KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2436 blocks

[MinerSRQ]

DONATED.  You should have it now.

Thanks to both of you for " Paying it Forward"  FYI thats the reason you get the coupon.. :-)

No need to get screenshots of the purchase, we belive you..  just get the serial number, MAC address, Firmware revision, file build date. and a DNA sample and we should all be good..  No need to go to the effort of the screen shot :-)

Hey, I said there would be a screenshot so there will be a screenshot.  

It was just for transparency reasons so everyone else can see how great this pool is.

So.....here are the coupons I received and the S7 is getting packed up to go out in about an hour. Thanks everyone!!! As soon as my BCH arrives, I will be completing the purchase.



DNA sample submitted...    Love you guys!

[1715665052]

1715665052

[1715665052]

1715665052

[Brickman67]

Who are you guys using for shipping the S9's? UPS - DHL - Fedex
I have used UPS going to Michigan and my god the fees... customs crap, etc.

Have read about DHL and have heard positive things but when you select them on bitmain they say it could be a longer period for shipping.. is that true.

Any input would be helpful, appreciate the time and help... and the Great Pool!

Brickman

[Shazam!!!]

Who are you guys using for shipping the S9's? UPS - DHL - Fedex
I have used UPS going to Michigan and my god the fees... customs crap, etc.

Have read about DHL and have heard positive things but when you select them on bitmain they say it could be a longer period for shipping.. is that true.

Any input would be helpful, appreciate the time and help... and the Great Pool!

Brickman

WhatsMiner shipped my miners with DHL. Everything was smooth. From China to Michigan in under 48hrs. Can't imagine why it'd be
different for Bitmain to do the same.

[kano]

Sorry, need help.

I tried to reset my kano pool password and got logged out, when retry, the site shown "Too many failures, come back later".

I also tried using the RESET PASSWORD option at the bottom of the login page. It says " If you enter the details correctly,
an Email will be sent to you to let you reset your password".

But till now I have not receive any email. I also checked the spam/junk folder.

Please advise.

Thank you.

username: ....

If you get banned (... too many ...) nothing works.
I've cleared your ban ... try again.

The ban was from mistyping your username.
Check your miner for the correct upper/lower case and what you typed when you created it

[nazzer]

Ah, it’s one of those rare days I wake up without a block from Kano pool...

Maybe it’s my turn on the acclaim board soon

DANCE ON!

[Shazam!!!]

Ah, it’s one of those rare days I wake up without a block from Kano pool...

Maybe it’s my turn on the acclaim board soon

DANCE ON!

It's still Tuesday here......we've got time!!! Hahaha!!!

[stelee68]

Sorry, need help.

I tried to reset my kano pool password and got logged out, when retry, the site shown "Too many failures, come back later".

I also tried using the RESET PASSWORD option at the bottom of the login page. It says " If you enter the details correctly,
an Email will be sent to you to let you reset your password".

But till now I have not receive any email. I also checked the spam/junk folder.

Please advise.

Thank you.

username: ....

If you get banned (... too many ...) nothing works.
I've cleared your ban ... try again.

The ban was from mistyping your username.
Check your miner for the correct upper/lower case and what you typed when you created it

Thank you so much for your help, Kano San!

I really appreciated your patience and prompt actions, Great support!

[Brickman67]

Who are you guys using for shipping the S9's? UPS - DHL - Fedex
I have used UPS going to Michigan and my god the fees... customs crap, etc.

Have read about DHL and have heard positive things but when you select them on bitmain they say it could be a longer period for shipping.. is that true.

Any input would be helpful, appreciate the time and help... and the Great Pool!

Brickman

WhatsMiner shipped my miners with DHL. Everything was smooth. From China to Michigan in under 48hrs. Can't imagine why it'd be
different for Bitmain to do the same.

Thanks, did you give DHL your Tax Id# or SS# before they shipped, just curious how smooth customs was.... obviously it was smooth .. Lastly, is it better to import as a company or individual...any cost reduction to favor one over the other..

[ccgllc]

Who are you guys using for shipping the S9's? UPS - DHL - Fedex
I have used UPS going to Michigan and my god the fees... customs crap, etc.

Have read about DHL and have heard positive things but when you select them on bitmain they say it could be a longer period for shipping.. is that true.

Any input would be helpful, appreciate the time and help... and the Great Pool!

Brickman

I use Fed-Ex exclusively now when working with Bitmain.  They are less expensive than UPS and now that I'm on file with them, I've never had a customs issue.  They also charge me less in customs fees than UPS (and then, somewhat randomly on orders under $2500).

I also found things I ordered with Fed-ex came upwards of a MONTH before things I ordered via UPS.  I have no idea why, but it happened on at least 3 orders.  Has not happened recently though - but the lead times are a lot shorter now.

[AerialGopher]

I agree DHL only ever charged me 14 dollars fee plus taxes 5% on the Canadian equivalent of the purchase price.  They never did charge Duty for some reason.  DHL shipping has always been 2 - 3 days for me.

I only had to go into the customs office to self clear a shipment that was over 2500 cnd. ( the A3 )  but I could of let DHL deal with it, but I think when they do for the high value shipment they charge a good penny for brokerage.   SO just make separate orders to keep the value below 2500.

Yup, 2 or 3 days,  makes a stop at the hub in Cincinnati the to Canada.

DHL shipping did not require SSN or anyhtign funny to ship with them

[qrnode]

Who are you guys using for shipping the S9's? UPS - DHL - Fedex
I have used UPS going to Michigan and my god the fees... customs crap, etc.

Have read about DHL and have heard positive things but when you select them on bitmain they say it could be a longer period for shipping.. is that true.

Any input would be helpful, appreciate the time and help... and the Great Pool!

Brickman

I am in the US and have used DHL many times. Very fast delivery 2-3 days and the packages are always in very good condition. I have never had to pay any additional fees upon delivery.

[Brickman67]

Great replies, great pool.

As they Say: "Mine On"

[Rnmack]

I hooked up all of my miners but they are not showing up on my workers tab.  Im not sure why, or if I did something wrong during registration.
How can I contact someone for help with the site?

[kano]

As the title (and first post) now shows - I've added back an SG node for mining in Singapore
I've also added an alias of us.kano.is to point to stratum.kano.is in case anyone tries to mine to us.kano.is
Mine on!

[kano]

I hooked up all of my miners but they are not showing up on my workers tab.  Im not sure why, or if I did something wrong during registration.
How can I contact someone for help with the site?

Registration only affects if you can login to the web site.

If your miners aren't showing up, check the miners themselves.
If they show dead on any pools in the status page, then it will be one of:
1) spaces in the pool settings
2) username on the front of the workername doesn't exactly match your login username - they're case sensitive
3) spaces on the front of the workername
4) set the password to 'x' coz blank usually doesn't work

[chauski01]

As the title (and first post) now shows - I've added back an SG node for mining in Singapore
I've also added an alias of us.kano.is to point to stratum.kano.is in case anyone tries to mine to us.kano.is
Mine on!

Hi Kano-san, thanks for updating the info.  Did you intentionally disable ping to "sg.kano.is"?  When i try to ping, it gives me a timeout but nonetheless, tracetcp to port 3333 gives me 40ms which still looks very good compared to jp which is 50ms for me!  Awesome!  Will give the SG a try, but just wanted to give you heads up that icmp for sg node is blocked... or if you intentionally did this, no worries.  Just checking out as to some might not know how to confirm connection.

[Rnmack]

they  are showing alive.  password is x, but when i go to the site and sign in, the GH/S rate in top right corner is 0, my userne is not showing up in the worker list, on the worker shift graph, shows no workers.

I configured  the miner as per instructions, using my username.  I just want to make sure work is being counted and I will be paid.  I dont have all 50 on line yet, still waiting on the remainder to arrive.  I just want to get the first ones running correctly.

[nazzer]

As the title (and first post) now shows - I've added back an SG node for mining in Singapore
I've also added an alias of us.kano.is to point to stratum.kano.is in case anyone tries to mine to us.kano.is
Mine on!

Thanks for this - I’ll start moving miners over to SG and backup to JP

[kano]

As the title (and first post) now shows - I've added back an SG node for mining in Singapore
I've also added an alias of us.kano.is to point to stratum.kano.is in case anyone tries to mine to us.kano.is
Mine on!

Hi Kano-san, thanks for updating the info.  Did you intentionally disable ping to "sg.kano.is"?  When i try to ping, it gives me a timeout but nonetheless, tracetcp to port 3333 gives me 40ms which still looks very good compared to jp which is 50ms for me!  Awesome!  Will give the SG a try, but just wanted to give you heads up that icmp for sg node is blocked... or if you intentionally did this, no worries.  Just checking out as to some might not know how to confirm connection.

Yeah you can't ping them - there's nothing I can do about it either.
AWS LightSail doesn't have the option to enable ICMP
Yeah this is AWS so hopefully way more reliable than the old SG server that I got rid of due to having problems with it 3 days in a row back in Jan

However, going via SG is not ideal if you are close to another node.
In your case - only being 10ms difference, use JP first.

[NotFuzzyWarm]

they  are showing alive.  password is x, but when i go to the site and sign in, the GH/S rate in top right corner is 0, my userne is not showing up in the worker list, on the worker shift graph, shows no workers.

I configured  the miner as per instructions, using my username.  I just want to make sure work is being counted and I will be paid.  I dont have all 50 on line yet, still waiting on the remainder to arrive.  I just want to get the first ones running correctly.

For miner names are they all pointed to 1 user name or are they given suffix's as well to identify the miners? All one name works but just gives a total hash rate of them.

example, I use:
Fuzzy.Ant71s9b23
Fuzzy.A741_1
Fuzzy.A821_1
etc to see the stats for each miner. All payout to the 1 Fuzzy user name address.