[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[anatolikostis]

hmmm, neoscript.cl on git & neoscript.cl of http://www.filedropper.com/sgminer-5-dev-neoscrypt-windows-wolf0 doesn`t match...
what`s the point?  
on the other hand - sgminer.exe of sgminer-5-dev-neoscrypt-windows-wolf0 is unstripped 

[MysteryX]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

Yep, and i've tried tweaking all of my other working configs, i'm getting same results as damm315er.

[go6ooo1212]

Any higher speed than 325kH/s on 280X ?

[damm315er]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

LOL, your config gives me bluescreens and driver crashes.

Anything else gives me ~100k and nothing but HW.

Back to the old and ~330k way till the dust settles a bit..   

Ah... I never used it on a 290X that was running a display...

Yeah, the monitor is on a 290..  When it gets laggy is when I stop cranking that one up, but the other 290 usually doesn't tune up much faster.

But I toned your settings back quite a bit (I11, w32, powertune 20) and still driver crash on 1st attempt and blue screen on the 2nd, every time.  Probably a driver issue, I've got the 14.2 in there because it worked for the other miner.

[platinum4]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

This miner generates sporadic HW errors on x[n] algos, did you fork the right version?

[platinum4]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

This miner generates sporadic HW errors on x[n] algos, did you fork the right version?

I took it from the develop branch.

It builds as 4.2.2 not sgminer5.1.0-dev

[ebliever]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

It's not working for me either. Runs painfully slow (~100 khash on 290X's), lots of crashes... when I ran the latest download with my old config, it yielded exactly the same hashrate as before. So it's like it had zero impact. I've been going through your config trying pieces of it within my own, but that's not working either.

I'm using 14.6 and 14.9 for binaries. One big difference between your config and mine is that I lose at least 30% of my hashrate going from 2 GPU threads to 1, and I have to specify a lookup gap of 4 or the miner won't run. I13 with W96 gives me best results by a significant margin. I can post my config here if anyone thinks it would help. I top out at 336 khash at 1150/1500, though one GPU is prone to hardware errors at 1150 so I keep it at 1125.

[semajjames]

Talking of swapping cl files Wolf0  ,,,,,, I've been using your last modded .cl file with this new miner is that the idea or is that going to fuck it up ? lol

[semajjames]

4 x 290X (Hynix) overclocked @ 1200/1500



For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

wait a minute it no good getting at Wolf0 about this couse this guy got loads of hash BUT look at those temps and fan speeds,,,
that has got to be water cooled or not 14.6 drivers or inside an igloo

[btctradingonline]

who can help me, what kind of best sgminer for 280X and the config to get 3xx on hash, because i used "sgminer-5.1-dev-2014-11-13-win32.zip", my hash of 280X is 283.

But i used "sgminer-5-dev-neoscrypt-windows.zip" or "sgminer-5-dev-neoscrypt-windows-Wolf0" and "wolf-neo-sgminer5-hawaii-11212014" ,
it only runs at 140, and with the config of Mr Wolf , so many HW.

[btctradingonline]

who can help me, what kind of best sgminer for 280X and the config to get 3xx on hash, because i used "sgminer-5.1-dev-2014-11-13-win32.zip", my hash of 280X is 283.

But i used "sgminer-5-dev-neoscrypt-windows.zip" or "sgminer-5-dev-neoscrypt-windows-Wolf0" and "wolf-neo-sgminer5-hawaii-11212014" ,
it only runs at 140, and with the config of Mr Wolf , so many HW.

Yeah, I think I might have statically linked against the AMD drivers - I'll need to fix it and re-release binaries >.<

thank you so much.

[ebliever]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

It's not working for me either. Runs painfully slow (~100 khash on 290X's), lots of crashes... when I ran the latest download with my old config, it yielded exactly the same hashrate as before. So it's like it had zero impact. I've been going through your config trying pieces of it within my own, but that's not working either.

I'm using 14.6 and 14.9 for binaries. One big difference between your config and mine is that I lose at least 30% of my hashrate going from 2 GPU threads to 1, and I have to specify a lookup gap of 4 or the miner won't run. I13 with W96 gives me best results by a significant margin. I can post my config here if anyone thinks it would help. I top out at 336 khash at 1150/1500, though one GPU is prone to hardware errors at 1150 so I keep it at 1125.

Wait, wait, wait - you compiled the miner itself, right? Not just swapped out the CL files?

I used the files you provided in post #2397 on this thread (https://ottrbutt.com/sgminer/neoscrypt/wolf-neo-sgminer5-hawaii-11212014.zip). I just created an empty directory, put the sgminer.exe in it and the kernels in a /kernel/ subfolder. I think I tried it like that, then added all the .dll's from the previous version I was using (I think one from Badman, from Nov. 12).

[platinum4]

I'm using 14.6 drivers and only getting HW errors using a ton of different configs, any ideas? (290x, hashrate is only showing around 100k, usually about 300k)

Have you tried my config?

It's not working for me either. Runs painfully slow (~100 khash on 290X's), lots of crashes... when I ran the latest download with my old config, it yielded exactly the same hashrate as before. So it's like it had zero impact. I've been going through your config trying pieces of it within my own, but that's not working either.

I'm using 14.6 and 14.9 for binaries. One big difference between your config and mine is that I lose at least 30% of my hashrate going from 2 GPU threads to 1, and I have to specify a lookup gap of 4 or the miner won't run. I13 with W96 gives me best results by a significant margin. I can post my config here if anyone thinks it would help. I top out at 336 khash at 1150/1500, though one GPU is prone to hardware errors at 1150 so I keep it at 1125.

Wait, wait, wait - you compiled the miner itself, right? Not just swapped out the CL files?

I used the files you provided in post #2397 on this thread (https://ottrbutt.com/sgminer/neoscrypt/wolf-neo-sgminer5-hawaii-11212014.zip). I just created an empty directory, put the sgminer.exe in it and the kernels in a /kernel/ subfolder. I think I tried it like that, then added all the .dll's from the previous version I was using (I think one from Badman, from Nov. 12).

Then yeah, I think it's fucked. Damn.

It's all good man.  You done good.  Try and rebase from the 5.1.0-develop branch so that the HW error calc bug is fixed from ystarnaud's commits, then push your hard-coded stuff in there.  You had it right just was a day too early!

Don't forget us Windows folks we need them binaries.

[tccd]

4 x 290X (Hynix) overclocked @ 1200/1500

http://store.picbg.net/pubpic/0E/A7/80c68e6dbdb20ea7.png

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

wait a minute it no good getting at Wolf0 about this couse this guy got loads of hash BUT look at those temps and fan speeds,,,
that has got to be water cooled or not 14.6 drivers or inside an igloo

Not really, dude - open air rig in cold weather with good coolers will produce that.

Nope. Watercooling FTW and driver Catalyst 14.6

http://store.picbg.net/thumb/03/DA/20d567f6cdd803da.jpg

[anatolikostis]

4 x 290X (Hynix) overclocked @ 1200/1500

http://store.picbg.net/pubpic/0E/A7/80c68e6dbdb20ea7.png

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

wait a minute it no good getting at Wolf0 about this couse this guy got loads of hash BUT look at those temps and fan speeds,,,
that has got to be water cooled or not 14.6 drivers or inside an igloo

Not really, dude - open air rig in cold weather with good coolers will produce that.

Nope. Watercooling FTW and driver Catalyst 14.6

I don`t get it:  
how you cards pushes so much hashes with the help of old neoscript.cl-file 24kB & unstripped sgminer.exe 2.5mB 

[lobo13hf]

4 x 290X (Hynix) overclocked @ 1200/1500

http://store.picbg.net/pubpic/0E/A7/80c68e6dbdb20ea7.png

For configuration check: https://github.com/wolf9466/neo-sgminer5-hawaii/blob/master/neoscrypt.conf

wait a minute it no good getting at Wolf0 about this couse this guy got loads of hash BUT look at those temps and fan speeds,,,
that has got to be water cooled or not 14.6 drivers or inside an igloo

Not really, dude - open air rig in cold weather with good coolers will produce that.

Nope. Watercooling FTW and driver Catalyst 14.6

where u get the Watercooling FTW from?

[scryptr]

SGMINER-

After cloning the latest git (81d9c9e574866cd5e10794875872c9c08b11bd2b), 3 days old today, I follwed the *.nix build instructions:

git submodule init
git submodule update
autoreconf -i
CFLAGS="-O2 -Wall -march=native -I /opt/AMDAPPSDK-2.9-1/include/" LDFLAGS="-L/opt/AMDAPPSDK-2.9-1/lib/x86_64/" ./configure --enable-neoscrypt
make

I get a compile error:

make[2]: Leaving directory `/home/borqd/master/sph'
make[2]: Entering directory `/home/borqd/master'
  CC       sgminer-sgminer.o
sgminer.c: In function ‘stratum_sthread’:
sgminer.c:5500:15: warning: unused variable ‘nonce2_64’ [-Wunused-variable]
     uint64_t *nonce2_64;
               ^
sgminer.c: In function ‘main’:
sgminer.c:8476:3: error: ‘s’ undeclared (first use in this function)
   s = strdup(argv[0]);
   ^
sgminer.c:8476:3: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [sgminer-sgminer.o] Error 1
make[2]: Leaving directory `/home/borqd/master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/borqd/master'
make: *** [all] Error 2

My computer is at the command prompt with no runtime sgminer file.  What is wrong?       -scryptr

edit:  I checked the source code and the error reports appear to be correct.  I am guessing that the errors are typos, but I haven't been able to correct them.       --scryptr
second edit: corrected typo in this post, reflecting an incorrect CFLAGS line.  Checked my ubuntu 14.04.1 rig, and noticed the CLFAGS line had benn entered correctly when compiling.  Typo crept in during cut-and-paste for this post.   -scryptr

[whitecloud]

Hi,
Win 8.1 x64, 4.9, R200 280x.
I put 14.6 RC2 AMD OCL (4 files with *.dll estension) on folder with sgminer, but:

Started sgminer 5.1.0-dev
* using Jansson 2.6
clDeviceNum returned error, no GPUs usable
All devices disabled, cannot mine!

What is wrong ?

[capler]

SGMINER-

After cloning the latest git (81d9c9e574866cd5e10794875872c9c08b11bd2b), 3 days old today, I follwed the *.nix build instructions:

git submodule init
git submodule update
autoreconf -i
CFLAGS=CFLAGS="-O2 -Wall -march=native -I /opt/AMDAPPSDK-2.9-1/include/" LDFLAGS="-L/opt/AMDAPPSDK-2.9-1/lib/x86_64/" ./configure --enable-neoscrypt
make

I get a compile error:

make[2]: Leaving directory `/home/borqd/master/sph'
make[2]: Entering directory `/home/borqd/master'
  CC       sgminer-sgminer.o
sgminer.c: In function ‘stratum_sthread’:
sgminer.c:5500:15: warning: unused variable ‘nonce2_64’ [-Wunused-variable]
     uint64_t *nonce2_64;
               ^
sgminer.c: In function ‘main’:
sgminer.c:8476:3: error: ‘s’ undeclared (first use in this function)
   s = strdup(argv[0]);
   ^
sgminer.c:8476:3: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [sgminer-sgminer.o] Error 1
make[2]: Leaving directory `/home/borqd/master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/borqd/master'
make: *** [all] Error 2

My computer is at the command prompt with no runtime sgminer file.  What is wrong?       -scryptr

edit:  I checked the source code and the error reports appear to be correct.  I am guessing that the errors are typos, but I haven't been able to correct them.       --scryptr

I'm have this error too. Please help

[Pansyfaust]

Hi,
Win 8.1 x64, 4.9, R200 280x.
I put 14.6 RC2 AMD OCL (4 files with *.dll estension) on folder with sgminer, but:

Started sgminer 5.1.0-dev
* using Jansson 2.6
clDeviceNum returned error, no GPUs usable
All devices disabled, cannot mine!

What is wrong ?

Try adding gpu-platform 1  to your config.