[CLOSED] ASICMiner Prisma 1.4th/s - 1.47 BTC

[GrapeApe]

I don't know if anyone has seen this yet.

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

[1713557389]

1713557389

[1713557389]

1713557389

[1713557389]

1713557389

[CrazyGuy]

I don't know if anyone has seen this yet.

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

Yes, it's been out there for a couple weeks but they've made updates as recent as yesterday. I'm waiting on a final word from AM to signal it's ready before I release an image to my customers. I've already successfully built it on an RPi and added drop downs for AM and RM forks in Minera, along with methods to update and rebuild both binaries.

The good news about AM modifications is they've added a seperate customized BE driver, which should make it easier to integrate into the official cgminer branch and avoid messing up other devices.

[GrapeApe]

Even more good news.

Should have known you were already on it.

Thanks for going the extra mile here.

[TracerX]

Thanks for going the extra mile here.

++

[firewire2013]

Wish someone would sell these in the UK...

Would have at least 2, these will certainly ROI

[testh]

I've received a photo of the adapter that has been created for connecting to a RPi. The interface is USB, so that's good news.

https://i.imgur.com/S2sr0zcl.png

I will ship overseas, but I can not estimate a price as I don't have package dimensions. The weight will be somewhere around 8kg.

where I can buy it?  and what is name/model? thanks

[CrazyGuy]

Which product are you referencing?

[CrazyGuy]

RPi image is complete. I've added Rockminer and ASICMiner forks to the default image. I have to say, I'm very impressed with the Minera interface.


Dashboard with one New Rbox attached.




Full terminal access from within the web interface. How cool is that?




Historical charts




Rockminer and ASICMiner forks added to list of supported miners




Also, I've tested the rbox on ASICMiners fork(4.6.0) and it appears to work just as well. So you should be able to run a Prisma, Tube and any Rockminer device, all in the same instance.

[ManeBjorn]

Nice work as usual.
Do you have a link you could send me for the image I can test it out?

RPi image is complete. I've added Rockminer and ASICMiner forks to the default image. I have to say, I'm very impressed with the Minera interface.


Dashboard with one New Rbox attached.




Full terminal access from within the web interface. How cool is that?




Historical charts




Rockminer and ASICMiner forks added to list of supported miners




Also, I've tested the rbox on ASICMiners fork(4.6.0) and it appears to work just as well. So you should be able to run a Prisma, Tube and any Rockminer device, all in the same instance.

[cesarm]

No signs of shipment from Friedcat yet ?

[Xtra7973]

Ok im in for two. I have been following philipma1957 and I bought a couple S3's because of his advice, also I tried gaw/zen because of him. I want out of gaw and want to own all my own hardware and this looks like a great deal. Thank you so much philipma1957 for getting me into this and thank you CrazyGuy for doing this group buy. And also putting up with my noob questions for my first group buy. Please let me know what else is expected of me to finish this deal. Thank you.

Here is the blockchain info https://blockchain.info/tx/06c2db2cab4ea172539004674c5802c0ae71fb5dee9c5198a6fe0263588836af

[CrazyGuy]

No signs of shipment from Friedcat yet ?

ASICMiner says our batch 1 order was the first shipment to go out. Batch 2 and 3 are scheduled to ship on the 16th.

[Subw]

CrazyGuy please make prismas's package box photos when received

[ferncreekminer]

I've received a photo of the adapter that has been created for connecting to a RPi. The interface is USB, so that's good news.

https://i.imgur.com/S2sr0zcl.png

I will ship overseas, but I can not estimate a price as I don't have package dimensions. The weight will be somewhere around 8kg.

There will be 1 USB adatper per Prisma unit - not 1 per blade, correct?
If I plan to run 3-4 Prisma off a single RPi all is needed is a powered USB hub?

[philipma1957]

I've received a photo of the adapter that has been created for connecting to a RPi. The interface is USB, so that's good news.



I will ship overseas, but I can not estimate a price as I don't have package dimensions. The weight will be somewhere around 8kg.

There will be 1 USB adatper per Prisma unit - not 1 per blade, correct?
If I plan to run 3-4 Prisma off a single RPi all is needed is a powered USB hub?

I think these daisychain  the short tubes did. 

so tube + tube +tube + adapter + rasp pi

at crazyguy I have the rasp pi you sold me with the r-boxes.  If I buy one of these long tubes will you include a new sd card and an adapter to hook up the long tube to rasp pi?

[cesarm]

I think something is wrong with DHL in HK, I bought a cubie in china and they sent me by EMS (instead of dhl) because of some problem with customs related with DHL.

[Xtra7973]

Hello CrazyGuy what happens if the 6 units aren't sold by the deadline? I was really looking forward to getting my hands on a couple of these to mine on.

[CrazyGuy]

Hello CrazyGuy what happens if the 6 units aren't sold by the deadline? I was really looking forward to getting my hands on a couple of these to mine on.

I will be putting the order in tonight regardless of how many are unsold. Remaining units will be sold through ASICPuppy.net at a later date.

[CrazyGuy]

Update:

Batch 4 order was placed last night. I'm still waiting on tracking information for Batch 1 and will provide another update as soon as I receive one.

Good news on the cgminer front. ckolivas is merging the BE driver into the main branch. Those of you that would like to build your own RPi, BBB, Cubie, etc... image can get a head start.

[Xtra7973]

Update:

Batch 4 order was placed last night. I'm still waiting on tracking information for Batch 1 and will provide another update as soon as I receive one.

Good news on the cgminer front. ckolivas is merging the BE driver into the main branch. Those of you that would like to build your own RPi, BBB, Cubie, etc... image can get a head start.

Do you know if this image for the RPI that ckolivas merged works on the RPI B+ model? And im looking for it now to test it myself. Just figured id ask if I cant find it.