wmabern
|
|
February 26, 2017, 04:34:53 PM |
|
.... I hesitate to call the loss of fan control and the easy changing of frequencies an upgrade....
Changing freq on older rigs with 2.0 hasn't changed, it's just hidden... It's still at h ttp://your_rig's_IP_here/cgi-bin/minerAdvanced.cgi Very interesting. It DOES take you to a frequency control page. However, when I decided to bump one of miners from 550 to 575, it popped up a warning saying it would take 3 hours to search frequencies before it starts mining. I decided, No. Thanks for the tip anyway. I've done it loads of times, it doesn't take 3 hours. Thank you for the info! So it may take about the same length of time it takes for an initial flash from older FW to the Auto-tune? About an hour for me. Another question please, will it allow a frequency change to 575Mhz or any other freq that is not 550,600, or 650? I know it shows that it available along with the normal large range of frequencies as were seen in the older no auto-tune FW. Just wondering if it might have a hard time settling in at one of the freqs. that is not 550, 600, 650. Thank you for any further info you can provide!!
|
BITMIXER.IO Gone Baby, Gone.. ;-) Not any good sig campaigns out there that I want!
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
February 26, 2017, 04:52:16 PM |
|
Block by danbel79! This is your 5th Kano block and our 1st of the day!
|
|
|
|
wmabern
|
|
February 26, 2017, 04:53:09 PM Last edit: February 26, 2017, 05:06:09 PM by wmabern |
|
Block by danbe179!
Nice!! Two more blocks to go! ;->
|
BITMIXER.IO Gone Baby, Gone.. ;-) Not any good sig campaigns out there that I want!
|
|
|
flminer
|
|
February 26, 2017, 05:21:30 PM |
|
gotta like seeing new blocks!!!!
|
|
|
|
ComputerGenie
|
|
February 26, 2017, 05:25:42 PM |
|
... Just wondering if it might have a hard time settling in at one of the freqs. that is not 550, 600, 650. Thank you for any further info you can provide!! With the exception of newer rigs (which have freq set per chip), if it's on the dropdown list, then you can use it. That being said, "working" differs from board to board and rig to rig (just like any other computer freq change).
|
If you have to ask "why?", you wouldn`t understand my answer. Always be on the look out, because you never know when you'll be stalked by hit-men that eat nothing but cream cheese....
|
|
|
wmabern
|
|
February 26, 2017, 05:49:05 PM |
|
|
BITMIXER.IO Gone Baby, Gone.. ;-) Not any good sig campaigns out there that I want!
|
|
|
wmabern
|
|
February 26, 2017, 06:38:51 PM Last edit: February 26, 2017, 07:21:33 PM by wmabern |
|
I've done it loads of times, it doesn't take 3 hours.
Ah, what the hell. I just got into the miner with the appropriate URl and bumped the freq. from 500 to 575Mhz and see how it handles the temps. Since it is a rated 550Mhz miner by BM, I don't want to take too high. I'll repost back after it has finished. Almost four minutes and counting, EDIT: DAMN!!! It came back in about five minutes. Much faster than I imagined. That will definitely be the way I change freqs. in the future without having to re-flash again!! Great tip and info!!!! +2 Feeling brave! 575Mhz was running fine with no temp issues, so I just bumped again to 600Mhz. That means all four S9's will be hashing at 600 when/if it comes back!!!
|
BITMIXER.IO Gone Baby, Gone.. ;-) Not any good sig campaigns out there that I want!
|
|
|
o_solo_miner
Legendary
Offline
Activity: 2483
Merit: 1482
-> morgen, ist heute, schon gestern <-
|
|
February 26, 2017, 06:42:10 PM |
|
nice to see 28 PH and all back to green! That is the best colour for all.
|
from the creator of CGMiner http://solo.ckpool.org for Solominers paused: passthrough for solo.ckpool.org => stratum+tcp://rfpool.org:3334
|
|
|
wmabern
|
|
February 26, 2017, 07:27:05 PM Last edit: February 26, 2017, 08:08:18 PM by wmabern |
|
|
BITMIXER.IO Gone Baby, Gone.. ;-) Not any good sig campaigns out there that I want!
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
February 27, 2017, 02:30:31 AM |
|
Block by cobramining! This is your 20th Kano block and our 1st of the new day!
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 27, 2017, 02:40:19 AM |
|
Block by cobramining! This is your 20th Kano block and our 1st of the new day! A7v1
|
|
|
|
danbel79
Newbie
Offline
Activity: 14
Merit: 2
|
|
February 27, 2017, 02:47:07 AM |
|
S9v1
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 27, 2017, 02:47:48 AM Last edit: February 27, 2017, 03:08:57 AM by kano |
|
... and followed up by a passthru reconnect (Edit: 10mins after the block) Everyone on the main pool failed over and reconnected. All the nodes were unaffected DE,SG,JP,NL,NYA
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 27, 2017, 02:54:25 AM |
|
S9v1
Yep I was asleep for that one
|
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
February 27, 2017, 03:04:58 AM |
|
... and followed up by a passthru reconnect Everyone on the main pool failed over and reconnected. All the nodes were unaffected DE,SG,JP,NL,NYA I was wondering why my equipment failed over...but they all came back within a few minutes so all is well in the universe!
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 27, 2017, 03:07:31 AM |
|
... and followed up by a passthru reconnect Everyone on the main pool failed over and reconnected. All the nodes were unaffected DE,SG,JP,NL,NYA I was wondering why my equipment failed over...but they all came back within a few minutes so all is well in the universe! Yeah it was 10min after the block. But as I mentioned the other day, the reconnects are a straight failover then a reconnect.
|
|
|
|
xxcsu
|
|
February 27, 2017, 07:13:53 AM |
|
S9v1
Yep I was asleep for that one Good to know im not the only one who find a block here on kano with S9v1 looks like all those "bad" miners still able to find blocks
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 27, 2017, 07:37:58 AM |
|
S9v1
Yep I was asleep for that one Good to know im not the only one who find a block here on kano with S9v1 looks like all those "bad" miners still able to find blocks There's no doubt they find blocks, they've found 95 so far. The issue is the total number S9v1 has found is well below what it should have - CDF[Erl] = 0.991261 with that last one. (They're expected to have found almost 25 more)
|
|
|
|
flminer
|
|
February 27, 2017, 08:37:53 AM |
|
AWESOME starting Monday with a block! WTG Cobramining!!!
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
February 27, 2017, 03:06:56 PM |
|
S9v1
Yep I was asleep for that one Good to know im not the only one who find a block here on kano with S9v1 looks like all those "bad" miners still able to find blocks There's no doubt they find blocks, they've found 95 so far. The issue is the total number S9v1 has found is well below what it should have - CDF[Erl] = 0.991261 with that last one. (They're expected to have found almost 25 more) Yes but most jumped ship during the red months. That's how leaving a pool during slow times can damn near ruin it. Had all those machines stayed they could have hit those blocks. it's almost as bad as a block withholding attack. I know it's no guarantee and hell what's everyone gonna think when we hit the 1:10000 year block. 20000% or more. Yes that's possible. Rare but will happen eventually as long as Bitcoin survives. BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
|