KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2435 blocks

[BSGMiner]

Block by Fuzzy,2 h ago!

This is our 1st October Block,and our 1st of Block Monday!

Whoa, October! Keep those hardhats on nice and tight, folks...

Here we GOOOOOoOooooo!!!

P.S. - Congrats, Fuzzy!

[1714285720]

1714285720

[1714285720]

1714285720

[rifleman74]

As some of you know, I've been tracking invalid rates with my Avalons.  They were about double my S9s when I was running (5) per string (20 per controller).  That came back on the high end of normal when I reduced it to (3) per string.  I'm happy to report that (4) per string runs just as well as (3).  Apparently only (5) causes the problem.

This really helps spread out the cost of controllers and AUC3s, reducing their overhead substantially.

Yeah I think that's what kano-san was telling us, getting that 5th or higher on the chain really can mess up the invalids. 

[andrewa44]

this may make it easy:

543272   2018-Sep-27 08:22   12.45837645   35.812T   207hr 14m 32s   206.16PHs   0.09%   31.828G   183.23THs   0.01107239
543172   2018-Sep-26 14:18   12.55768480   35.763T   207hr 56m 29s   205.19PHs   0.09%   31.689G   181.82THs   0.01112725
542713   2018-Sep-23 16:23   12.41669382   35.819T   217hr 11m 49s   196.75PHs   0.09%   32.595G   179.04THs   0.01129887
542525   2018-Sep-22 11:03   12.41692607   35.898T   217hr 41m 50s   196.73PHs   0.09%   32.659G   178.98THs   0.01129670
542434   2018-Sep-21 20:03   12.69758809   35.788T   217hr 42m 22s   196.12PHs   0.09%   32.654G   178.95THs   0.01158567
542394   2018-Sep-21 14:16   12.78682930   35.787T   217hr 50m 32s   195.99PHs   0.09%   32.680G   178.97THs   0.01167651
542174   2018-Sep-20 01:55   12.48917435   35.205T   214hr 8m 39s   196.14PHs   0.09%   32.100G   178.84THs   0.01138752

pardon me, but why for some blocks "Miner Reward" is less than 12.5? is it pool fee?

Yep, I charge a massive 0.9% of the total
(as it says on Help->Payouts)

"Massive 0.9%"

lel 

[MoparMiningLLC]

on a total side subject can anyone tell me how to create a signature here? I see people with them, I have looked thru the profile settings and I must be blind because I do not see it. Let me rephrase - I see it in my profile, but I see no way to edit it.

rather than derail this thread, can send me a pm as well.

now, let's get more blocks!

[NotFuzzyWarm]

on a total side subject can anyone tell me how to create a signature here? I see people with them, I have looked thru the profile settings and I must be blind because I do not see it. Let me rephrase - I see it in my profile, but I see no way to edit it.

rather than derail this thread, can send me a pm as well.

now, let's get more blocks!

You need more rank. ref https://bitcointalk.org/index.php?topic=1689727.0
Mine on! I got the 1st block for us this month, time for you slackers to pick it up!
(JK of course)

[MoparMiningLLC]

You need more rank. ref https://bitcointalk.org/index.php?topic=1689727.0
Mine on! I got the 1st block for us this month, time for you slackers to pick it up!
(JK of course)

ahh ok, makes sense, I cannot see it because it does not yet exist for me. works for me. it actually states that newbie are allowed 50 characters. I cannot edit mine at all hmm..

[trev59]

@NotFuzzyWarm   Thx for the block

[clgrissom3]

You need more rank. ref https://bitcointalk.org/index.php?topic=1689727.0
Mine on! I got the 1st block for us this month, time for you slackers to pick it up!
(JK of course)

ahh ok, makes sense, I cannot see it because it does not yet exist for me. works for me. it actually states that newbie are allowed 50 characters. I cannot edit mine at all hmm..

To see if it works for you, click on "Profile" at the top of the page, then click on "Forum Profile Information".  You should see an empty box to the right of "Signature:" if you are allowed to do anything with it and just type what you want in that box.

[Apprentice]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

[MoparMiningLLC]

To see if it works for you, click on "Profile" at the top of the page, then click on "Forum Profile Information".  You should see an empty box to the right of "Signature:" if you are allowed to do anything with it and just type what you want in that box.

correct, I can get to that point but it will not let me edit the box - per the forum rules page:

- Newbie: No styling (including links) allowed. Max 50 characters.
- Jr. Member: No links allowed. Max 150 characters.
- Member: Unlimited length.
- Full: Color allowed.
- Sr. Member: Size allowed
- Hero: Background color allowed

so as a newbie, I should be allowed the 50 characters - I am almost to the Jr. Member level so I will just have to wait to see if it lets me at that point.

[Steamtyme]

Mine on! I got the 1st block for us this month, time for you slackers to pick it up!
(JK of course)

Thank you good sir. I did yell at my machines for a good 20 minutes when I got home, for their slacker attitudes. No guarantees but they looked scared

[rifleman74]

on a total side subject can anyone tell me how to create a signature here? I see people with them, I have looked thru the profile settings and I must be blind because I do not see it. Let me rephrase - I see it in my profile, but I see no way to edit it.

rather than derail this thread, can send me a pm as well.

now, let's get more blocks!

You need more rank. ref https://bitcointalk.org/index.php?topic=1689727.0
Mine on! I got the 1st block for us this month, time for you slackers to pick it up!
(JK of course)

Thank you sir, may I have another?


MINE ON WITH KANO-SAN!

[FatnSlo]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

I would like to know more about this. When the S9i came out I thought I read about a few people who had tried to run the S9i firmware on an S9 and it was said not work. How many S9's have you done this to? Which firmware are you using exactly (S9i or S9j)? What method did you use to upgrade the firmware?

[kano]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

I would like to know more about this. When the S9i came out I thought I read about a few people who had tried to run the S9i firmware on an S9 and it was said not work. How many S9's have you done this to? Which firmware are you using exactly (S9i or S9j)? What method did you use to upgrade the firmware?

You still mining at slush where they make crappy empty blocks every once in a while - or did you switch to here?

[Apprentice]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

I would like to know more about this. When the S9i came out I thought I read about a few people who had tried to run the S9i firmware on an S9 and it was said not work. How many S9's have you done this to? Which firmware are you using exactly (S9i or S9j)? What method did you use to upgrade the firmware?

Download the firmware from bitmain
Flash

That's it. Both S9i and S9j work fine on S9 13.5T and 14T. Have 11 units. Am running S9j on all.

You can try from the SD card for testing instead of flashing.

[FatnSlo]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

I would like to know more about this. When the S9i came out I thought I read about a few people who had tried to run the S9i firmware on an S9 and it was said not work. How many S9's have you done this to? Which firmware are you using exactly (S9i or S9j)? What method did you use to upgrade the firmware?

You still mining at slush where they make crappy empty blocks every once in a while - or did you switch to here?

I am thinking about moving to your pool. I have 763.5TH. But without reading through this entire thread, can you tell me if there is anyway that your pool can notify me if a worker has stopped working or is hashing at a low rate via email or phone app?

[clgrissom3]

Of topic but wanna mention that S9i and S9j works well on S9.
Did flash all my S9 and working great since. Less power, less chip heat....however they sometimes make a low pitch noise because of thr fans running slower.

I would like to know more about this. When the S9i came out I thought I read about a few people who had tried to run the S9i firmware on an S9 and it was said not work. How many S9's have you done this to? Which firmware are you using exactly (S9i or S9j)? What method did you use to upgrade the firmware?

You still mining at slush where they make crappy empty blocks every once in a while - or did you switch to here?

I am thinking about moving to your pool. I have 763.5TH. But without reading through this entire thread, can you tell me if there is anyway that your pool can notify me if a worker has stopped working or is hashing at a low rate via email or phone app?

I currently get 3 notices when one of my miners drops below the hashrate I set; a push notice from the Apple app to my iphone; a text message to my phone from zachmonroe web site, and an email from the zachmonroe website (this where you can set the minimum hashrate for each miner).  I understand that the minergain web site does the same thing and although I have never tried the android app, I hear it also sends out these notices as well.

Apple App (find on the Apple App Store):
https://bitcointalk.org/index.php?topic=1344360.0

Android App, read in the thread here:
https://bitcointalk.org/index.php?topic=789369.msg11091187#msg11091187

For miner monitoring (Zach Monroe Web site):
https://ckpoolmonitor.zachmonroe.com/
https://bitcointalk.org/index.php?topic=1331875.0

For miner monitoring (minergain Web site):
https://www.minergain.com/

These apps also send block find notices to my phone but the fastest way to get those is to sign up for a Discord account and install the Discord app on your smart phone.  The Block Bot notifier is really fast!
https://discord.gg/yMnjF35

Discord has also become the best way to get info and/or ask questions about the KanoPool.

[MoparMiningLLC]

Apple App (find on the Apple App Store):
https://bitcointalk.org/index.php?topic=1344360.0

This ^^^ thank you! I did not know there was an app - I had created an "app" by adding the webpage to my iPhone screen - this requires me to log in each time though if enough time passes.

The only thing I notice about it is that it states last payout was 9/27 when the last one was actually today. It references the block from 9/27 correctly it is just missing the three block payments after that.

I also use awesome miner but I have yet to be able to get that to work off my network, so this is nice to verify that my miners are still working.

[kano]

Yeah that info is listed in the first post here on the thread.

It's worth reading the first post if you don't keep up with the rest of the posts, since it includes some of the main details about the pool.

[MoparMiningLLC]

Yeah that info is listed in the first post here on the thread.

It's worth reading the first post if you don't keep up with the rest of the posts, since it includes some of the main details about the pool.

I did read it, there is a lot of info there and I missed it when someone quoted it again above, I was happy to see it as I read the post originally months ago.