Claymore's CryptoNote AMD GPU Miner v11.3

[dragonmike]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

If I try eg Nanopool, I get error "cannot convert blob data", shit hashrate and GPUs hanging in opencl...

Very weird.

Any ideas anyone?

[leonix007]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

If I try eg Nanopool, I get error "cannot convert blob data", shit hashrate and GPUs hanging in opencl...

Very weird.

Any ideas anyone?

What drivers are you using? Login.worker should be fine as long as you are using -allpools 1 options

blockchain drivers are recommended, are these errors solely on this miner? how about try other miners?

[dragonmike]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

If I try eg Nanopool, I get error "cannot convert blob data", shit hashrate and GPUs hanging in opencl...

Very weird.

Any ideas anyone?

What drivers are you using? Login.worker should be fine as long as you are using -allpools 1 options

blockchain drivers are recommended, are these errors solely on this miner? how about try other miners?

Using the latest Adrenalin 18.3.4 drivers.
Other miners work (using CastXMR at the moment - been using SRBminer too). Was just hoping I could extract more performance out of Claymore's miner... but that isn't so at all at the moment.

EDIT: could it be linked with "compute" mode not being forced? I have not installed Radeon Settings. Can I force compute mode using the miner (or another third party app)?

[leonix007]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

If I try eg Nanopool, I get error "cannot convert blob data", shit hashrate and GPUs hanging in opencl...

Very weird.

Any ideas anyone?

What drivers are you using? Login.worker should be fine as long as you are using -allpools 1 options

blockchain drivers are recommended, are these errors solely on this miner? how about try other miners?

Using the latest Adrenalin 18.3.4 drivers.
Other miners work (using CastXMR at the moment - been using SRBminer too). Was just hoping I could extract more performance out of Claymore's miner... but that isn't so at all at the moment.

EDIT: could it be linked with "compute" mode not being forced? I have not installed Radeon Settings. Can I force compute mode using the miner (or another third party app)?

Yep, a third party app would do

https://bitcointalk.org/index.php?topic=2815803.0

I am still using the old blockchain driver and as long as it hashes well, I don't need to change it

btw 18.3.4 seems useful on vega cards

https://bitcointalk.org/index.php?topic=3207439.0

[dragonmike]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

If I try eg Nanopool, I get error "cannot convert blob data", shit hashrate and GPUs hanging in opencl...

Very weird.

Any ideas anyone?

What drivers are you using? Login.worker should be fine as long as you are using -allpools 1 options

blockchain drivers are recommended, are these errors solely on this miner? how about try other miners?

Using the latest Adrenalin 18.3.4 drivers.
Other miners work (using CastXMR at the moment - been using SRBminer too). Was just hoping I could extract more performance out of Claymore's miner... but that isn't so at all at the moment.

EDIT: could it be linked with "compute" mode not being forced? I have not installed Radeon Settings. Can I force compute mode using the miner (or another third party app)?

Yep, a third party app would do

https://bitcointalk.org/index.php?topic=2815803.0

I am still using the old blockchain driver and as long as it hashes well, I don't need to change it

btw 18.3.4 seems useful on vega cards

https://bitcointalk.org/index.php?topic=3207439.0

As a matter of fact there's no need for a third party app. I've added a DWORD in registry for the cards and hashrates in CastXMR have gone up by over 10%. I am assuming this would solve the problems I was having with Claymore. I'll test it later when I get some time.

[leonix007]

As a matter of fact there's no need for a third party app. I've added a DWORD in registry for the cards and hashrates in CastXMR have gone up by over 10%. I am assuming this would solve the problems I was having with Claymore. I'll test it later when I get some time.

Oh yeah, that also should do it.

Posting it here for sharing

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"KMD_EnableInternalLargePage"=dword:00000002

Keep us posted if it solved your issue bro

BR

[Call_Me_Bambi]

Having some issues with the latest version and my RX570's...

"Pools that require "Login.Worker" instead of wallet address are not supported directly currently"  - so I assume that's why I'm getting rejected if I try to mine on miningpoolhub?

I think that must be a hangover from some previous version of Claymore and has not been updated as I can happily mine at MiningPoolHub, which uses "Login.Worker", and without using the "-allpools 1" option. Here is the config I use and it works fine.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal MyLogin.MyWorker -xpsw x -pow7 1 -ftime 5 -mport 0 -r 1

[bulgar73]

Anyone can point me to a pool with decent hashrate .

https://www.cryptunit.com/

select coin, press MORE.... list of pools you see


----
BTC

 

[Santunes]

HI everybody i am having a issue on my Claymore config.

I am minning on Nanopool to a Coinpayments wallet.

My start is:
NsGpuCNMiner.exe -xpool stratum+ssl://xmr-eu1.nanopool.org:14433 -xwal wallet-adress.paymentID.rig_name/my@email -xpsw x -pow7 1

I have 6 RX570n and driver 17.11.1 with all cards in compute mode, it claymore ethereum is working properly

Any one has an idea of what this is ?

My command line output is:
╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 6 pools are specified
Main Monero pool is xmr-eu1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0)
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 6:0:0)
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #5 recognized as Radeon RX 470/570
POOL version
GPU #0 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #1 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #2 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #3 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #4 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #5 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
Total cards: 6
XMR: Stratum - connecting to 'xmr-eu1.nanopool.org' <217.182.169.148> port 14433 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu1.nanopool.org:14433) (SSL/TLS)
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
XMR: 04/20/18-22:40:47 - New job from xmr-eu1.nanopool.org:14433
XMR - Total Speed: 3002 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 749 H/s, GPU2 755 H/s, GPU3 752 H/s, GPU4 746 H/s, GPU5 0 H/s
XMR: 04/20/18-22:40:53 - SHARE FOUND - (GPU 2; share value 0x000034c0)
Share accepted (78 ms)!
GPU0 t=44C fan=0%, GPU1 t=51C fan=0%, GPU2 t=53C fan=21%, GPU3 t=51C fan=26%, GPU4 t=52C fan=0%, GPU5 t=45C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

[leonix007]

HI everybody i am having a issue on my Claymore config.

I am minning on Nanopool to a Coinpayments wallet.

My start is:
NsGpuCNMiner.exe -xpool stratum+ssl://xmr-eu1.nanopool.org:14433 -xwal wallet-adress.paymentID.rig_name/my@email -xpsw x -pow7 1

I have 6 RX570n and driver 17.11.1 with all cards in compute mode, it claymore ethereum is working properly

Any one has an idea of what this is ?

My command line output is:
╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 6 pools are specified
Main Monero pool is xmr-eu1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0)
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 6:0:0)
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #5 recognized as Radeon RX 470/570
POOL version
GPU #0 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #1 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #2 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #3 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #4 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #5 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
Total cards: 6
XMR: Stratum - connecting to 'xmr-eu1.nanopool.org' <217.182.169.148> port 14433 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu1.nanopool.org:14433) (SSL/TLS)
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
XMR: 04/20/18-22:40:47 - New job from xmr-eu1.nanopool.org:14433
XMR - Total Speed: 3002 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 749 H/s, GPU2 755 H/s, GPU3 752 H/s, GPU4 746 H/s, GPU5 0 H/s
XMR: 04/20/18-22:40:53 - SHARE FOUND - (GPU 2; share value 0x000034c0)
Share accepted (78 ms)!
GPU0 t=44C fan=0%, GPU1 t=51C fan=0%, GPU2 t=53C fan=21%, GPU3 t=51C fan=26%, GPU4 t=52C fan=0%, GPU5 t=45C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

try to use -dmem 0

if still persist, reduce your -h value and check your OC settings, XMR has different clocks config over Eth

[New_Jerusalem]

I get error "cannot convert blob data", how to fix that?

Maybe specify: -pow7 1

[fanisk21]

HI everybody i am having a issue on my Claymore config.

I am minning on Nanopool to a Coinpayments wallet.

My start is:
NsGpuCNMiner.exe -xpool stratum+ssl://xmr-eu1.nanopool.org:14433 -xwal wallet-adress.paymentID.rig_name/my@email -xpsw x -pow7 1

I have 6 RX570n and driver 17.11.1 with all cards in compute mode, it claymore ethereum is working properly

Any one has an idea of what this is ?

My command line output is:
╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 6 pools are specified
Main Monero pool is xmr-eu1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0)
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 6:0:0)
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #5 recognized as Radeon RX 470/570
POOL version
GPU #0 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #1 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #2 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #3 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #4 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #5 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
Total cards: 6
XMR: Stratum - connecting to 'xmr-eu1.nanopool.org' <217.182.169.148> port 14433 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu1.nanopool.org:14433) (SSL/TLS)
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
XMR: 04/20/18-22:40:47 - New job from xmr-eu1.nanopool.org:14433
XMR - Total Speed: 3002 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 749 H/s, GPU2 755 H/s, GPU3 752 H/s, GPU4 746 H/s, GPU5 0 H/s
XMR: 04/20/18-22:40:53 - SHARE FOUND - (GPU 2; share value 0x000034c0)
Share accepted (78 ms)!
GPU0 t=44C fan=0%, GPU1 t=51C fan=0%, GPU2 t=53C fan=21%, GPU3 t=51C fan=26%, GPU4 t=52C fan=0%, GPU5 t=45C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

try to use -dmem 0

if still persist, reduce your -h value and check your OC settings, XMR has different clocks config over Eth

Are you using Windows?

Increase virtual memory to 48000MB since you have 6*8GB graphics

[Santunes]

Thanks for there reply!
My rx570 are 4 gb version.

I am testing other miners to see how they keep stable.
Best regards.

[MiningHelp.me]

try to use -dmem 0

-dmem 0
don't helps with old cards

[sf_flash]

In version 10.2 was added share checking by CPU, but if CPU fails - miner drops this share. With this these shares can be correct. How can I disable this CPU share check? (readme nothing said about)

[dragonmike]

As a matter of fact there's no need for a third party app. I've added a DWORD in registry for the cards and hashrates in CastXMR have gone up by over 10%. I am assuming this would solve the problems I was having with Claymore. I'll test it later when I get some time.

Oh yeah, that also should do it.

Posting it here for sharing

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"KMD_EnableInternalLargePage"=dword:00000002

Keep us posted if it solved your issue bro

BR

I can confirm that adding the DWORD in registry to enable compute mode works. Solves the weird output and enables full hashrate as expected.

[MaxMidnite]

We need another update, intense coin forked.
Plus we need the additional tweaks..thank you

[modfyd]

Hi all, need some help, switching to mining SUMO on my rig, and i can't find the flag settings for Cryptonight Heavy.  Mining cryptonightv7 now.

anyone know the settings?

[fanisk21]

"cryptonight_type" : "heavy",

[modfyd]

"cryptonight_type" : "heavy",

Oops forgot to mention I'm using ethos.