Bitcoin Forum
May 10, 2024, 12:48:11 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 [101] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 »
  Print  
Author Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More  (Read 211435 times)
fmz89
Legendary
*
Offline Offline

Activity: 1766
Merit: 1002



View Profile
January 08, 2020, 04:34:17 AM
 #2001

One Vega 56 referent (64 bios, samsung mem) have hardware errors:
[48C, fan 71%]       ethash: 48.36Mh/s, avg 48.54Mh/s, pool 47.27Mh/s a:9112 r:0 hw:164

Any recomendations?

txs

Not all memory is the same - some can take more aggressive timings, some less.  I would trim back your timings changes to a minimum set (and reduce REF), and build from there:

Code:
--REF 15600 --RFC 248 --RAS 30 --RP 12 --RC 44 --RCDRD 14

This will prob get you to 99.5%+ of your list anyway.  If these still don't work - try reducing REF more (try 11700), then maybe RC, then RP - those are your biggest movers.

Also, are you sure you need 850mv for those settings?  All of my vegas (including the flashed 56) are running 930cclk/1028mclk @ 800mv for 47.4MH/s.

EDIT: Take a look at your temperatures (esp mem) on the two different cards as well.  Higher mem temps cause faster charge decay requiring more frequent refreshes (i.e. lower REF).  Mine do just fine w/ REF=15600, but mem temps are all in the high 50's to low 60's.


txs pbfarmer! With your memtweak timings just finished test 24 hour with 0 hw errors ;-)

HBM temperature is low 70's on all cards (can't do much on that, small room with no window for cooling, just one fan, and few holes for fresh air)

Never tried so low mV (800), i don't have power play table for 800, is it possible to running 800 mV with ppt build for 850 mV?


Yeah you can do 800mv(the lowest voltage on vega gpu) with ont&ppt but applied on newer driver

  ▄█▀                       ▀█▄
 ██           ▄▄ ▄▄           ██
███       ▄ ▄███ ███▄ ▄       ███
████▄   ███ ████ ████ ███   ▄████
 ██████████ ███▀ ▀▀▄▄▄▄▄ ▄██████
  ▀▀███████  ▀▄█████████ ████▀▀
       ███▀▄ ██████▀▀▀ ▄▄
       █▀▄██ ████▄▄█▀▄████
        ████ ▀█████▄▀██▀
        ████ █▄▀█████▄
        ████  ▀▀ █████▀
         ▀▀█      ▀█▀
.REXX.|||
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
███████████▀    ▐███████
███████████    ▄▄█████████
▐██████████▀    ▀▀█████████▌
▐█████████▌       █████████▌
▐███████████    ███████████▌
███████████    ███████████
██████████    ██████████
▀████████▄  ▄████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
███████████████▀▀  █████
████████████▀▀      ██████
▐████████▀▀   ▄▄     ██████▌
▐████▀▀    ▄█▀▀     ███████▌
▐████████ █▀        ███████▌
████████ █ ▄███▄   ███████
████████████████▄▄██████
▀████████████████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
▄▄████████▄▄
▄████████████████▄
▄████████████████████▄
████ ▄▀██████████  █████
██████▄▀▄▀██████  ████████
▐████████▄▀▄▀██  ██████████▌
▐██████████▄▀▄ ████████████▌
▐██████████  ▄▀▄▀██████████▌
████████  ████▄▀▄▀████████
█████  ████████▄▀ ██████
▀████████████████████▀
▀████████████████▀
▀▀▀▀▀▀▀▀▀▀▀▀
|.BUY REXX.
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
sea_of_blocks
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
January 08, 2020, 07:49:53 AM
 #2002

Hey dear dev. any update for amd navi's? other miners have some grin 31 and mtp kernels for navis.

Which miner supports Navi for MTP?
fenomenyaa
Jr. Member
*
Offline Offline

Activity: 127
Merit: 2


View Profile
January 09, 2020, 07:23:13 PM
 #2003

Hey dear dev. any update for amd navi's? other miners have some grin 31 and mtp kernels for navis.

Which miner supports Navi for MTP?
wildrig for mtp
Nightworker88
Newbie
*
Offline Offline

Activity: 64
Merit: 0


View Profile
January 10, 2020, 12:30:10 AM
 #2004

Hello,

I am sure, somebody asked this question,

is it possible to run this miner with R9 290 cards, i have some of them and would like to run this miner not only with my rx cards.

any way to do this?
ku4eto
Jr. Member
*
Offline Offline

Activity: 194
Merit: 4


View Profile
January 10, 2020, 07:56:18 AM
 #2005

Hello,

I am sure, somebody asked this question,

is it possible to run this miner with R9 290 cards, i have some of them and would like to run this miner not only with my rx cards.

any way to do this?
No, the miner does not support the Hawaii cards.
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 11, 2020, 06:57:58 PM
 #2006

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
laik2
Sr. Member
****
Offline Offline

Activity: 652
Merit: 266



View Profile WWW
January 11, 2020, 07:02:32 PM
 #2007

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.

Miners Mining Platform [ MMP OS ] - https://app.mmpos.eu/
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 11, 2020, 07:03:27 PM
 #2008

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.
What power it eat with 50MH?
laik2
Sr. Member
****
Offline Offline

Activity: 652
Merit: 266



View Profile WWW
January 11, 2020, 07:19:54 PM
 #2009

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.
What power it eat with 50MH?
approx 150w @wall

Miners Mining Platform [ MMP OS ] - https://app.mmpos.eu/
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 11, 2020, 07:29:06 PM
 #2010

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.
What power it eat with 50MH?
approx 150w @wall
Hmm, not bad... In compare with RX580...
Thanks for info!

Whant to buy Sapphire Pulse vega 56 for about $350. I should do it?
pbfarmer
Member
**
Offline Offline

Activity: 340
Merit: 29


View Profile
January 12, 2020, 02:00:35 AM
 #2011

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.
What power it eat with 50MH?
approx 150w @wall
Hmm, not bad... In compare with RX580...
Thanks for info!

Whant to buy Sapphire Pulse vega 56 for about $350. I should do it?

Might want to look at the pulse 5700 xt instead for ~$410 (or maybe even pulse 5700 for $340?) - assuming you care about power costs / efficiency.  Nitro would be even better efficiency-wise, but price jump is significant - not sure it's worth it.

I'm not up to speed on the latest state of the drivers/miners for navi (other than TRM team still waiting on a proper toolchain,) but it seems 50+MH/s for the 5700xt is normal for 2/3 the power of a vega
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 12, 2020, 08:43:06 AM
 #2012

Does anybody mines eth with vega 56? What speed and power conpsumption it give?
Yes, ~50Mh
core ~1000 , mem ~950
check pbfarmer posts for amdmemorytweak settings.
What power it eat with 50MH?
approx 150w @wall
Hmm, not bad... In compare with RX580...
Thanks for info!

Whant to buy Sapphire Pulse vega 56 for about $350. I should do it?

Might want to look at the pulse 5700 xt instead for ~$410 (or maybe even pulse 5700 for $340?) - assuming you care about power costs / efficiency.  Nitro would be even better efficiency-wise, but price jump is significant - not sure it's worth it.

I'm not up to speed on the latest state of the drivers/miners for navi (other than TRM team still waiting on a proper toolchain,) but it seems 50+MH/s for the 5700xt is normal for 2/3 the power of a vega
Thanks! I looking on 5700xt, but prices is too high on them on my shops... All 5700xt starts from $450 for me...
Exists Asus vega 56 ROG-STRIX Gaming for $400.
fenomenyaa
Jr. Member
*
Offline Offline

Activity: 127
Merit: 2


View Profile
January 12, 2020, 05:43:32 PM
 #2013

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 12, 2020, 05:47:25 PM
 #2014

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
Thanks for advise! Why 5700 nonxt, and why ref.?
fenomenyaa
Jr. Member
*
Offline Offline

Activity: 127
Merit: 2


View Profile
January 12, 2020, 09:10:21 PM
 #2015

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
Thanks for advise! Why 5700 nonxt, and why ref.?
Xt's more expensive ,not less chance to memory won't go over (900mhz,5700non xt's 950mhz)refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)no idea nitro,strix and red devil(bu these are expensive already).
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 12, 2020, 09:12:16 PM
 #2016

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
Thanks for advise! Why 5700 nonxt, and why ref.?
Xt's more expensive ,not less chance to memory won't go over (900mhz,5700non xt's 950mhz)refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)no idea nitro,strix and red devil(bu these are expensive already).
So you recommend to buy nonxt 5700 blower? Any manufacter?
fenomenyaa
Jr. Member
*
Offline Offline

Activity: 127
Merit: 2


View Profile
January 12, 2020, 09:15:45 PM
 #2017

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
Thanks for advise! Why 5700 nonxt, and why ref.?
Xt's more expensive ,not less chance to memory won't go over (900mhz,5700non xt's 950mhz)refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)no idea nitro,strix and red devil(bu these are expensive already).
So you recommend to buy nonxt 5700 blower? Any manufacter?
Yep in memory hard algo's best pick to buy 5700 blowers.Doesn't matter manufacter, all same.just sticker different Smiley)
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
January 12, 2020, 09:16:43 PM
 #2018

Don't buy vega 56-64 , my vegas don't work even 850mv and consumption too much,(7 vgas 1380W from wall),my best findings are 5700nonxt ref. series.
Thanks for advise! Why 5700 nonxt, and why ref.?
Xt's more expensive ,not less chance to memory won't go over (900mhz,5700non xt's 950mhz)refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)no idea nitro,strix and red devil(bu these are expensive already).
So you recommend to buy nonxt 5700 blower? Any manufacter?
Yep in memory hard algo's best pick to buy 5700 blowers.Doesn't matter manufacter, all same.just sticker different Smiley)
Thanks!
pbfarmer
Member
**
Offline Offline

Activity: 340
Merit: 29


View Profile
January 12, 2020, 11:13:16 PM
Last edit: January 12, 2020, 11:32:00 PM by pbfarmer
 #2019

refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)

Not sure where you’re getting your info on ref vs pulse cooling, but it’s completely opposite to everything I’ve seen.  Pulse has been demonstrated by numerous publications to have a far superior cooling solution vs the ref.

Maybe you’re just lumping it in with the shitty ASUS, msi, etc solutions...  this would be a mistake.

For $10 more than the ref, the cooler, quieter pulse appears to be the better buy.

EDIT: Here's Tech Jesus' take on the matter - the most respected voice on these things afaic:

https://www.gamersnexus.net/hwreviews/3513-sapphire-rx-5700-pulse-review-non-xt-vs-red-dragon
fenomenyaa
Jr. Member
*
Offline Offline

Activity: 127
Merit: 2


View Profile
January 13, 2020, 08:02:08 AM
 #2020

refs memory cooling way much better then others(evoke,pulse,mech,msi gaming tested)

Not sure where you’re getting your info on ref vs pulse cooling, but it’s completely opposite to everything I’ve seen.  Pulse has been demonstrated by numerous publications to have a far superior cooling solution vs the ref.

Maybe you’re just lumping it in with the shitty ASUS, msi, etc solutions...  this would be a mistake.

For $10 more than the ref, the cooler, quieter pulse appears to be the better buy.

EDIT: Here's Tech Jesus' take on the matter - the most respected voice on these things afaic:

https://www.gamersnexus.net/hwreviews/3513-sapphire-rx-5700-pulse-review-non-xt-vs-red-dragon

Due to my own expreience.Took ss, left side pulse 92 mem temp, right side ref 5700 80 mem temp. i have many of them msi mech even worser 96 memory temp.İn pulse 5700 and 5700xt different memory cooler.
Pages: « 1 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 [101] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!