[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[Dualshock]

@Nicehash: please add some info to Stat page, with info about currently paying and 24h paying.

Example:
https://ttwjbq.dm2302.livefilestore.com/y3pvTkqET6y5JJVfKDJ61TqioVS9adD02fL0o8O0QE0_MrYAd17dwDfXEGRtxdMkPgMHuL1Od38_70YLNZxmaXo_Brj_HLEh5L29A_ihpFTsrTJ47JpXbx3jLJ3ZcegeadZReUKPWLzct-E8k7QDXsEpQ/nichashSTAT.png


Thankyou !

[usao]

Is there a tool/utility where I can enter my hashrate for the various algos and it will tell me which is paying the best for my specific hashrate (all on one page, so I can compare them)?

[nemgun]

i have more than 0.00100000 ETH but i never recieved them !

[_nur]

i have more than 0.00100000 ETH but i never recieved them !

maybe unconfirmed?

[ATCkit]

Is there a tool/utility where I can enter my hashrate for the various algos and it will tell me which is paying the best for my specific hashrate (all on one page, so I can compare them)?

Hi usao, Long time no see.

Here's what I use:

http://www.coinwarz.com/cryptocurrency

https://www.whattomine.com/asic

https://www.whattomine.com/coins

[usao]

Is there a tool/utility where I can enter my hashrate for the various algos and it will tell me which is paying the best for my specific hashrate (all on one page, so I can compare them)?

Hi usao, Long time no see.

Here's what I use:

http://www.coinwarz.com/cryptocurrency

https://www.whattomine.com/asic

https://www.whattomine.com/coins

Thanks, appreciate it.
I got hold of a bunch of cpu power, and trying to figure out what to do with it.
It's all paid for the entire year.

[ATCkit]

Is there a tool/utility where I can enter my hashrate for the various algos and it will tell me which is paying the best for my specific hashrate (all on one page, so I can compare them)?

Hi usao, Long time no see.

Here's what I use:

http://www.coinwarz.com/cryptocurrency

https://www.whattomine.com/asic

https://www.whattomine.com/coins

Thanks, appreciate it.
I got hold of a bunch of cpu power, and trying to figure out what to do with it.
It's all paid for the entire year.

Nice. There's a few coins that only use cpus. If my old grey cells are working well,  Bytecoin (BCN) might be one of them.

EDIT:

Here's a good resource on cpu mining:

https://bitcointalk.org/index.php?topic=439874.140

looks like Hodl coin is worth looking at. You might even decide to rent out your cpus for HODL on NH.

EDIT2: http://cpucoinlist.com/

[golden0707]

Hello everybody!
Plz,help me with this issue :
Im mining Lyra2reV2 2*R9 270X, 2* R9 280X,1* 7970 , 8 Gb RAM, W7 Prof
Then Im using sgminer-5.1.0-optimized  Im getting around 8 Mhs on 270X and 13-14 Mhz on 280x. But sgminer.exe freezes . Can work 20 minuests , can 2 hours , but freezes anyway. And its responding but stuck on waiting for available work from pool , timer on sgminer.exe stoped.

Then Im using sgminer-5.4.0 –twicked Im getting 4 Mhz on 270x and 8 Mhz on 280x. But mining is stable.

There to look at ?

Config :

"pools" : [
{
"name" : "NiceHash_Lyra2REv2_Fixed",
"url" : "stratum+tcp://lyra2rev2.usa.nicehash.com:3347",
"user" : "XXXXXXXXXXXXXXXXXX",
"pass" : "d=10.0",
"algorithm" : "Lyra2REv2",
"nfactor" : "10",
"xintensity" : "256",
"worksize" : "64"
}
],
"keccak-unroll" : "0",
"gpu-powertune" : "10",
"failover-only": true,
"worksize" : "64",
"devices": "all",
"gpu-fan": "0-90",
"temp-cutoff": "85",
"temp-overheat": "80",
"temp-target": "71",
"gpu-threads" : "1",
"lookup-gap" : "2",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-memdiff": "0",
"shares": "0",
"kernel-path": "/usr/local/bin",
"auto-fan": true,
"expiry": "28",
"failover-switch-delay": "10",
"gpu-dyninterval": "7",
"gpu-platform": "-1",
"hamsi-expand-big": "4",
"log": "5",
"queue": "0",
"scan-time": "7",
"tcp-keepalive": "30",
"temp-hysteresis": "3"
}

Thanks for any idea.

[nicehash]

Hello everybody!
Plz,help me with this issue :
Im mining Lyra2reV2 2*R9 270X, 2* R9 280X,1* 7970 , 8 Gb RAM, W7 Prof
Then Im using sgminer-5.1.0-optimized  Im getting around 8 Mhs on 270X and 13-14 Mhz on 280x. But sgminer.exe freezes . Can work 20 minuests , can 2 hours , but freezes anyway. And its responding but stuck on waiting for available work from pool , timer on sgminer.exe stoped.

Then Im using sgminer-5.4.0–tweaked Im getting 4 Mhz on 270x and 8 Mhz on 280x. But mining is stable.

sgminer-5.4.0–tweaked is less optimized than sgminer-5.1.0-optimized, hence also more stable. We suggest you to use NiceHash Miner - it automatically detects if sgminer crashes and restarts automatically.


Best regards,
NiceHash team.

[golden0707]

Hello everybody!
Plz,help me with this issue :
Im mining Lyra2reV2 2*R9 270X, 2* R9 280X,1* 7970 , 8 Gb RAM, W7 Prof
Then Im using sgminer-5.1.0-optimized  Im getting around 8 Mhs on 270X and 13-14 Mhz on 280x. But sgminer.exe freezes . Can work 20 minuests , can 2 hours , but freezes anyway. And its responding but stuck on waiting for available work from pool , timer on sgminer.exe stoped.

Then Im using sgminer-5.4.0–tweaked Im getting 4 Mhz on 270x and 8 Mhz on 280x. But mining is stable.

sgminer-5.4.0–tweaked is less optimized than sgminer-5.1.0-optimized, hence also more stable. We suggest you to use NiceHash Miner - it automatically detects if sgminer crashes and restarts automatically.


Best regards,
NiceHash team.

Thanks  for the advise , Ill give it a try.

[nemgun]

All confirmed and unexchanged balance since some weeks now

https://www.nicehash.com/?p=miners&addr=1F1KqKfC3nnyjGneuJXShWwEADwC8yrV3z

[pomelo]

When is my unexchanged Eth gonna be exchanged and paid? I've been waiting for ages. Please give me my coins!
 

[SimonTower]

When is my unexchanged Eth gonna be exchanged and paid? I've been waiting for ages. Please give me my coins!
 

Yepp, lots of us stucked.
https://www.nicehash.com/?p=miners&addr=1Dj2hLYMF8vSgBFUYYLQFro99nLmvFt6FT&a=3&l=0

[golden0707]

Im sorry , ,maybe a stupid question.

There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?

If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear.  Tried to put it in config.json , same result.

What am I doing wrong ?

P.S. Log file
Restarting miner..
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] Starting miner:  --opencl --opencl-platform 0 --erase-dags old  --temp-target  71 -S daggerhashimoto.eu.nicehash.com:3353 -O 1HTgxSxA72oXp7wst4QvK8fwCoqqUkWfyF.worker1:x --dag-dir data\AMD_OpenCL --report-port 4050 --opencl-devices 0 1 2 3 4
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] NumRetries: 23
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] Shutting down miner


P.S. And plz tell me what is avarage speed mining daggerhashimoto on:
270x -?
280x -?

[JRDavis]

NHM 1.5.1 stops working (no error message except that it has stopped working) about once every two days. This is true on two different systems.

[theLosers106]

NHM 1.5.1 stops working (no error message except that it has stopped working) about once every two days. This is true on two different systems.

Send your log file to nhm@nicehash.com when it happens so that it is easier to see what is happening.

Thanks,
theLosers106.

[theLosers106]

Dear users,

Introduction of new algorithms and release of NiceHash Miner v1.5.0.0 (new algos Hodl, Decred, Dagger-Hashimoto, speedups and more): https://www.nicehash.com/index.jsp?p=news&id=77

Keep on hashing!

Best regards,
NiceHash team.

"Keep on hashing!"...!!!???

Maybe I'll do, but only after you straighten your brains and tell me in a whisper "secret" reason for cunning behavior of your software.

json file:

  "DisableAMDTempControl": true,
   ...
      "Algorithms": [
        {
          "Name": "x11",
          "ExtraLaunchParameters": "--keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 640 --thread-concurrency    0 --
worksize  64 --gpu-threads 1  --gpu-engine 800-1030,900-1040,900-1040,950-1080 --gpu-memclock 1250,1300,1300,1500 --auto-fan --auto-gpu --gpu-fan 80-90,53-68,53-68,47-62 --temp-cutoff 78,78,78,77 --temp-overheat 74,74,74,74 --temp-target 70,70,70,68 ",

from log file:

[2016-06-08 20:21:49] [INFO] [AMD_OpenCL] Starting miner:  --gpu-platform 0 -k x11 --url=stratum+tcp://x11.eu.nicehash.com:3336 --
userpass=1Jgw5D3L1ALJXMxWF9mBnf3TvEFMTWBJk3.worker2:x --api-listen --api-port=4050  --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 1024 --thread-concurrency 0 --worksize 64 --gpu-threads 1 --device 0,1,2,3

Here you can see that xintensity not 640, but 1024. Temperature control settings and fans are not included in the string to start. HOW SO ??.
For whom you are preparing such surprises.

Im sorry , ,maybe a stupid question.

There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?

If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear.  Tried to put it in config.json , same result.

What am I doing wrong ?

P.S. Log file
Restarting miner..
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] Starting miner:  --opencl --opencl-platform 0 --erase-dags old  --temp-target  71 -S daggerhashimoto.eu.nicehash.com:3353 -O 1HTgxSxA72oXp7wst4QvK8fwCoqqUkWfyF.worker1:x --dag-dir data\AMD_OpenCL --report-port 4050 --opencl-devices 0 1 2 3 4
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] NumRetries: 23
[2016-06-15 09:20:21] [INFO] [AMD_OpenCL] Shutting down miner


P.S. And plz tell me what is avarage speed mining daggerhashimoto on:
270x -?
280x -?

This is a known bug and will be fixed in the next version. Thanks for spotting it.

theLosers106.

[golden0707]

Im sorry , ,maybe a stupid question.

There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?

If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear.  Tried to put it in config.json , same result.

This is a known bug and will be fixed in the next version. Thanks for spotting it.

theLosers106.

Ok , Thanks for info. Will be waiting.

[A.L.F.]

Im sorry , ,maybe a stupid question.

There do i have to put --temp-target --gpu-fan and so on parameters in NiceHash Miner ?

If i put it in settings -> AMD_OpenCL tab in ExtraLaunch Parameters , like --temp-target 71 --gpu-fan 30-90 --temp-cutoff 85
miner doesnt start , window flashes and disappear.  Tried to put it in config.json , same result.

This is a known bug and will be fixed in the next version. Thanks for spotting it.

theLosers106.

Ok , Thanks for info. Will be waiting.

This is no bug. Ethminer does not support temperature and fans control flags, and never had not been support ( only supports sgminer)

[nemgun]

Could we have an answer regarding our ether payment problem ? Else i will report you as scam.