:33:47 AM |
|
The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.
It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...
You can get great improvements to HASH when there is this update.
Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.
Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers
I hope soon an update that takes into account the RTX
Sorry to break your bubble bro, not many people are buying RTX for mining. So your alot of miners numbers might a bit off You tried to calculate your capital recovery on those cards? me thinks not
|
|
|
|
darchello2
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 27, 2018, 02:17:58 PM |
|
Hi,
About the API again.. I've read posts on first couple of pages, and I see you said API was fixed, but I keep getting ERR_EMPTY_RESPONSE when I try to access the API. It was set in command line with 0.0.0.0:4000. I am trying to access it from different machine in LAN. CryptoDredge is running on Ubuntu 16.04.5 and CUDA 9.2. I see the output in terminal after the miner starts, that the API server started on given address. I've turned off firewall so closed ports or network isn't the case here. Any help or guidance would be really appreciated.
Thanks
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
September 27, 2018, 04:59:13 PM Last edit: September 27, 2018, 05:12:03 PM by trucobit |
|
The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.
It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...
You can get great improvements to HASH when there is this update.
Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.
Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers
I hope soon an update that takes into account the RTX
Sorry to break your bubble bro, not many people are buying RTX for mining. So your alot of miners numbers might a bit off You tried to calculate your capital recovery on those cards? me thinks not I have not asked for your opinion. The 2080 RTX is faster than 1080ti and with lower power consumption, and that the miners are not optimized. If you do not have one or several, do not speak as if you knew them. I get better HASH with the miners without updating, but it crashes a lot, and I spend less light. You should study better in which you invest your money. I have sold 6 1080 and bought 6 rtx 2080. It is silly not to see that it spends less and that it produces more. And it's not a bubble newie dear, the 2080ti are sold out weeks ago, that's why shipping has been delayed. But I assure you, that the normal 2080, equal and exceeds the 1080ti in HASH for $ 790, and with 20% less consumption. I do the accounts to you ?? . Or make them yourself, more hash and less consumption = more profit A few months ago the 1080ti cost $ 1200 and now they are for $ 500 second-hand, but for a little more I have more power. I have limited power, so the less they consume, the more cards I can put, and they produce more HASH Please save your acid comments for yourself, if you do not have market knowledge. You think that the 2080TI to 1300 $ for the gamers have been exhausted ??, awkward, miners have bought it I profitably calculate it in a way that you do not understand, I use it mainly to mine coins for masternodes and if it's not worth it, I'm the most profitable with Awesome miner and then I buy the coins with those profits. But please, do not be so smart, which certainly is not because of your stupid comment.
|
|
|
|
TurboShane
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 27, 2018, 06:48:04 PM |
|
How long is it going to take to you to make up the extra 300 dollars per card. I bet you could calculate that in years.
|
|
|
|
gerask0
Newbie
Offline
Activity: 258
Merit: 0
|
|
September 27, 2018, 07:10:58 PM |
|
The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.
It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...
You can get great improvements to HASH when there is this update.
Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.
Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers
I hope soon an update that takes into account the RTX
can you test your rtxs on phi2 and lyra2z algo
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
September 27, 2018, 10:08:24 PM |
|
Something is wrong with 0.9.2 and Lyra2REv2 (on 1080 Ti's, but same picture with 1080 and 1070).
First card is pulling the correct 78 MH/s like in 0.9.1
But every next card is pulling less and less MH: 2. card 76 MH/s 3. card 75 MH/s ....8. card 69 MH/s
So a full rig is doing ~15% less hashrate compared to 0.9.1.
Tested with newest NVidia driver and Cuda 9.2 and Cude 10.0 version.
|
|
|
|
gerask0
Newbie
Offline
Activity: 258
Merit: 0
|
|
September 28, 2018, 06:09:40 AM |
|
Something is wrong with 0.9.2 and Lyra2REv2 (on 1080 Ti's, but same picture with 1080 and 1070).
First card is pulling the correct 78 MH/s like in 0.9.1
But every next card is pulling less and less MH: 2. card 76 MH/s 3. card 75 MH/s ....8. card 69 MH/s
So a full rig is doing ~15% less hashrate compared to 0.9.1.
Tested with newest NVidia driver and Cuda 9.2 and Cude 10.0 version.
try to set pcie gen 1 on each of cards in bios
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
September 28, 2018, 09:24:22 AM |
|
It is at Gen 1 on all my rigs and it worked until now. Only the new version of CD shows this strange behavior.
|
|
|
|
mak013
|
|
September 29, 2018, 07:25:45 PM |
|
The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.
It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...
You can get great improvements to HASH when there is this update.
Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.
Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers
I hope soon an update that takes into account the RTX
Sorry to break your bubble bro, not many people are buying RTX for mining. So your alot of miners numbers might a bit off You tried to calculate your capital recovery on those cards? me thinks not I have not asked for your opinion. The 2080 RTX is faster than 1080ti and with lower power consumption, and that the miners are not optimized. If you do not have one or several, do not speak as if you knew them. I get better HASH with the miners without updating, but it crashes a lot, and I spend less light. You should study better in which you invest your money. I have sold 6 1080 and bought 6 rtx 2080. It is silly not to see that it spends less and that it produces more. And it's not a bubble newie dear, the 2080ti are sold out weeks ago, that's why shipping has been delayed. But I assure you, that the normal 2080, equal and exceeds the 1080ti in HASH for $ 790, and with 20% less consumption. I do the accounts to you ?? . Or make them yourself, more hash and less consumption = more profit A few months ago the 1080ti cost $ 1200 and now they are for $ 500 second-hand, but for a little more I have more power. I have limited power, so the less they consume, the more cards I can put, and they produce more HASH Please save your acid comments for yourself, if you do not have market knowledge. You think that the 2080TI to 1300 $ for the gamers have been exhausted ??, awkward, miners have bought it I profitably calculate it in a way that you do not understand, I use it mainly to mine coins for masternodes and if it's not worth it, I'm the most profitable with Awesome miner and then I buy the coins with those profits. But please, do not be so smart, which certainly is not because of your stupid comment. I`m glad to see that you can buy RTX but if devs havent RTX, they cant optimize miner for it, am i right? I can understand why you are changing cards, but without power limits - it`s silly to sell powerful cards to get new that really expensive with little profit grow without miner updates. As for me - i`ll wait about month or two, to see new miner results and price that would move down(i hope so).
|
|
|
|
cryptotamer01
Member
Offline
Activity: 653
Merit: 11
|
|
October 01, 2018, 02:11:36 PM Last edit: October 02, 2018, 10:18:52 AM by cryptotamer01 |
|
Maybe add the x22i algo. There is a bounty for the fastest OpenCl miner. And there will be a fastest CUDA miner bounty too but reward for open source only. https://bitcointalk.org/index.php?topic=5042160.new#new
|
|
|
|
Rican
Newbie
Offline
Activity: 13
Merit: 0
|
|
October 02, 2018, 05:52:35 AM |
|
anyone else noticed lyra2z reading lower on the pool side? Miner side is identical to 0.9.1.
|
|
|
|
netto7
Jr. Member
Offline
Activity: 252
Merit: 4
|
|
October 02, 2018, 03:21:23 PM |
|
x22i is new algo right and what coin use it?
|
|
|
|
Dr_Victor
|
|
October 02, 2018, 05:09:35 PM |
|
x22i is new algo right and what coin use it? SUQA
|
yobit.net is banned from signatures
|
|
|
danspasiva
|
|
October 02, 2018, 06:23:31 PM |
|
x22i is new algo right and what coin use it? coin is most likely a scam, dont waste your time with it
|
|
|
|
tomaroc
Newbie
Offline
Activity: 55
Merit: 0
|
|
October 02, 2018, 08:48:25 PM |
|
Hi,
It work on GTX980 ti ?
|
|
|
|
netto7
Jr. Member
Offline
Activity: 252
Merit: 4
|
|
October 03, 2018, 02:21:59 PM |
|
x22i is new algo right and what coin use it? coin is most likely a scam, dont waste your time with it do you have any clue i think it same as other mineable coin
|
|
|
|
Guio
Jr. Member
Offline
Activity: 36
Merit: 1
|
|
October 03, 2018, 09:56:29 PM |
|
The latest update is great on the Allium algo. My 1080 Ti can now do 10.5Mh/s at 60% power target (150W). That's efficient as heck!
Thanks for the updates!
|
|
|
|
420sam
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 04, 2018, 10:56:51 PM |
|
I got a major hashrate drop in the latest version with Allium on my 1070TIs
|
|
|
|
|