jimmothy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 09:19:47 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 09:32:13 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not.
|
|
|
|
tempestb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 09:40:18 PM |
|
I'm waiting on the RE-BOX. Can mine or be worn as a shoe.
Either way, when these things get out of testing and into reseller hands, that would be great. I would think you should be able to mine on a PC as well as a Pie.
|
1D7JwRnoungL1YQy7sJMsqmA8BHkPcKGDJ We mine as we dream... Alone
|
|
|
CanaryInTheMine
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 09:40:21 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not. I don't see why not. since BE200 chip supports a range of frequencies.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:00:59 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not. I don't see why not. since BE200 chip supports a range of frequencies. Haven't seen any live demo of it so I will be reserved until I see proof.
|
|
|
|
bobsag3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:11:51 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not. I don't see why not. since BE200 chip supports a range of frequencies. Haven't seen any live demo of it so I will be reserved until I see proof. Theres plenty of BE200 chip based miners out there, at a wide range of freq and efficiency.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:14:24 PM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not. I don't see why not. since BE200 chip supports a range of frequencies. Haven't seen any live demo of it so I will be reserved until I see proof. Theres plenty of BE200 chip based miners out there, at a wide range of freq and efficiency. No miner is under 1W/GH so the range isn't so wide for better efficiency.
|
|
|
|
jimmothy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:20:07 PM |
|
No miner is under 1W/GH so the range isn't so wide for better efficiency.
Did you not see the new opensource miner from friedcat? https://bitcointalk.org/index.php?topic=641957.200.85w/gh excluding psu loss. Also the chips are clocked at 8gh/s so there is a good chance this is not the max efficiency.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:42:10 PM |
|
No miner is under 1W/GH so the range isn't so wide for better efficiency.
Did you not see the new opensource miner from friedcat? https://bitcointalk.org/index.php?topic=641957.200.85w/gh excluding psu loss. Also the chips are clocked at 8gh/s so there is a good chance this is not the max efficiency. How can you use 0.85w/gh if you don't have a psu? How much is the loss for the PSU? 20%? That means it will be 1.02w/gh. And that's only friedcat claim. I'm waiting for real live proof because we can all claim a lot of stuff. By this logic SP10 is just 0.58w/gh if we exclude all losses!
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2014, 10:53:41 PM |
|
No miner is under 1W/GH so the range isn't so wide for better efficiency.
Did you not see the new opensource miner from friedcat? https://bitcointalk.org/index.php?topic=641957.200.85w/gh excluding psu loss. Also the chips are clocked at 8gh/s so there is a good chance this is not the max efficiency. How can you use 0.85w/gh if you don't have a psu? How much is the loss for the PSU? 20%? That means it will be 1.02w/gh. And that's only friedcat claim. I'm waiting for real live proof because we can all claim a lot of stuff. By this logic SP10 is just 0.58w/gh if we exclude all losses! psu is about a 10-15% efficiency loss
|
|
|
|
klintay
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 04:50:55 AM |
|
+1 same commands as cgminer? No, BFGMiner has a standard interface for all drivers. So something like: bfgminer -S rockminer:all --set rockminer:clock=290 Edit: Also note that if you were using cgminer, you had to use Zadig, which breaks the official drivers. You will need to undo this (and restore the original driver) before BFGMiner will work. thanks!
How does one go about "undoing" the use of Zadig and restore the original drivers? Thanks!
It is under device manager. Find your miner and go to advance properties and then uninstall driver.
|
|
|
|
mstrongbow
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 322
Merit: 250
3D Printed!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 05:08:11 AM |
|
+1 same commands as cgminer? No, BFGMiner has a standard interface for all drivers. So something like: bfgminer -S rockminer:all --set rockminer:clock=290 Edit: Also note that if you were using cgminer, you had to use Zadig, which breaks the official drivers. You will need to undo this (and restore the original driver) before BFGMiner will work. thanks!
How does one go about "undoing" the use of Zadig and restore the original drivers? Thanks!
It is under device manager. Find your miner and go to advance properties and then uninstall driver. Or just install the NEW driver over the old one, I just did that with no issues. Although I do plan on running a registry cleaner soon. I am now using MultiMiner with my R-Box units! So awesomeness!!!
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 08:51:31 AM |
|
And 13% extra efficiency is BEFORE PSU so in the end it's more than 13% extra efficiency. SP10 is ~1w/gh at the wall. rk-box is ~1.15w/gh at the wall. Default for SP10 is 0.85W/GH and can go down to 0.7W/GH if needed. RK-BOX is 1.15W/GH and nobody knows if it can go down if needed or not. More likely not. I don't see why not. since BE200 chip supports a range of frequencies. Haven't seen any live demo of it so I will be reserved until I see proof. Theres plenty of BE200 chip based miners out there, at a wide range of freq and efficiency. No miner is under 1W/GH so the range isn't so wide for better efficiency. Isn't it all a moot point seeing as you cannot buy now, nor in the future SP10's?
|
|
|
|
Tips4TaT
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 06:48:41 PM |
|
So the RX-BOX is 1200W total?
1.2W/G/S?
|
|
|
|
ChuckBuck
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 06:57:05 PM |
|
So the RX-BOX is 1200W total?
1.2W/G/S?
The Chinese version is 1440W total(2 * 600 GH/s modules). The non Chinese version is 2880W total(4 * 600 GH/s modules). Neither version come with power supplies.
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 07:05:46 PM |
|
And just to clarify - we can purchase starting 6/25 on the website or through distributors like Canary?
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 07:38:15 PM |
|
Isn't it all a moot point seeing as you cannot buy now, nor in the future SP10's?
Not really. The future requires miners with better power efficiency. It seems that since last year there was always a shortage of "good" miners. Only overpriced or less efficient miners were always available to buy from stock. The SP10 was shipping from stock for ~2 weeks. Good miners are always hard to get your hands on. That's why people were paying 30K$ for a B1 Avalon or 20k$ for a Jupiter in hand. Better hurry to buy some September SP30 units until they go out of stock too.
|
|
|
|
warrensgun
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 195
Merit: 100
Mining since bitcoin was $1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 07:53:32 PM |
|
Rocket Box is 450 Ghash at 480watt. RX-Box is 2400 Ghash at 1.2w/ghash
The pictures are the same. Is an RX-Box just 4 Rocket Boxes over clocked? or are the boards bigger with more chips?
|
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2014, 08:23:19 PM |
|
If purchased separately from your site, how many boxes Rasp pi can drive-1 or 2? I would need rasp pi, but I have plenty of power supplies, but this option does not exist.
|
|
|
|
|