[ANN] LeaseRig.net Rent & Hire Scrypt(Jane/Nfactor)/SHA3/SHA256/X11 HashPower!

[miaviator]

I see some long term lease testing going on

Thu May 22 21:19:13 UTC 2014   0.00000000   590   0.00000000   Unicorn04 (SHA256 196.00 GH/s)
Thu May 22 21:18:09 UTC 2014   0.00000000   599   0.00000000   Unicorn04 (SHA256 196.00 GH/s)
Thu May 22 21:16:39 UTC 2014   0.00000000   585   0.00000000   Unicorn04 (SHA256 196.00 GH/s)

LOL.  Yes, and more than just a little bit.  (Somebody was trying to figure out the current maximum lease time in hours.)

We're up to somewhere between 550-600 hours without miaviator blowing his fuse!  

Long term leases will be available VERY soon.  

Is a few hundred million years overkill?

[kalus]

"Your LRP ID will be lost!  Are you sure?"

if i switch from LRP to direct, what does this reset, and is it irreversible? 

[ebliever]

"Your LRP ID will be lost!  Are you sure?"

if i switch from LRP to direct, what does this reset, and is it irreversible? 

You can switch back, but you will get a new LRP ID number in the Configuration tab, and you'll need to replace the old one in your settings with the new one.

[fonky]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

[byt411]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

[fonky]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same 

[xmk3]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

[Blaater]

When you select on highest speed it does not list correctly.

Since when is 2 > 180?



Also second problem, when you have it listed on speed, you cannot click on the Rig name and open the comments. (Using Chrome).

[miaviator]

When you select on highest speed it does not list correctly.

Since when is 2 > 180?

http://www.usbminers.nl/Images/1.jpg

Also second problem, when you have it listed on speed, you cannot click on the Rig name and open the comments. (Using Chrome).

ROFL.  Since you are using an unannounced feature which we put into the build to test and find out what else needed to be done.  X-Rob on IRC actually donated code to fix this issue.  In the next build we may still not announce sorting.  We will however have sorting enabled and working for Rated Speed, Current Speed and Feedback.  It's all working on dev at the moment.

Even funnier.  Sorting by speed and clicking on rigs sticks the descriptions all lined up at the top that's too funny. 

[miaviator]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

[byt411]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

There most likely will be problems with IE, since it's the crappiest browser, and it actually somehow lags and does not send queries to the website when you press a button.

[miaviator]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

There most likely will be problems with IE, since it's the crappiest browser, and it actually somehow lags and does not send queries to the website when you press a button.

Is it bad if my opinion is that IE users should be banished from the internet altogether?

[byt411]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

There most likely will be problems with IE, since it's the crappiest browser, and it actually somehow lags and does not send queries to the website when you press a button.

Is it bad if my opinion is that IE users should be banished from the internet altogether?

I think that's an awesome idea. Microsoft also should discontinue IE, and implement Google Chrome.
Can't you just display a big red notice saying "PLEASE DO NOT USE INTERNET EXPLORER, IT IS CRAPPY. DOWNLOAD GOOGLE CHROME HERE." if customers are using ie? lol.
That would be awesome!

[miaviator]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

There most likely will be problems with IE, since it's the crappiest browser, and it actually somehow lags and does not send queries to the website when you press a button.

Is it bad if my opinion is that IE users should be banished from the internet altogether?

I think that's an awesome idea. Microsoft also should discontinue IE, and implement Google Chrome.
Can't you just display a big red notice saying "PLEASE DO NOT USE INTERNET EXPLORER, IT IS CRAPPY. DOWNLOAD GOOGLE CHROME HERE." if customers are using ie? lol.
That would be awesome!

I would.  But then, this is one of the reasons I'm not allowed to deploy production websites

[byt411]

i click on the hire button but nothing happens  
i have funds on the site.
i put the pool information but the hire button doesn't work. I don't understand why  

That's probably because you are using Internet Explorer.

nope.
I've tried firefox, chrome, safari, opera - > the same  

That's definitely strange.  Rigs are still getting hired.  Which rig was it that had that issue?

And is there an issue with hiring rigs in IE? 

Yes, is there an issue hiring rigs in IE?   I don't think we have a dev using IE (or windows for that matter) mostly because even multiple world governments have advised against using IE for any reason whatsoever.

There most likely will be problems with IE, since it's the crappiest browser, and it actually somehow lags and does not send queries to the website when you press a button.

Is it bad if my opinion is that IE users should be banished from the internet altogether?

I think that's an awesome idea. Microsoft also should discontinue IE, and implement Google Chrome.
Can't you just display a big red notice saying "PLEASE DO NOT USE INTERNET EXPLORER, IT IS CRAPPY. DOWNLOAD GOOGLE CHROME HERE." if customers are using ie? lol.
That would be awesome!

I would.  But then, this is one of the reasons I'm not allowed to deploy production websites

Meh, it's not good for us providers anyway.
So, miaviator, what do you think about my cancellation proposal?

[miaviator]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

[helipotte]

Is anyone else having trouble with Eligius and disconnects using LRP?  I have been having a time with this.  I am now using another pool and all is working great.

Eligius and P2Pool just won't work with LRP. There appears to be some hard-coded buffer size in LRP that drops the end off the work requests, which is why it works for a bit (at the start of a block) and then suddenly starts failing.

I've had a ticket open about this since before it was sold.  That's why I don't use LRP any more for AusMiner.

Just the answer I was looking for. Thanks.  I guess my Ants aren't rentable until this is patched.

Is this issue ever going to be patched?

Thanks.

[byt411]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

That's not what I meant, I meant that you could make it like that, so that you guys get the fee either way.

Also, XMK3, is there any plans for support for the zenController?

[miaviator]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

That's not what I meant, I meant that you could make it like that, so that you guys get the fee either way.

Also, XMK3, is there any plans for support for the zenController?

We support the PI.  What's the issue.

[byt411]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

That's not what I meant, I meant that you could make it like that, so that you guys get the fee either way.

Also, XMK3, is there any plans for support for the zenController?

We support the PI.  What's the issue.

I mean, the zenController has a function which is remote control. Would there be any chance for Leaserig to develop something for that?