Claymore's CryptoNote AMD GPU Miner v11.3

[hexing110]

https://bitcointalk.org/index.php?action=post;topic=638915.6000;num_replies=6012
Hi, Claymore's CryptoNote AMD GPU Miner v9.7 with v7 algo support?
Accustomed to using Claymore's 9.7 version
Can you add the V7 and XHV algorithms to the 9.7 version? thank you very much

[The Crazy Miner]

claymore cryptonote gives me 820hs per rx 580. I am trying to mine Haven coin though and the claymore cryptonote miner doesn't work. I downloaded the xmr stak haven miner and its a pile of crap

[dougyfresh]

When new versions with v7 algo support???

In a few days.

Hi, Claymore's CryptoNote AMD GPU Miner v9.7 with v7 algo support? Never?

Ditto.. I have an old 6950 that works with v9.7 and... It would be awesome to be able to put it to use on Pow7...just for fun...in my room

[monroexbtc]

Do you mean XMR stak is 20% faster than Claymore?

Yes. Read my previous comments and links.

No, XMR-STAK do NOT outperform CCNM by 20%. At least not with Terascale GPUs. It is not easy even to get comparable performance. The problem is that CCNM wil not use Terascale any more after v7 fork.

[/quote]

Again, read my previous comments and links. You can achieve parity with XMR stak and even outperform CCNM precisely on TeraScale. It depends if you find the right intensity and worksize. Also the main problem with STAK and TeraScale was that it only detected 384mb of memory which limited every single card, now that has been addressed in this issue through my help and the help of other contributors https://github.com/fireice-uk/xmr-stak/issues/472

I got 6990s doing ~395-400h/s per core, ~800h/s per gpu total on stak, vs 374 per core or ~ 750h/s on CCNM. Core clock and memory clocks identical in both cases.

It's no problem that CCNM will not support terascale anymore, problem is people are too lazy to work out a solution for themselves.

[pskhv]

CaperVerde and Bonaire/Tobago not support now? Before hardfork i'm used version 9.7.
Claymore, add this adapters or add pow7 to 9.7 please.

Code:

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

AMD Cards available: 2
GPU #0: Capeverde (AMD Radeon R7 200 Series), 1024 MB available, 10 compute unit
s (pci bus 2:0:0)
GPU #1: Bonaire (AMD Radeon R7 200 Series), 2048 MB available, 14 compute units
(pci bus 3:0:0)
POOL version
No ASM binary found for GPU 0
No ASM binary found for GPU 1
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
GPU #1 algorithm ASM, -h 896, -dmem 0 (Memory used: 1836MB)
Total cards: 2

. . .

XMR - Total Speed: 0 H/s, Total Shares: 0(0+0), Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s

[Littlegrand]

Any word if Claymore is going to add Cryponote-Heavy to the miner?

Thanks,
--J

[MadSilence]

Hi man!

I really love your miner! I use both the monero and ZEC version.

I was wondering if by any chance you could include the amd 6xxx line in the next update. I have many rigs running 6xxx cards still and after the fork they will be totally useless!!!!! :O  I can donate some crypto your way if it helps!

My old 6990 is still hashing pretty good!=)

Thanks for your good work on the miner!!!=)

[micax1]

Just tried 11.3 on nicehash cryptonightv7 - getting 100% rejects with : "Shareabovetarget" error,
Anyone knows if its just nicehash testnet or miner settings problem?
Thanks!

[Atomicc]

Is there any option to mine Cryptonight Heavy algo (Haven, Stellite...), with this latest version?
Thank You for an answer...

[The Hitman]

Is there any option to mine Cryptonight Heavy algo (Haven, Stellite...), with this latest version?
Thank You for an answer...

Same question. Im so used to Claymore for SUMOKOIN. I hope they have time to add CN-Heavy support, coz they will be so busy making new versions every 6 months for XMR

[JuanHungLo]

I wanting to find out if anyone else is, or has, experienced this problem detailed below:

Win 7-64 with Robinhood's AMD drivers (22.19.659.1).

I have an interesting problem in 2 of my rigs that use 2 Rx 470 8GB Sapphires (Samsung):
Here is batch:

set GPU_FORCE_64BIT_PTR=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100

NsGpuCNMiner.exe -xpool stratum+tcp://78.46.85.142:5223 -xwal <address> -xpsw x -di 01 -h 0 -dmem 1 -tt 80 -tstop 90 -cclock 1150 -mclock 1900 -allpools 1

If I use version, 11.0, 11.1, or 11.2, they run fine and get about 0.934 Kh/s
If I use version 11.3, the first GPU reports 0.934 but the second one ALWAYS reports 0.235 whether I reboot or run as admin

Even more interesting, all my other rigs with 5 of the same GPUs are ALL reporting about 0.934 per GPU as expected

Please let me know if you have experienced this and what you did to fix it.
I have tried reducing -h, turning off -dmem, lowering clocks, lowering mem, uninstalling Trixx, uninstalling GPU-z, uninstalling ASUS GPU, CCleaning system, reboots - all to no avail.

[4ward]

something has changed for Aeon between 11.2 and 11.3

same with the same options:

Code:

NsGpuCNMiner.exe -xpool stratum+tcp://mine.aeon-pool.com:5555 -xwal xxx -xpsw x -lite 1

11.2 correctly submits shares:

Code:

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.2            ║
╚════════════════════════════════════════════════════════════════╝

CryptoNight-Lite mining mode is enabled
AEO: 1 pool is specified
Main Aeon pool is mine.aeon-pool.com:5555
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 1
GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 480/580
POOL version
GPU #0 algorithm ASM, -h 2304, -dmem 1 (Memory used: 4722MB)
Total cards: 1
AEO: Stratum - connecting to 'mine.aeon-pool.com' <136.243.64.181> port 5555 (unsecure)
AEO: Stratum - Connected (mine.aeon-pool.com:5555) (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 4028

AEO: 04/05/18-15:35:02 - SHARE FOUND - (GPU 0; share value 0x0005b43a)
Share accepted (47 ms)!
AEO: 04/05/18-15:35:04 - SHARE FOUND - (GPU 0; share value 0x000555ec)
Share accepted (63 ms)!
AEO: 04/05/18-15:35:06 - SHARE FOUND - (GPU 0; share value 0x0005e479)
Share accepted (47 ms)!

11.3 all shares incorrect:

Code:

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

CryptoNight-Lite mining mode is enabled
AEO: 1 pool is specified
Main Aeon pool is mine.aeon-pool.com:5555
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 1
GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 480/580
POOL version
GPU #0 algorithm ASM, -h 2304, -dmem 1 (Memory used: 4722MB)
Total cards: 1
AEO: Stratum - connecting to 'mine.aeon-pool.com' <136.243.64.181> port 5555 (unsecure)
AEO: Stratum - Connected (mine.aeon-pool.com:5555) (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 4028

GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
GPU0 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.

"-dmem 0" or reducing -h doesn't help

[Littlegrand]

I have 2 asus rx 580s that about 70% of the time will report a dropped hashrate at either 60% or 90% lower than the others. I just keep turning those cards off and on until it corrects(num key). Once I get a normal hashrate, it stays that way unless miner reboots. It can take 20+ tries.

Not sure if its the same problem. Happens on Eth Claymore miner for me as well but never happened until 11.3 on CN.

***edit***
And also never started happening until Claymore 11.? on Eth, not sure if that means anything.  Was thinking of changing bios but haven't gotten around to it.

--J

[Nassim]

CaperVerde and Bonaire/Tobago not support now? Before hardfork i'm used version 9.7.
Claymore, add this adapters or add pow7 to 9.7 please.

Code:

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

AMD Cards available: 2
GPU #0: Capeverde (AMD Radeon R7 200 Series), 1024 MB available, 10 compute unit
s (pci bus 2:0:0)
GPU #1: Bonaire (AMD Radeon R7 200 Series), 2048 MB available, 14 compute units
(pci bus 3:0:0)
POOL version
No ASM binary found for GPU 0
No ASM binary found for GPU 1
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
GPU #1 algorithm ASM, -h 896, -dmem 0 (Memory used: 1836MB)
Total cards: 2

. . .

XMR - Total Speed: 0 H/s, Total Shares: 0(0+0), Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s

Yep, Capeverde GPU not supported with the latest version.
I don't think that is intended. a compile error maybe?

[Call_Me_Bambi]

Is there any option to mine Cryptonight Heavy algo (Haven, Stellite...), with this latest version?
Thank You for an answer...

Over on the Stellite thread there was a mention that "..the new claymore cryptonote miner with pow7 1 option works lovely..". It was mentioned in post #1521 over here.. https://bitcointalk.org/index.php?topic=2813261.1520. I'm going to give it a try and see what happens.

EDIT: Can confirm it works with Stellite, starting to earn coin as we speak.

[Littlegrand]

Im using it for Stellite and it does however Stellite is  Monero 7 and Haven is CN heavy which Claymore does not work with.

--J

[Claymore]

No CN-heavy, no old GPUs, sorry, I just don't have time for it.

something has changed for Aeon between 11.2 and 11.3

I did not check Aeon so I could break it when I added pow7. I will check and fix it when I have some time.

[ADoobie]

Im using it for Stellite and it does however Stellite is  Monero 7 and Haven is CN heavy which Claymore does not work with.

--J

Is there any option to mine Cryptonight Heavy algo (Haven, Stellite...), with this latest version?
Thank You for an answer...

Over on the Stellite thread there was a mention that "..the new claymore cryptonote miner with pow7 1 option works lovely..". It was mentioned in post #1521 over here.. https://bitcointalk.org/index.php?topic=2813261.1520. I'm going to give it a try and see what happens.

EDIT: Can confirm it works with Stellite, starting to earn coin as we speak.

I'm mining just fine on communitypool.stellite.cash

However, as of this morning, I can no longer connect to mineallcrypto.com - (edit: mineallcrypto is on the old chain, haven't updated to fork, do not mine there for stellite right now! It's behind and not producing real XTL)

[SRline]

Need CN-heavy!!! Please!

[Littlegrand]

@Claymore Is someone taking over your CryptoNote something you would consider?  Taking the dev fee out feels like your not going to support it any longer?

--J