[ANN][SHA]SHACoin2 - Dead Revival - Virtual & Physical Coin - Faucet

[soulistyce]

So I got the new wallet and deleted everything and it keeps stopping and not loading the whole block chains. If you look at the debug log it it always ends with an error when it stops downloading the block chain.


debug log

Code:

received block ac8acf0e2db49197c309
ERROR: CheckProofOfStake() : INFO: check kernel failed on coinstake 8d6dbcefa6f8236d38f8fd1e823ce3d760d9dfbc26b5002cf2b01484a620f3db, hashProof=9755b6847828ec8b829b05a3fe318697a9efeb47372ea4460d38094e1e768801
WARNING: ProcessBlock(): check proof-of-stake failed for block ac8acf0e2db49197c309298bcac04becab26d381e271ef673a8de6a61164a3b5

So I restarted it a few times and got it to download the whole block chain. Then I copy my wallet.dat file into the folder and restarted the wallet and it worked. Some of my coins even came out of stake since they now had over 500 confirms.


It would also help if he corrected the transaction details. Since it says 30 blocks before they can be spent when it is really 500 confirmations for a POF mined block to be spent.

Code:

Status: 498 confirmations
Date: 3/28/2014 17:51
Debit: 0.00 SHA
Net amount: -600.00 SHA
Transaction ID: 9b6f1061f623954b9e0f65c94e5c99ce68b6a966880bb80c81fbf5132a7c7eae

Generated coins must mature 30 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

i did everything like you and lost all my stake coins,
got to recover deleted files, if i delete them i lost all my coins in stake....
what should i do???

type repairwallet in the console and those 'lost' coins will reappear.

whats the command to repair it by console??

[nohow82]

15:44:47

{
"version" : "v1.0.0.0-SHA",
"protocolversion" : 60010,
"walletversion" : 60000,
"balance" : 826466.10285700,
"newmint" : 0.00000000,
"stake" : 300552.65305400,
"blocks" : 15349,
"moneysupply" : 129761257.49318600,
"connections" : 7,
"proxy" : "",
"ip" : "87.8.127.53",
"difficulty" : 11608.87798101,
"testnet" : false,
"keypoololdest" : 1395837589,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"unlocked_until" : 1397104219,
"errors" : ""
}

[Gamer67]

whats the command to repair it by console??

repairwallet

Then restart your wallet.

[raskul]

16614 and it thinks again, it's the current block.
wallet = abortion.

[solosequenosenada]

{
"addr" : "78.8.30.46:25666",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396104742,
"conntime" : 1396101384,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19163,
"banscore" : 0
},
{
"addr" : "75.130.160.109:25666",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396104743,
"conntime" : 1396101384,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19163,
"banscore" : 0
},
{
"addr" : "68.156.145.10:26766",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396105040,
"conntime" : 1396101456,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 19165,
"banscore" : 0
},
{
"addr" : "188.26.172.171:25666",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396104742,
"conntime" : 1396101459,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19165,
"banscore" : 0
},
{
"addr" : "78.8.30.46:53151",
"services" : "00000001",
"lastsend" : 1396104898,
"lastrecv" : 1396104879,
"conntime" : 1396101462,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 19165,
"banscore" : 0
},
{
"addr" : "23.88.228.99:35203",
"services" : "00000001",
"lastsend" : 1396105040,
"lastrecv" : 1396104742,
"conntime" : 1396101587,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 19165,
"banscore" : 0
},
{
"addr" : "125.77.235.32:57121",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396104702,
"conntime" : 1396102011,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 2290,
"banscore" : 0
},
{
"addr" : "81.14.11.98:25666",
"services" : "00000001",
"lastsend" : 1396104877,
"lastrecv" : 1396104743,
"conntime" : 1396102129,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19170,
"banscore" : 0
},
{
"addr" : "116.209.152.35:64184",
"services" : "00000001",
"lastsend" : 1396104742,
"lastrecv" : 1396104622,
"conntime" : 1396102603,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 0,
"banscore" : 0
},
{
"addr" : "54.186.93.231:56730",
"services" : "00000001",
"lastsend" : 1396104879,
"lastrecv" : 1396104742,
"conntime" : 1396102936,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 19171,
"banscore" : 0
},
{
"addr" : "87.105.215.110:25666",
"services" : "00000001",
"lastsend" : 1396105042,
"lastrecv" : 1396104743,
"conntime" : 1396103588,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19173,
"banscore" : 0
},
{
"addr" : "87.8.127.53:52185",
"services" : "00000001",
"lastsend" : 1396104805,
"lastrecv" : 1396105056,
"conntime" : 1396104434,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 0,
"banscore" : 0
},
{
"addr" : "86.155.66.187:50658",
"services" : "00000001",
"lastsend" : 1396104898,
"lastrecv" : 1396104838,
"conntime" : 1396104670,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 16615,
"banscore" : 0
},
{
"addr" : "70.169.117.46:25666",
"services" : "00000001",
"lastsend" : 1396104779,
"lastrecv" : 1396104966,
"conntime" : 1396104778,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 16590,
"banscore" : 0
},
{
"addr" : "188.81.30.56:55266",
"services" : "00000001",
"lastsend" : 1396104849,
"lastrecv" : 1396104906,
"conntime" : 1396104828,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 14613,
"banscore" : 0
},
{
"addr" : "68.228.174.238:25666",
"services" : "00000001",
"lastsend" : 1396105031,
"lastrecv" : 1396105031,
"conntime" : 1396105029,
"version" : 60010,
"subver" : "/SHACoin:1.9.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 19193,
"banscore" : 0
}
]

[TimC]

whats the command to repair it by console??

Click on Help -> Debug Window
Then click on the 'Console' tab.
in the text box type
repairwallet
then press enter

[kiffner]

My wallet is up to date for now

here is what worked for me.

copy wallet.dat somewhere to bacup
delete SHACoin folder -  C:\Users\user\AppData\Roaming\SHACoin
run wallet - SHACoin-qt and let it sync
close wallet - SHACoin-qt
copy your wallet.dat back to C:\Users\user\AppData\Roaming\SHACoin
run SHACoin-qt
go to console
type "repairwallet" and hit enter

[soulistyce]

thanks guys now my wallet its working well with my total coins in it...
is PoS working well also?? can i leave my wallet open and unlock??

[Gamer67]

thanks guys now my wallet its working well with my total coins in it...
is PoS working well also?? can i leave my wallet open and unlock??

Yes

[Cryptokk]

Hi,

I hope this gonna help.

The issue with this coin is the PoS system (for some users) that stuck the blockchain.

If the solutions above not working try this one:
> stop your daemon/qt
> open the .conf file
> add reservebalance=9999999999
> save/close
> remove all the blockchain file (don't remove your wallet.dat and .conf)
> start shacoin

This is stopping the PoS system.

BTW  

I have over 8 offers (buy and sell) on Cryptokk for SHA.
http://www.cryptokk.com/?s=BzeDTxP8APGyTzF2P07XZi
http://www.cryptokk.com/?s=mIJ6C6KKDZYpWjmJDgT48TM7t9sz

[Gamer67]

Mined blocks are clearing 500 confirms for me now and being credited to my balance.


These are blocks that I mined yesterday evening.

[Biomech]

people are just impatient. it takes 48 hours for your coins not to move from your wallet,  to go into stake. after that, the stake generated is way less than most people will think. also, with 500 confirmations from mined coins, it takes over 12 hours for my mined coins to confirm, however, they all seem to be accepted by the network and working on being confirmed. so their is a bit of a learning curve, but i dont think its broken.

my coins sat for significantly over 48 hours without staking. others had no problems. Just out of sheer morbid curiousity, I'm installing a new instance of SHA with the .conf file and nothing else. We'll see if it bothers to sync. I took the smart choice and sold out, and I'm glad I did. Y'all are off on different chains, the wallet syncs for one guy and not the other, stakes for one guy, but not the other, the dev is GONE...

Aside from wasting a lot of time, what is the purpose of this coin? It's problems have gotten it taken off the exchanges, only an elite few get stake, it won't sync or stay synced.. Hell, I could do a copy/paste coin that made more sense.

My only consolation is somebody bought me out, for about what I lost in BTC mining time.

What a train wreck.

[raskul]

Hell, I could do a copy/paste coin that made more sense.

can we have another POS coin please?

/s

[nohow82]

Hi,

I hope this gonna help.

The issue with this coin is the PoS system (for some users) that stuck the blockchain.

If the solutions above not working try this one:
> stop your daemon/qt
> open the .conf file
> add reservebalance=9999999999
> save/close
> remove all the blockchain file (don't remove your wallet.dat and .conf)
> start shacoin

This is stopping the PoS system.

BTW  

I have over 8 offers (buy and sell) on Cryptokk for SHA.
http://www.cryptokk.com/?s=BzeDTxP8APGyTzF2P07XZi
http://www.cryptokk.com/?s=mIJ6C6KKDZYpWjmJDgT48TM7t9sz

GREAT! thanks

[sacskate]

There was a fork on the 26th, and an updated wallet released. The dev has gone quiet, which sucks. The only real problem is that for some reason there seems to be some lag in the network. I think it is because people are adding nodes that are not running the updated client. I've tried to tell you guys not to add any nodes, but people keep doing it. If your wallet gets stuck on a block just close the wallet and reopen it. If your not seeing stake you either didnt update correctly, are not unlocked or simply didnt get stake.

Edit: If you read the last few pages instead of just posting your problems, you would probably find your fix.

[Jamestty]

Is everyone doing OK now. It seems were just dealing with this one guys problem right now.

the coin is working, the network is working, their seem to be some small bugs, but i can send coins back and forth from multiple wallets with no prob, super fast

[nohow82]

Hi,

I hope this gonna help.

The issue with this coin is the PoS system (for some users) that stuck the blockchain.

If the solutions above not working try this one:
> stop your daemon/qt
> open the .conf file
> add reservebalance=9999999999
> save/close
> remove all the blockchain file (don't remove your wallet.dat and .conf)
> start shacoin

This is stopping the PoS system.

BTW  

I have over 8 offers (buy and sell) on Cryptokk for SHA.
http://www.cryptokk.com/?s=BzeDTxP8APGyTzF2P07XZi
http://www.cryptokk.com/?s=mIJ6C6KKDZYpWjmJDgT48TM7t9sz

ok now my wallet is sync but i can make some POS???

[Biomech]

There was a fork on the 26th, and an updated wallet released. The dev has gone quiet, which sucks. The only real problem is that for some reason there seems to be some lag in the network. I think it is because people are adding nodes that are not running the updated client. I've tried to tell you guys not to add any nodes, but people keep doing it. If your wallet gets stuck on a block just close the wallet and reopen it. If your not seeing stake you either didnt update correctly, are not unlocked or simply didnt get stake.

Edit: If you read the last few pages instead of just posting your problems, you would probably find your fix.

Gettin' real fucking sick of this. I have tried EVERY THING that people have posted, read every post, talked to people on Skype. The above is pure bullshit. This coin is broken.

I mine alts, and I trade them. I have installed over 75 wallets in the last few months, and THIS is the only one that just plain refuses to work. I currently have seven wallets running on my system, none of which are giving me trouble, and two of them are coins launched within the last week.

[raskul]

[loganj]

There was a fork on the 26th, and an updated wallet released. The dev has gone quiet, which sucks. The only real problem is that for some reason there seems to be some lag in the network. I think it is because people are adding nodes that are not running the updated client. I've tried to tell you guys not to add any nodes, but people keep doing it. If your wallet gets stuck on a block just close the wallet and reopen it. If your not seeing stake you either didnt update correctly, are not unlocked or simply didnt get stake.

Edit: If you read the last few pages instead of just posting your problems, you would probably find your fix.

Gettin' real fucking sick of this. I have tried EVERY THING that people have posted, read every post, talked to people on Skype. The above is pure bullshit. This coin is broken.

I mine alts, and I trade them. I have installed over 75 wallets in the last few months, and THIS is the only one that just plain refuses to work. I currently have seven wallets running on my system, none of which are giving me trouble, and two of them are coins launched within the last week.

You didn't even know what pos was when mining this coin. How can we expect you to run the wallet.  You said you sold out now go away you're not helping.