platinum4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 01:12:09 AM |
|
What are you guys getting for Neoscrypt efficiency? Hash per watt, power draw at the wall?
Dick. But it appears to be most profitable on nicehash again; even with the salty bottlenecked neoscrypt.cl you released for us around Veteran's Day. (thanks again) Actually, that was the best I had at the time - also, you aren't entitled to jack shit from me, need I remind you? Complain to Vehre - his code got less than 100kh/s on a 280X. Would you rather have that instead? For the rest of you, since I've gotten a lot of people asking, I made another SGMiner 5 build off the git master branch: https://litecointalk.org/index.php?topic=17533 -- see the bottom of the OP for the latest. Did you ever get around to identifying your neoscrypt kernels so that people could tell which is which? Well, now there's really just one major one, and the Hawaii one that wasn't a good idea. Well, it wasn't until I downloaded the new SG5-wolf from yesterday and compared the neoscrypt files that I found out that it had the same 2 month old kernel.. For some reason I was expecting a different neoscrypt kernel in it. I think that's just a 64-bit Windows build as opposed to 32-bit ones from badman74, djm34, etc.
|
|
|
|
damm315er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 02:48:59 AM |
|
What are you guys getting for Neoscrypt efficiency? Hash per watt, power draw at the wall?
Dick. But it appears to be most profitable on nicehash again; even with the salty bottlenecked neoscrypt.cl you released for us around Veteran's Day. (thanks again) Actually, that was the best I had at the time - also, you aren't entitled to jack shit from me, need I remind you? Complain to Vehre - his code got less than 100kh/s on a 280X. Would you rather have that instead? For the rest of you, since I've gotten a lot of people asking, I made another SGMiner 5 build off the git master branch: https://litecointalk.org/index.php?topic=17533 -- see the bottom of the OP for the latest. Did you ever get around to identifying your neoscrypt kernels so that people could tell which is which? Well, now there's really just one major one, and the Hawaii one that wasn't a good idea. Well, it wasn't until I downloaded the new SG5-wolf from yesterday and compared the neoscrypt files that I found out that it had the same 2 month old kernel.. For some reason I was expecting a different neoscrypt kernel in it. I think that's just a 64-bit Windows build as opposed to 32-bit ones from badman74, djm34, etc. Yeah - plus no DLLs and such to carry around. Yeah, those are heavy... lol
|
|
|
|
badman74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 03:58:39 AM |
|
What are you guys getting for Neoscrypt efficiency? Hash per watt, power draw at the wall?
Dick. But it appears to be most profitable on nicehash again; even with the salty bottlenecked neoscrypt.cl you released for us around Veteran's Day. (thanks again) Actually, that was the best I had at the time - also, you aren't entitled to jack shit from me, need I remind you? Complain to Vehre - his code got less than 100kh/s on a 280X. Would you rather have that instead? For the rest of you, since I've gotten a lot of people asking, I made another SGMiner 5 build off the git master branch: https://litecointalk.org/index.php?topic=17533 -- see the bottom of the OP for the latest. Did you ever get around to identifying your neoscrypt kernels so that people could tell which is which? Well, now there's really just one major one, and the Hawaii one that wasn't a good idea. Well, it wasn't until I downloaded the new SG5-wolf from yesterday and compared the neoscrypt files that I found out that it had the same 2 month old kernel.. For some reason I was expecting a different neoscrypt kernel in it. I think that's just a 64-bit Windows build as opposed to 32-bit ones from badman74, djm34, etc. Yeah - plus no DLLs and such to carry around. I would love to build it to work without the dll's but I have no idea how...
|
|
|
|
damm315er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 04:51:41 AM |
|
What are you guys getting for Neoscrypt efficiency? Hash per watt, power draw at the wall?
Dick. But it appears to be most profitable on nicehash again; even with the salty bottlenecked neoscrypt.cl you released for us around Veteran's Day. (thanks again) Actually, that was the best I had at the time - also, you aren't entitled to jack shit from me, need I remind you? Complain to Vehre - his code got less than 100kh/s on a 280X. Would you rather have that instead? For the rest of you, since I've gotten a lot of people asking, I made another SGMiner 5 build off the git master branch: https://litecointalk.org/index.php?topic=17533 -- see the bottom of the OP for the latest. Did you ever get around to identifying your neoscrypt kernels so that people could tell which is which? Well, now there's really just one major one, and the Hawaii one that wasn't a good idea. Well, it wasn't until I downloaded the new SG5-wolf from yesterday and compared the neoscrypt files that I found out that it had the same 2 month old kernel.. For some reason I was expecting a different neoscrypt kernel in it. I think that's just a 64-bit Windows build as opposed to 32-bit ones from badman74, djm34, etc. Yeah - plus no DLLs and such to carry around. I would love to build it to work without the dll's but I have no idea how... Static linking is awesome. I also GPG sign my builds, so I'm staking my reputation on both the forums and OTC that anything I sign is clean. I've seen those pics of your desktop, what kind of a reputation are you trying to establish? lol
|
|
|
|
kenshirothefist (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 08:51:00 AM |
|
@Wolf0, @badman74, @djm34, etc. guys, guys, guys ... as I said many times before you are all great programmers (and I sent tips to all of you for your great public work) but you really lack one skill that is crucial for open source development, and that is team work. It is OK for each of you to optimize some kernels and not share it publicly to get maximum profit out of your own work. But as far as core development and binary distribution it should be done at one central place. People on this thread get lost when looking for binaries, trying various builds, many times hits an older build, build with bugs, etc. Linus Torvalds designed and developed Git with powerful branching in mind with this purpose - you can keep your branches, but should also maintain a master branch and not make thousands of forks even for smallest and marginal changes. https://github.com/sgminer-dev/sgminer is a good central place and binaries could be placed at the Releases section https://github.com/sgminer-dev/sgminer/releases ... So, can you put your self together and work as a team? You should all take a look at this talk: https://www.youtube.com/watch?v=5pOxlazS3zs (especially from minute 2 to minute 5, but preferably whole video). Anyway, keep up the good work ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 11:47:00 AM |
|
@Wolf0, @badman74, @djm34, etc. guys, guys, guys ... as I said many times before you are all great programmers (and I sent tips to all of you for your great public work) but you really lack one skill that is crucial for open source development, and that is team work. It is OK for each of you to optimize some kernels and not share it publicly to get maximum profit out of your own work. But as far as core development and binary distribution it should be done at one central place. People on this thread get lost when looking for binaries, trying various builds, many times hits an older build, build with bugs, etc. Linus Torvalds designed and developed Git with powerful branching in mind with this purpose - you can keep your branches, but should also maintain a master branch and not make thousands of forks even for smallest and marginal changes. https://github.com/sgminer-dev/sgminer is a good central place and binaries could be placed at the Releases section https://github.com/sgminer-dev/sgminer/releases ... So, can you put your self together and work as a team? You should all take a look at this talk: https://www.youtube.com/watch?v=5pOxlazS3zs (especially from minute 2 to minute 5, but preferably whole video). Anyway, keep up the good work ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) nice presentation... however I don't remember what was exactly between 2 and 5min. (also my interest in linux stopped a long time ago when they tried to make it looks like windows with ugly icons and get away from the unix looks and feel... and even made things difficult just to open a terminal... at that point I preferred to switch entirely to windows) I intended to move my change to sgminer-dev (even made a pull request) but I was asked to make a few change to comply with their coding rule.... and I don't have time for this at the moment, but I will come to it eventually...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 05:13:40 PM |
|
What's the recommended settings for a R9 290 trixx ? Only getting 110Kh on neoscrypt ![Angry](https://bitcointalk.org/Smileys/default/angry.gif)
|
|
|
|
andro1970
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 05:47:58 PM |
|
I have some problem ....
[23:30:51] Started sgminer 4.2.2-310-g8985f-dirty [23:30:51] * using Jansson 2.6 [23:30:51] Loaded configuration file sgminer.conf [23:30:51] Probing for an alive pool [23:30:52] Switching to NiceHash_X13_multi - first alive pool [23:30:52] Startup GPU initialization... Using settings from pool NiceHash_X13_multi. [23:30:52] Startup Pool No = 3 [23:30:52] Initialising kernel marucoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024 [23:30:52] Maximum buffer memory device 0 supports says 535822336 [23:30:52] Your settings come to 536870912 [23:30:52] Error -61: clCreateBuffer (padbuffer8), decrease TC or increase LG [23:30:52] Failed to init GPU thread 0, disabling device 0 [23:30:52] Restarting the GPU from the menu will not fix this. [23:30:52] Re-check your configuration and try restarting. Press enter to continue:
p.s set GPU_MAX_ALLOC_PERCENT=100 - enable CPU:AMD-A4-6300 with Radeon RAM:4G
|
|
|
|
damm315er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 05:53:41 PM |
|
What's the recommended settings for a R9 290 trixx ? Only getting 110Kh on neoscrypt ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Run SGminer with the latest kernel, with 14.9 drivers on the machine and 14.6 drivers in the folder. And pick your favorite intensity/xintensity settings. With the latest bottlenecked kernel, I've gotten 330k+ each, detuned a little because of bad fans. (the 330k+ are trixx 290's and the HW's are because of heat, the 301k are other GPU's) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZ44Apfy.jpg%3F1&t=665&c=BPLF5rSCp4rFlg)
|
|
|
|
andro1970
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 05:57:59 PM |
|
I have some problem ....
[23:30:51] Started sgminer 4.2.2-310-g8985f-dirty [23:30:51] * using Jansson 2.6 [23:30:51] Loaded configuration file sgminer.conf [23:30:51] Probing for an alive pool [23:30:52] Switching to NiceHash_X13_multi - first alive pool [23:30:52] Startup GPU initialization... Using settings from pool NiceHash_X13_multi. [23:30:52] Startup Pool No = 3 [23:30:52] Initialising kernel marucoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024 [23:30:52] Maximum buffer memory device 0 supports says 535822336 [23:30:52] Your settings come to 536870912 [23:30:52] Error -61: clCreateBuffer (padbuffer8), decrease TC or increase LG [23:30:52] Failed to init GPU thread 0, disabling device 0 [23:30:52] Restarting the GPU from the menu will not fix this. [23:30:52] Re-check your configuration and try restarting. Press enter to continue:
p.s set GPU_MAX_ALLOC_PERCENT=100 - enable CPU:AMD-A4-6300 with Radeon RAM:4G
And you don't bother to show us the command line/batch file/conf file... { "pools" : [ { "name" : "NiceHash_Scrypt_multi", "url" : "stratum+tcp://stratum.nicehash.com:4333", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "zuikkis" }, { "name" : "NiceHash_Scrypt-N_multi", "url" : "stratum+tcp://stratum.nicehash.com:4335", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "11", "algorithm" : "zuikkis" }, { "name" : "NiceHash_X11_multi", "url" : "stratum+tcp://stratum.nicehash.com:4336", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "darkcoin-mod" }, { "name" : "NiceHash_X13_multi", "url" : "stratum+tcp://stratum.nicehash.com:4337", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "marucoin-mod" }, { "name" : "NiceHash_Keccak_multi", "url" : "stratum+tcp://stratum.nicehash.com:4338", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "maxcoin" }, { "name" : "NiceHash_X15_multi", "url" : "stratum+tcp://stratum.nicehash.com:4339", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "bitblock" }, { "name" : "NiceHash_NIST5_multi", "url" : "stratum+tcp://stratum.nicehash.com:4340", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "talkcoin-mod" }, { "name" : "NiceHash_NeoScrypt_multi", "url" : "stratum+tcp://stratum.nicehash.com:4341", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "neoscrypt" }, { "name" : "NiceHash_Lyra2RE_multi", "url" : "stratum+tcp://stratum.nicehash.com:4342", "user" : "1hajStUB86VJwBoV7C5yodGTaW3chxstA", "pass" : "x", "nfactor" : "10", "algorithm" : "Lyra2RE" }
], "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0" } command line is empty (only sdminer.exe)
|
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 09:33:38 PM |
|
What's the recommended settings for a R9 290 trixx ? Only getting 110Kh on neoscrypt ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Run SGminer with the latest kernel, with 14.9 drivers on the machine and 14.6 drivers in the folder. And pick your favorite intensity/xintensity settings. With the latest bottlenecked kernel, I've gotten 330k+ each, detuned a little because of bad fans. (the 330k+ are trixx 290's and the HW's are because of heat, the 301k are other GPU's) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZ44Apfy.jpg%3F1&t=665&c=BPLF5rSCp4rFlg) What kernel is it?
|
|
|
|
damm315er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 10:27:33 PM |
|
What's the recommended settings for a R9 290 trixx ? Only getting 110Kh on neoscrypt ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Run SGminer with the latest kernel, with 14.9 drivers on the machine and 14.6 drivers in the folder. And pick your favorite intensity/xintensity settings. With the latest bottlenecked kernel, I've gotten 330k+ each, detuned a little because of bad fans. (the 330k+ are trixx 290's and the HW's are because of heat, the 301k are other GPU's) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZ44Apfy.jpg%3F1&t=665&c=BPLF5rSCp4rFlg) What kernel is it? What makes you think it's not the one that comes with SGMiner? (It is, I think.) It is the kernel that comes with the current SGminer... Either the nicehash dev build, or the wolf branch, it makes no difference. (although the 64 bit wolf version is good for about an extra ~2 kh/s per GPU, being 64 bit) I did specify the latest kernel.
|
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 04:22:00 AM |
|
What's the recommended settings for a R9 290 trixx ? Only getting 110Kh on neoscrypt ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Try xintensity 3 or 4 with 2 gpu threads, also, overclock it. Latest SGminer, 14.9 installed using 14.6 drivers. xintensity gives me HW errors (nonce) intensity 14-17 gives me only 237Kh/s Any tips for 290 trixx? "pools" : [
{ "name" : "", "url" : "", "user" : "", "pass" : "", "intensity" : "17", "kernel" : "neoscrypt" } ], "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0",
"api-listen": true, "api-port": "4028", "api-allow": "W:127.0.0.1",
"auto-fan" : true, "auto-gpu" : true, "gpu-threads" : "2", "kernel-path" : "/usr/local/bin" }
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 04:42:05 AM |
|
do you plan to make a build for mac os?
I'm interested in a Mac OS X version too.
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 04:52:59 AM |
|
Try 13, like damm315er is using.
Thx wolf, 13 is giving me 240. Still far away from +300
|
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 04:59:51 AM |
|
Try 13, like damm315er is using.
Thx wolf, 13 is giving me 240. Still far away from +300 Try xI 3 or 4, but specify thread concurrency with it. Set it to 16384. Also, what clocks? xi 3-4 with concurrency 16384 gives me even less, around 220. Clocks default 1000-1300, tried on 1050-1400 to.
|
|
|
|
damm315er
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 09:56:36 AM |
|
Try 13, like damm315er is using.
Thx wolf, 13 is giving me 240. Still far away from +300 Try xI 3 or 4, but specify thread concurrency with it. Set it to 16384. Also, what clocks? xi 3-4 with concurrency 16384 gives me even less, around 220. Clocks default 1000-1300, tried on 1050-1400 to. try 1130/1475, with -I 13 & -g 2, and keep tinkering with the worksize and TC. It took me about 20 hours of trial and error to hit that mark. Speaking of which, those GPU's just came back from warranty replacement, time to see if I can top it with good fans!!
|
|
|
|
Zuikkis
Newbie
Offline
Activity: 57
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 10:54:09 AM |
|
Try memclock 1500, or if that is not stable, try 1250.
AMD gpus have memory timings set at 125MHz intervals, always ending at even 125MHz. Like this:
875-1000 1001-1125 1126-1250 1251-1375 1376-1500 1501-1625
mining is mostly about random access latency, not about sequential reads. You get best random access speed at the high end of each range, like 1250 or 1500.
It's very likely that 1250MHz is faster than 1400MHz, because 1400MHz is so close to the start of the range and 1250 is exactly at the end..
|
|
|
|
bitspender
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 05:44:11 PM |
|
Got it running around 310Kh.
I think i'll take that instead of tweaking further to gain just a little bit more.
Thank you all!
|
|
|
|
jch9678
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 07:35:58 PM |
|
Try 13, like damm315er is using.
Thx wolf, 13 is giving me 240. Still far away from +300 Try xI 3 or 4, but specify thread concurrency with it. Set it to 16384. Also, what clocks? I know this was a while ago but ystarnaud said that xintensity and rawintensity are unused. https://bitcointalk.org/index.php?topic=632503.msg9475388#msg9475388That was on Nov. 7 so I guess xI does now work with neo. That's good news I was about to make a bunch of bins with different intensities with the 13.12 drivers and then upgrade to 14.6 rc2. Is making bins with 13.12 a waste of time?
|
BTC: 15GqpmqNNJ1REWrDWTfymh7moos1sEvz7A
|
|
|
|