New Official AMT Thread

[AMT_miners]

AMT,

Simple question for you, where is my second order?

On the way.

[1714882861]

1714882861

[rik_khaos]

simple question, where is my power supply?

[rik_khaos]

Dear AMT moderator, may I please get your name and the name of your position within the company?

[AMT_miners]

simple question, where is my power supply?

Your miner came without a power supply? We will check that up and reach you back as soon as possible.

[rik_khaos]

simple question, where is my power supply?

Your miner came without a power supply? We will check that up and reach you back as soon as possible.

Super Neat-o! Thanks a lot Mister or Mam.

[AMT_miners]

I wanted a refund. Please do not send me any machines. I want my $12k back!!!!

Thank you for your notice. We will put you in the refund list.

[AMT_miners]

Well I know you've seen my request for refund as you've deleted another post of mine addressing it.

I want a full refund!!

$12,158.00

That's Twelve Thousand One Hundred Fifty Eight dollars and Zero cents.

I repeat: please do NOT send me any machines. What I ordered as promised was not delivered please provide me with a full refund.

Thank you.

Thank you for the notice. You are already in the refund list. Please, rest assured that there is no need of further posts addressing that.

[AMT_miners]

I want a refund also.  Order 1356

Thanks for the notice. We will put you in the refund list. Should you have any questions, please feel free to PM us and we will reach you back as soon as possible.

[rik_khaos]

Are we no longer allowed to post on this thread?

[AMT_miners]

Are we no longer allowed to post on this thread?

We are doing our best to respond to all incoming inquires, process orders and ship them in a really short amount of time so all of our customers receive their miners right away. We saw your message, please give us some to time to get to it, so we can respond you back with a solution. Thank you.

[NotFuzzyWarm]

4. We're American and proud to build our miners in America and not China.

There are a few decent companies in America, and a few decent companies in Europe that actually sell, build and ship miners, but most foreign companies are  complete scams.

You have your products build in China now, and why is that?

Because sad to say - the American companies they worked with here blew it big time. 

[avaughan4]

AMT,

Simple question for you, where is my second order?

On the way.

My order has been "On the way" since 7/29, that is according to your email below. Can you elaborate rather than being dismissive?

On 7/29/2014 1:35 AM, AMT Orders wrote:
> Arturo,
>
> Your other miner shipped already, there's really not much else we can do at this point.... (truncated for brevity)
>
> Best
> AMT

[sabre]

AMT,
     With my 4 cards working I'm getting a lower than expected hash rate. Can you let me know what to do to troubleshoot why the cards are working at a lower speed? I'm only getting an average of 730 GH. The 5th card is not attached right now since it doesn't work.

     Let me know,

Thanks in Advance.

Just a quick idea before we get a technical answer on this. Get your brother to copy the card from his miner flash an sd card with the copied image. You can use win image 32 for making the copy.

AMT,
     I got my brothers card and tried it on my machine this morning. The top card is still dead and the hashing on "one" of the other cards looked better this morning. However I did notice that on the card that seems like its not hashing fully, the heat sink is not properly placed on the card (its lifted up from one side). So it may be that the heat on the chips on that card are overheating which causes the card to not fully hash.

     Let me know if and how I should return the top card as its not turning on at all. I will let you know what the other cards hash rate it later on when I get back home.

Thanks in Advance.

AMT,
     So to summarize here are my current machine's standing...

1.   Top card is completely dead - Never worked
2.   Second card is only partially hashing - Never fully hashed. This is the card that its heat sink doesn't look like its fully seated from one side.

      Let me know what I should do to further troubleshoot or if I should return the cards or unit?

Thanks in Advance.

[AMT_miners]

AMT,
     With my 4 cards working I'm getting a lower than expected hash rate. Can you let me know what to do to troubleshoot why the cards are working at a lower speed? I'm only getting an average of 730 GH. The 5th card is not attached right now since it doesn't work.

     Let me know,

Thanks in Advance.

Just a quick idea before we get a technical answer on this. Get your brother to copy the card from his miner flash an sd card with the copied image. You can use win image 32 for making the copy.

AMT,
     I got my brothers card and tried it on my machine this morning. The top card is still dead and the hashing on "one" of the other cards looked better this morning. However I did notice that on the card that seems like its not hashing fully, the heat sink is not properly placed on the card (its lifted up from one side). So it may be that the heat on the chips on that card are overheating which causes the card to not fully hash.

     Let me know if and how I should return the top card as its not turning on at all. I will let you know what the other cards hash rate it later on when I get back home.

Thanks in Advance.

AMT,
     So to summarize here are my current machine's standing...

1.   Top card is completely dead - Never worked
2.   Second card is only partially hashing - Never fully hashed. This is the card that its heat sink doesn't look like its fully seated from one side.

      Let me know what I should do to further troubleshoot or if I should return the cards or unit?

Thanks in Advance.

Download this image, write to an SD card using win32 disk imager, and replace the existing one in the PI. See if that helps.

https://www.dropbox.com/s/7129ysi6k38obt9/amt_a1_0820v01%20a.img.bz2

default IP address is 192.168.1.100

[Syke]

Download this image, write to an SD card using win32 disk imager, and replace the existing one in the PI. See if that helps.

https://www.dropbox.com/s/uru13qfsoh4u07b/amt_a1_0820v01.img.bz2

default IP address is 192.168.1.100

A 44 MB image. That's not a complete image.

[AMT_miners]

AMT BE200 1Th 2U rack mount miner for $999 express DHL shipping included. - additional module option!



his is a 3 day build to order product. We receive your funds, we assemble your miner, we ship. We are doing 2 small SMT runs a week on Tuesday and Thursday each week. Runs are based on orders which come in, but we will run none the less. So the SMT run on Tuesday has the boards back by Wednesday assembly and testing is on Thursday and shipping is on friday. Now you understand the business model. We will leave a disclaimer for any hiccups because sometimes there are hiccups, if we do not ship within 5 days from the date your payment has been received we'll refund your money. Most likely,depending on which day you pay, we'll ship with in 2-3 days. The best days to pay are Monday and Wednesday in order to work your order into the SMT order process.


2U Rack mount BE200 (4 Modules 230Ghs - 250ghs each) with PSU sells for $999 Express 2 Day DHL shipping included. Option to include a 5th module for an additional $300. Additional modules can be sold and shipped separately to clients which have ordered the unit with 3 or 4 modules.  If you want to try 4 modules before you purchase the 5th that's what we're getting at. This also means that we need to increase the PSU from a 1000 watt psu to a 1300 watt psu.  Shipping price stays the with 5 modules. Additional shipping would be charged for the 5th modules if purchased separate, but would be something like $40-50 bucks express, haven't checked that yet. We'll try and include that in the additional module price.


2U BE200 (4 Modules 230Ghs - 250ghs each) with PSU sells for $999 Express 2 Day DHL shipping included.

WRITE TO SALES(at)ADVANCEDMINERS(dot)COM FOR MORE DETAILS.

[opieum2]

Download this image, write to an SD card using win32 disk imager, and replace the existing one in the PI. See if that helps.

https://www.dropbox.com/s/uru13qfsoh4u07b/amt_a1_0820v01.img.bz2

default IP address is 192.168.1.100

A 44 MB image. That's not a complete image.

From the looks of the files its for the configs. So not a full image dump. If I get my miners today I can make a full image default for use and review.

[AMT_miners]

Updated the image link.

https://www.dropbox.com/s/l32jbth8yks9ujl/amt_a1_0820v01%20%283%29.img.bz2

[NaranKPatel]

Download this image, write to an SD card using win32 disk imager, and replace the existing one in the PI. See if that helps.

https://www.dropbox.com/s/uru13qfsoh4u07b/amt_a1_0820v01.img.bz2

default IP address is 192.168.1.100

A 44 MB image. That's not a complete image.

From the looks of the files its for the configs. So not a full image dump. If I get my miners today I can make a full image default for use and review.

Opieum2, good luck! Let me know how it goes, how to setup and final results would be great thanks!

[opieum2]

Download this image, write to an SD card using win32 disk imager, and replace the existing one in the PI. See if that helps.

https://www.dropbox.com/s/uru13qfsoh4u07b/amt_a1_0820v01.img.bz2

default IP address is 192.168.1.100

A 44 MB image. That's not a complete image.

From the looks of the files its for the configs. So not a full image dump. If I get my miners today I can make a full image default for use and review.

Opieum2, good luck! Let me know how it goes, how to setup and final results would be great thanks!

Just to clarify in case there is confusion I am not AMT support. I am just a community member helping out other people who are in the same boat here. I have quite a bit of linux expertise and I do believe in the open source cause hence my sharing knowledge. AMT should at least post up some basic settings up for the customers to get up and running (like the default IP/ SSH and web logins to the machine in the OP). That is a general rule with any product release. Oh and source code or reference to source code if they made customization. That is both the legal thing and customary thing to do with FOSS software.