[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[JRDavis]

I have been running the Beta code for about four hours on a GTX 970 without incident.

Will now bring it up on a GTX 980 ti system for testing.

[1714863766]

1714863766

[1714863766]

1714863766

[1714863766]

1714863766

[1714863766]

1714863766

[JRDavis]

Beta code will not launch if you click on the run.bat and specify 'run as administrator'. Runs fine as guest.

The code shows that the 980 ti is producing almost exactly the same hashrate as does the 970. All other coins show that the 980 ti produces almost twice the hashrate as does the 970. (BTW, this is true of 1.5 as well when running ethereum mining.)

[JRDavis]

Beta code appears substantially less efficient than NHM 1.5.

That is, the benchmarks recorded for Ethereum on the 970 was 4.886 MHs and 5.135 MHs on the 980 ti, however the running beta on the 970 shows hashrates of from 4.02 MHs to 4.441 MHs while the running 980 ti ranges between 4.06 MHs and 4.24 MHs.

[NiceHashSupport]

Beta code appears substantially less efficient than NHM 1.5.

That is, the benchmarks recorded for Ethereum on the 970 was 4.886 MHs and 5.135 MHs on the 980 ti, however the running beta on the 970 shows hashrates of from 4.02 MHs to 4.441 MHs while the running 980 ti ranges between 4.06 MHs and 4.24 MHs.

You should be getting ~18 mhs with 970 on ethereum.

[JRDavis]

I've reported exactly what I'm getting on my systems. Both running Windows 10 (which I understand could be a problem for Ethereum mining ... something to do with their DirectX implimentation). Both are on Intel i7 Core processors with 16 Gig of RAM on the 970 system and 32 Gig on the 980 ti system. Nothing else is running on either system during Beta test.

These are both EVGA GetForce GPUs.

[JRDavis]

Beta testing is now terminated. I will rebuild the 970 system using Windows 7 and try the beta again later.

[nicehash]

Here is a list of currently supported ETHEREUM target-pools for placing NiceHash hashing power purchase orders:

HITCHPOOL:
Stratum hostname: eu1.hitchpool.org or us1.hitchpool.org
Stratum port: 3334
Username: HITCHPOOL-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

COINOTRON:
Stratum hostname: coinotron.com
Stratum port: 3344
Username: COINOTRON-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

MININGPOOLHUB:
Stratum hostname: hub.miningpoolhub.com
Stratum port: 20534
Username: MININGPOOLHUB-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

This now concludes our first three Ethereum pools bounty, however all other pools are of course very much welcome to add support for NiceHash.

If you are a SELLER/PROVIDER on NiceHash: do not forget that until Genoil adds support for NiceHash in his fork, you would have to use our Genoil ethminer improved fork.

Thanks and keep on hashing!


Best regards,
NiceHash team.

[jcoin]

I can't get the nicehash/cpp-ethereum fork to compile on Ubuntu 14.04. Genoil/cpp-ethereum compiles just fine.

here's the error, any help please?

Code:

[ 97%] Built target ethcore
/cpp-ethereum/libstratum/EthStratumClient.cpp: In member function âvoid EthStratumClient::processReponse(Json::Value&)â:
/cpp-ethereum/libstratum/EthStratumClient.cpp:299:75: error: no matching function for call to âEthStratumClient::processExtranonce(std::string)â
    processExtranonce(params.get((Json::Value::ArrayIndex)1, "").asString());
                                                                           ^
/cpp-ethereum/libstratum/EthStratumClient.cpp:299:75: note: candidate is:
/cpp-ethereum/libstratum/EthStratumClient.cpp:271:6: note: void EthStratumClient::processExtranonce(std::string&)
 void EthStratumClient::processExtranonce(string& enonce)
      ^
/cpp-ethereum/libstratum/EthStratumClient.cpp:271:6: note:   no known conversion for argument 1 from âstd::string {aka std::basic_string<char>}â to âstd::string& {aka std::basic_string<char>&}â
/cpp-ethereum/libstratum/EthStratumClient.cpp:421:76: error: no matching function for call to âEthStratumClient::processExtranonce(std::string)â
     processExtranonce(params.get((Json::Value::ArrayIndex)0, "").asString());
                                                                            ^
/cpp-ethereum/libstratum/EthStratumClient.cpp:421:76: note: candidate is:
/cpp-ethereum/libstratum/EthStratumClient.cpp:271:6: note: void EthStratumClient::processExtranonce(std::string&)
 void EthStratumClient::processExtranonce(string& enonce)
      ^
/cpp-ethereum/libstratum/EthStratumClient.cpp:271:6: note:   no known conversion for argument 1 from âstd::string {aka std::basic_string<char>}â to âstd::string& {aka std::basic_string<char>&}â
make[2]: *** [libstratum/CMakeFiles/ethstratum.dir/EthStratumClient.cpp.o] Error 1
make[2]: Leaving directory `/cpp-ethereum/build'
make[1]: *** [libstratum/CMakeFiles/ethstratum.dir/all] Error 2
make[1]: Leaving directory `/cpp-ethereum/build'
make: *** [all] Error 2

[ryen123]

Tried building on ubuntu 14.04. Can't compile it (commit 1fb1e0b). I can compile genoil's version no prob.

Code:

Linking CXX shared library libdevcore.so
[ 48%] Built target devcore
Scanning dependencies of target ethash
[ 51%] Building C object libethash/CMakeFiles/ethash.dir/io.c.o
[ 53%] Building C object libethash/CMakeFiles/ethash.dir/internal.c.o
[ 56%] Building C object libethash/CMakeFiles/ethash.dir/io_posix.c.o
[ 58%] Building CXX object libethash/CMakeFiles/ethash.dir/sha3_cryptopp.cpp.o
Linking CXX shared library libethash.so
[ 58%] Built target ethash
[ 60%] Generating OpenCL Kernel Byte Array
Scanning dependencies of target ethash-cl
[ 63%] Building CXX object libethash-cl/CMakeFiles/ethash-cl.dir/ethash_cl_miner.cpp.o
Linking CXX shared library libethash-cl.so
[ 63%] Built target ethash-cl
[ 65%] Building NVCC (Device) object libethash-cuda/CMakeFiles/ethash-cuda.dir/ethash-cuda_generated_ethash_cuda_miner_kernel.cu.o
cc1: warning: command line option ‘-std=c++11’ is valid for C++/ObjC++ but not for C [enabled by default]
cc1: warning: command line option ‘-std=c++11’ is valid for C++/ObjC++ but not for C [enabled by default]
ptxas info    : 0 bytes gmem, 248 bytes cmem[3]
ptxas info    : Compiling entry function '_Z13ethash_searchPVjm' for 'sm_52'
ptxas info    : Function properties for _Z13ethash_searchPVjm
    0 bytes stack frame, 0 bytes spill stores, 0 bytes spill loads
ptxas info    : Used 72 registers, 336 bytes cmem[0]
Scanning dependencies of target ethash-cuda
[ 68%] Building CXX object libethash-cuda/CMakeFiles/ethash-cuda.dir/ethash_cuda_miner.cpp.o
Linking CXX static library libethash-cuda.a
[ 68%] Built target ethash-cuda
Scanning dependencies of target ethstratum
[ 70%] Building CXX object libstratum/CMakeFiles/ethstratum.dir/EthStratumClient.cpp.o
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp: In member function ‘void EthStratumClient::processReponse(Json::Value&)’:
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:299:75: error: no matching function for call to ‘EthStratumClient::processExtranonce(std::string)’
    processExtranonce(params.get((Json::Value::ArrayIndex)1, "").asString());
                                                                           ^
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:299:75: note: candidate is:
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:271:6: note: void EthStratumClient::processExtranonce(std::string&)
 void EthStratumClient::processExtranonce(string& enonce)
      ^
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:271:6: note:   no known conversion for argument 1 from ‘std::string {aka std::basic_string<char>}’ to ‘std::string& {aka std::basic_string<char>&}’
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:421:76: error: no matching function for call to ‘EthStratumClient::processExtranonce(std::string)’
     processExtranonce(params.get((Json::Value::ArrayIndex)0, "").asString());
                                                                            ^
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:421:76: note: candidate is:
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:271:6: note: void EthStratumClient::processExtranonce(std::string&)
 void EthStratumClient::processExtranonce(string& enonce)
      ^
/home/ronnie/ethminer-nicehash/libstratum/EthStratumClient.cpp:271:6: note:   no known conversion for argument 1 from ‘std::string {aka std::basic_string<char>}’ to ‘std::string& {aka std::basic_string<char>&}’
make[2]: *** [libstratum/CMakeFiles/ethstratum.dir/EthStratumClient.cpp.o] Error 1
make[1]: *** [libstratum/CMakeFiles/ethstratum.dir/all] Error 2
make: *** [all] Error 2

[nicehash]

Dear users,

Dagger-Hashimoto is now fully supported and NiceHash Miner 1.5.1.0 released with 100% Lyra2REv2 speedup on NVIDIA: https://www.nicehash.com/?p=news&id=80

Keep on hashing!

Best regards,
NiceHash team.

[usao]

Is there a Etherium Linux CPU miner for use with Nicehash pool?

[philipma1957]

your system won't work with hitch pool at the moment.

and this will cost me if hitchpool hits  a block.



my free testing is over.

when it is fixed shoot me a pm.

I wasted close to .05btc

you are not picking up any of my contracts  so if hitch pool hits a block I get zip.

this makes the .05 btc I spent wasted. unless I point a real miner to them.

get your shit together bro.

[JarBinks]

Here is a list of currently supported ETHEREUM target-pools for placing NiceHash hashing power purchase orders:

HITCHPOOL:
Stratum hostname: eu1.hitchpool.org or us1.hitchpool.org
Stratum port: 3334
Username: HITCHPOOL-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

COINOTRON:
Stratum hostname: coinotron.com
Stratum port: 3344
Username: COINOTRON-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

MININGPOOLHUB:
Stratum hostname: hub.miningpoolhub.com
Stratum port: 20534
Username: MININGPOOLHUB-USERNAME.WORKER-NAME
Password: WORKER-PASSWORD

This now concludes our first three Ethereum pools bounty, however all other pools are of course very much welcome to add support for NiceHash.

If you are a SELLER/PROVIDER on NiceHash: do not forget that until Genoil adds support for NiceHash in his fork, you would have to use our Genoil ethminer improved fork.

Thanks and keep on hashing!


Best regards,
NiceHash team.

I am working against MININGPOOLHUB, thanks!

[Dualshock]

Dear users,

Dagger-Hashimoto is now fully supported and NiceHash Miner 1.5.1.0 released with 100% Lyra2REv2 speedup on NVIDIA: https://www.nicehash.com/?p=news&id=80

Keep on hashing!

Best regards,
NiceHash team.

Thankyou man !
All my rigs work fine and mining Dagger-Hashimoto.

7970, 7950, 270x, 280x.

[ryen123]

Anyone managed to compile the nicehash-ethminer on ubuntu 14.04?

[philipma1957]

Seem to be  working again.

Also more hash is available.


I am testing renting and pointing it to  hitchpool.org


I have 3 orders pointed to hitchpool from nice hash



I have 1 miner from my house mining at hitchpool

  note you must do this for at an hour.  hitchpool needs your miners ip to set withdrawals.

I set a low withdrawal level 0.4 eth this will cost a fee of 0.0005 eth  once it works for that level I will boost to 1.00 eth which is fee free.

When I test rented at hitchpool last night I was dropped and my nicehash rentals froze I had six rentals pointed to hitch pool so maybe that is what froze and lock me out.

[jcoin]

Anyone managed to compile the nicehash-ethminer on ubuntu 14.04?

NiceHash, please look into this

[usao]

While im here in this thread, I have the nicehash miner installed,running, but it only works on my cpu and doesn't work on the GPU.
I have Raedon 5450, which is not powerful, but could add something to my effort if I could get it to work.
Are there any tricks/tips on how to get the nicehash miner to work with GPUs?

[philipma1957]

While im here in this thread, I have the nicehash miner installed,running, but it only works on my cpu and doesn't work on the GPU.
I have Raedon 5450, which is not powerful, but could add something to my effort if I could get it to work.
Are there any tricks/tips on how to get the nicehash miner to work with GPUs?

how much ram does that card have?

I think 2gb can work  with proper setup

[usao]

Ratz, I think it's a 1Gb card...