|
nonny12
|
 |
May 11, 2014, 12:32:13 AM |
|
I give up on trying to fold.
Oh  Did you wait a few minutes for the GPUs to kick in? Is your CPU trying to fold too? you have to allow cpu resources to feed the GPU's. Make sure you dont have an active cpu slot, if so, pause it. If you have a high power cpu you can adjust it in the advanced panel under configure to use just a small amount of CPU power leaving enough left over to feed the GPU's. If your machine was built for mining only , for example, many miners have a single core or dual core cpu and 4+ gpus, this will create a bottle neck. In this case you can fold with one or two GPU and see how that works. Also, it can take up to an hour sometimes before you get an accurate reading of PPD. Another note on that subject, not all work units behave the same. Sometimes they will change the TPF time during certain parts of the work unit, this throws of the PPD and time completed calculations until it is done processing that part of the WU. Very useful info, thanks. This should be added to the tutorial forum post. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Bitcoin addresses contain a checksum, so it is very unlikely that mistyping an address will cause you to lose money.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
Remember remember the 5th of November
Legendary
 Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 11, 2014, 12:34:33 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
|
|
|
nonny12
|
|
May 11, 2014, 12:47:16 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. |
|
|
|
|
|
|
|
ahmed_bodi
|
|
May 11, 2014, 12:49:34 AM |
|
I've been a follower of curecoin since the very beginning. so thats the main reason why. I'm just happy i got the pleasure of being the first pool and the first exchange offering curecoin
Ahmed
|
Bitrated user: ahmedbodi.
|
|
|
MineDMC
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 11, 2014, 12:51:47 AM |
|
I am happy to see that this coin has finally been launched, congrats!
|
|
|
|
|
|
r3animation
|
|
May 11, 2014, 01:16:37 AM |
|
Congrats on the launch.
I just wish people would just read the OP and understand what we're folding/mining for.
|
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 11, 2014, 01:20:17 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. |
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
|
r3animation
|
|
May 11, 2014, 01:23:15 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. Well it is a 5850.... My 2 x 6950 and 2 threads on the CPU is hitting 30k PPD only. Probably time for an upgrade anyway. |
|
|
|
|
traderman
Legendary
Offline
Activity: 1260
Merit: 1001
|
|
May 11, 2014, 01:23:58 AM |
|
I got a rig with 5870's and each 5870 is showing 17000 ppd, is that ok? Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. |
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 11, 2014, 01:26:08 AM |
|
I got a rig with 5870's and each 5870 is showing 17000 ppd, is that ok? Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. The 5850 isn't that far behind the 5870, I should be getting higher, with Core15 2 years ago people were doing 8k with the 5850. I think I also have the problem with the 5870. |
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Vorksholk
Legendary
Offline
Activity: 1713
Merit: 1029
|
|
May 11, 2014, 01:27:06 AM |
|
For those of you seeing exactly 1679 PPD, what is your TPF and what project were you assigned? Are you on Core_17 WUs?  |
|
|
|
|
hardcoreprime
|
|
May 11, 2014, 01:27:58 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. I've been running two computers for 25 minutes now- 6 GPU's - 7870's and 270's all showing 1679ppd I double checked and have the latest core. |
|
|
|
|
r3animation
|
|
May 11, 2014, 01:29:32 AM |
|
Any ideas why some of us only get 1679PPD on some GPUs?
How long have you been waiting? Really took about 20-30 minutes for two of my three GPUs to start getting 90%+ utilization. Now they are running constant at about 96% average and estimated at 68,000 PPD each. Hours? My 5850 is doing only 1679PPD and has 99% Utilization. No CPU folding. I've been running two computers for 25 minutes now- 6 GPU's - 7870's and 270's all showing 1679ppd I double checked and have the latest core. --client advanced? |
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 11, 2014, 01:30:21 AM |
|
For those of you seeing exactly 1679 PPD, what is your TPF and what project were you assigned? Are you on Core_17 WUs? As far as I see, FahCore is 0x17, my TPF is 2 hrs 26m, Project 13000. But you already know this, I told you this on IRC. |
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
|
hardcoreprime
|
|
May 11, 2014, 01:30:57 AM |
|
For those of you seeing exactly 1679 PPD, what is your TPF and what project were you assigned? Are you on Core_17 WUs? Estimate TPF 2hrs 26minutes Fahcore 0x17 |
|
|
|
|
milan74
|
|
May 11, 2014, 01:31:52 AM |
|
Hello, i am a newbie, and i don't understand how to mine this coin. May i ask how can i mine it with my gpu? Is there a miner? How can i fold protein? btw, i only have graphics cards, no asic thx |
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 11, 2014, 01:33:13 AM |
|
For those of you seeing exactly 1679 PPD, what is your TPF and what project were you assigned? Are you on Core_17 WUs? Estimate TPF 2hrs 26minutes Fahcore 0x17 Exact same stuff. |
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
|
milan74
|
|
May 11, 2014, 01:33:38 AM |
|
For those of you seeing exactly 1679 PPD, what is your TPF and what project were you assigned? Are you on Core_17 WUs? Estimate TPF 2hrs 26minutes Fahcore 0x17 may i ask how do you fold protein? what program do you use? |
|
|
|
|
|
