CryptoDredge 0.27.0 — CUDA Miner

[melpheos]

x22i running too hot for reference cards (single fan), decreasing intensity to 5 doesnt work.

Reduce voltage to 0.65v and decrease mem to -600

[1715222453]

1715222453

[1715222453]

1715222453

[1715222453]

1715222453

[vrm42]

How many 1080? What's the speed of a single 1080 please?

With CryptoDredge miner for single GTX1080 I get from 10.5 Mh/s to 11.5 Mh/s at consumption 160-180W depending on GPU model (Palit Gamerock Premium GTX1080 is the best for me)

Way tooo high power consumption. You get 64.7khash/Watt while I get 75.7. Regardless of algo and miner 65% tdp is the best for 1080.
I have 8 kind of 1080s but I use the same settings for all. For some algos there are significant differences between my cards.

[peteycamey]

How many 1080? What's the speed of a single 1080 please?

With CryptoDredge miner for single GTX1080 I get from 10.5 Mh/s to 11.5 Mh/s at consumption 160-180W depending on GPU model (Palit Gamerock Premium GTX1080 is the best for me)

Way tooo high power consumption. You get 64.7khash/Watt while I get 75.7. Regardless of algo and miner 65% tdp is the best for 1080.
I have 8 kind of 1080s but I use the same settings for all. For some algos there are significant differences between my cards.

nope 65% tdp doesnt work well for reference 1080s.  ( major hit in hashrate )

[hbouma]

Thanks for creating this miner! I use it every day!

[umine]

hi, please give advice for setup different intensity for each gpus. (3)
-i N[0,5] N[1,6] N[2,6]   
is correct?

It should type intensity comma separated like devices you like to use.
Here is the example of setting up the intensity for 8GPU rig

Code:

CryptoDredge -a x22i -o YOUR_POOL:PORT -u YOUR_WALLET.WORKER -p c=SUQA,d=0.5 -d 0,1,2,3,4,5,6,7 -i 6,6,6,6,6,6,6,5

[nan931]

Best Nvidia XMR miner out there. Thanks for your work

[infernal1981]

algo x18?

[Vlabur]

Has anyone been able to customize the API?

[crairezx20]

I tried the miner (cryptodredge o.10) my 1080ti gives me higher temp with core +100 and +590 in memory clock but I tried this miner on other GPU but it gives me low temp compared to gtx 1080ti?

That is why I decided to reduce the temp limit from MSIafterburner the hashrate reduced and the temp down but I'm not satisfied because the miner only runs in a few hours then restart.

Could you guys suggest any good settings to prevent my rig from rebooting?

[joseph32]

If you do not mine Ethereum, lower your memory clocks. I have all of my 1080ti's running with 5600 and they are 24/7 100% stable, no restart, nothing.

[Ragnarok01]

 
Many thanks to the creator of this great miner, I'm using it on 1080 ti/1070/1060 and it delivers the best hashrate among any other miners I've tried but I miss one feature: failover pools in a separate file failover.txt! 

[Juniormkl]

CryptoDredge 0.10.0 already added to https://www.minermonitoring.com/ https://www.ethmonitoring.com/ including pool monitoring for Suqa and BCD on icemining.ca



Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[giagge]

Hi , anyone have tested Nvidia 2070 ? Result ? Thanks .

[crairezx20]

If you do not mine Ethereum, lower your memory clocks. I have all of my 1080ti's running with 5600 and they are 24/7 100% stable, no restart, nothing.

Reducing the memory could lead to hash drop?

As of now, my miner stays online but I'm getting some invalid job ID what does it mean?
It looks like I need to reduce the memory clock first and test "I just comparing it to  T-rex which gives me a stable result with less invalid ID"
Could you recommend some mclock and cclock for 1060, 1070 and 1080ti?

[haliy-2017]

How to view statistics through the browser?

[Cryptotourist]

Could you recommend some mclock and cclock for 1060, 1070 and 1080ti?

It's not commonly accepted (mclock -something or 0 is), but on the same rig I have another couple of coin instances running (similar algos), and works fine (no invalid shares).
I don't know of course if it's OK for 1060 & 1070, because I only have 1080 ti's (if you have problems, I would imagine you should lower incrementally the clocks and memory).
mclock: +750
cclock:+ 100
PWlimit: 90%
No temp issues either, and hashrate what is expected+ in any similar algo, with a little bit higher power - than what it should be - consumption.
Works great with with t-rex, but with CryptoDredge even greater  

[cel1697i845]

TEST RTX2080 CryptoDredge v0.11.0 RVN (quick test)
https://youtu.be/S0bYR2KgU9Q

Thanks Developers

[MinerMonitoring]

Added CryptoDredge 0.11 Cuda 9.2/10 versions to https://minermonitoring.com for quick and easy remote deployment

[crairezx20]

It's not commonly accepted (mclock -something or 0 is), but on the same rig I have another couple of coin instances running (similar algos), and works fine (no invalid shares).
I don't know of course if it's OK for 1060 & 1070, because I only have 1080 ti's (if you have problems, I would imagine you should lower incrementally the clocks and memory).
mclock: +750
cclock:+ 100
PWlimit: 90%
No temp issues either, and hashrate what is expected+ in any similar algo, with a little bit higher power - than what it should be - consumption.
Works great with with t-rex, but with CryptoDredge even greater  

Now my rig is stable but do you know how to put the clock and mclock directly to the bat file? I mean I don't want to use MSIafterburner and I'd like to run the cryptodredge in startup everytime the rig rebooting.

Can you give some example of bat file with mclock and cclock?

[luckydoky]

v. 0.11 :



    Improve following algorithms (Up to 4%)
    BCD
    BitCore
    HMQ1725
    Skunkhash
    X17
    Add X16R algorithm
    Add X16S algorithm
    Implement "mining.ping" of Stratum
    Support "client.reconnect" of Stratum (Fix for MiningRigRentals.com)
    Fix several bugs of Stratum