CCminer(SP-MOD) Modded GPU kernels.

[giagge]

Hello, for every one who want to try:
https://mega.nz/#!llxlyLoL!8t365SREek8l-gQTSZzmAjcBOPgxmXOQlpTO6NMfi8Y

VS2013, CPU TROMP, CPU XENONCAT, Pascal Only (SM61), AMD OCL support.
I'm on a build with 2015

No work for me , windows 10 x64 , 2x gtx 1070 :

.bat

nheqminer -o stratum+tcp://zec.suprnova.cc:2142 -u USER -p PASS -t 0 -cd 0 1



I need mining on supernova .

[1714699260]

1714699260

[1714699260]

1714699260

[bensam1231]

Not sure where the community winner miners are too, from the contest. That was supposed to end right when it was released, but we haven't seen them yet and winners haven't been announced.

[Sindren]

Not sure where the community winner miners are too, from the contest. That was supposed to end right when it was released, but we haven't seen them yet and winners haven't been announced.

they will do it 2dec .. as is on their site ... seems little scammy for 'slow start'

[sp_]

Selling the miner to the big boys is effectively giving a pre mine to vested interests, increases the pump and therefore the dump and in the end will damage good faith and liquidity. If these guys are so good at writing code sell the software by subscription per rig so everyone pays the same.

I have tried different models. My latest optimized kernel was the LBRY kernel with a buildt in 3.3% fee. I spendt 100hours to do the job, and just recieved a few BTC for the job.  My LBRY #3 kernel is still the fastest on the maxwell cards. (980ti up from 230MHASH to 300MHASH) etc..
I would have earned more flipping burgers at Burger King..

I also recieved and alot of complaints from he other devs. (open source Violation etc. etc.)

My Zcash kernel is around 33% faster than nheqminer v0.2 on the gtx 1060 3gb. and only a few percent faster on the 1070. I didn't spend much time to make it, but I had enough cards to make a decent profit on on the launchdate/weekend, and it is still doing ok.

[ioglnx]

Hello, for every one who want to try:
https://mega.nz/#!llxlyLoL!8t365SREek8l-gQTSZzmAjcBOPgxmXOQlpTO6NMfi8Y

VS2013, CPU TROMP, CPU XENONCAT, Pascal Only (SM61), AMD OCL support.
I'm on a build with 2015

No work for me , windows 10 x64 , 2x gtx 1070 :

.bat

nheqminer -o stratum+tcp://zec.suprnova.cc:2142 -u USER -p PASS -t 0 -cd 0 1



I need mining on supernova .

No need to use the statrum+tcp thin its already included into the miner.
You are also using wrong params..-o is not implemented ..i suggest use -h for help..
you need the -l switch for location

[Amph]

Selling the miner to the big boys is effectively giving a pre mine to vested interests, increases the pump and therefore the dump and in the end will damage good faith and liquidity. If these guys are so good at writing code sell the software by subscription per rig so everyone pays the same.

I have tried different models. My latest optimized kernel was the LBRY kernel with a buildt in 3.3% fee. I spendt 100hours to do the job, and just recieved a few BTC for the job.  My LBRY #3 kernel is still the fastest on the maxwell cards. (980ti up from 230MHASH to 300MHASH) etc..
I would have earned more flipping burgers at Burger King..

I also recieved and alot of complaints from he other devs. (open source Violation etc. etc.)

My Zcash kernel is around 33% faster than nheqminer v0.2 on the gtx 1060 3gb. and only a few percent faster on the 1070. I didn't spend much time to make it, but I had enough cards to make a decent profit on on the launchdate/weekend, and it is still doing ok.

100 hour is not even a 30 days time(assuming a normal job of 8 hours per day) for a regular job that pay $1000 a month, so "few btc" is correct i guess, what you expected ton of btc for some line of codes?

1 btc is worth $700 now, there are people that work 1 month to have that amount

[jiggytom]

Selling the miner to the big boys is effectively giving a pre mine to vested interests, increases the pump and therefore the dump and in the end will damage good faith and liquidity. If these guys are so good at writing code sell the software by subscription per rig so everyone pays the same.

I have tried different models. My latest optimized kernel was the LBRY kernel with a buildt in 3.3% fee. I spendt 100hours to do the job, and just recieved a few BTC for the job.  My LBRY #3 kernel is still the fastest on the maxwell cards. (980ti up from 230MHASH to 300MHASH) etc..
I would have earned more flipping burgers at Burger King..

I also recieved and alot of complaints from he other devs. (open source Violation etc. etc.)

My Zcash kernel is around 33% faster than nheqminer v0.2 on the gtx 1060 3gb. and only a few percent faster on the 1070. I didn't spend much time to make it, but I had enough cards to make a decent profit on on the launchdate/weekend, and it is still doing ok.

How much does your lbry kernel get on 1070? Is the fee version available on github for Windows?  Sorry for not researching, I'm on mobile.

Are you sharing your zec enhanced miner? (Dev fee or for btc?)

[jiggytom]

If you are having issues with unauthorized worker, try this URL instead in cmd equihash.eu.sup.rnova:2142

Which cb and ct are you using? Which cards?

Are you actually seeing the sols /s on screen to be higher or as reported on suprnova? 

[Sindren]

Selling the miner to the big boys is effectively giving a pre mine to vested interests, increases the pump and therefore the dump and in the end will damage good faith and liquidity. If these guys are so good at writing code sell the software by subscription per rig so everyone pays the same.

I have tried different models. My latest optimized kernel was the LBRY kernel with a buildt in 3.3% fee. I spendt 100hours to do the job, and just recieved a few BTC for the job.  My LBRY #3 kernel is still the fastest on the maxwell cards. (980ti up from 230MHASH to 300MHASH) etc..
I would have earned more flipping burgers at Burger King..

I also recieved and alot of complaints from he other devs. (open source Violation etc. etc.)

My Zcash kernel is around 33% faster than nheqminer v0.2 on the gtx 1060 3gb. and only a few percent faster on the 1070. I didn't spend much time to make it, but I had enough cards to make a decent profit on on the launchdate/weekend, and it is still doing ok.

100 hour is not even a 30 days time(assuming a normal job of 8 hours per day) for a regular job that pay $1000 a month, so "few btc" is correct i guess, what you expected ton of btc for some line of codes?

1 btc is worth $700 now, there are people that work 1 month to have that amount

in fact regular salary in sw dev is 4~5k $ ..

[giagge]

Hello, for every one who want to try:
https://mega.nz/#!llxlyLoL!8t365SREek8l-gQTSZzmAjcBOPgxmXOQlpTO6NMfi8Y

VS2013, CPU TROMP, CPU XENONCAT, Pascal Only (SM61), AMD OCL support.
I'm on a build with 2015

No work for me , windows 10 x64 , 2x gtx 1070 :

.bat

nheqminer -o stratum+tcp://zec.suprnova.cc:2142 -u USER -p PASS -t 0 -cd 0 1



I need mining on supernova .

No need to use the statrum+tcp thin its already included into the miner.
You are also using wrong params..-o is not implemented ..i suggest use -h for help..
you need the -l switch for location

The correct .bat is ? .

[sp_]

How much does your lbry kernel get on 1070? Is the fee version available on github for Windows?  Sorry for not researching, I'm on mobile.
Are you sharing your zec enhanced miner? (Dev fee or for btc?)

LBRY sp-mod #3 vs opensource 1.8.2
Faster compute 5.0 +5-7% (750,750ti,960m)
Faster compute 5.2 +10-25% (950,960,970,980,980ti,titanx)
Faster compute 6.1 +5-11% (1070,1080) (gtx 1060 0%)

3-4 weeks after my release, Alexis Provos was payed by the LBRY team to release an opensource miner that performed close to my private kernel on the gtx 1070.

With correct clocks and intensity my LBRY does 310-320MHASH on the gtx 1070 and 400-420 MHASH on the 1080.

[djm34]

I also doubt that djm will release anything..he just wanted to show and makes us all feel boo-ja..suck it and cry.
Meanwhile the profit is made by him and those who have this kernel so coins are not generated equal..

@jiggytom. Default is 128..64 gives me way better results..on my 5 cards..can change on different setup sure.
I'm no getting constantly 0.0003xx-4xxx zcash per block before i made the build I just got around 0.00019 to lower 21..

He'll release it, he just takes his sweet ass time doing it, just like with his other crowdsource miners. They're basically worthless when they finally come out.

not that you care, since you never contributed to any of the crowdfunding I done

[giagge]

Hello, for every one who want to try:
https://mega.nz/#!llxlyLoL!8t365SREek8l-gQTSZzmAjcBOPgxmXOQlpTO6NMfi8Y

VS2013, CPU TROMP, CPU XENONCAT, Pascal Only (SM61), AMD OCL support.
I'm on a build with 2015

No work for me , windows 10 x64 , 2x gtx 1070 :

.bat

nheqminer -o stratum+tcp://zec.suprnova.cc:2142 -u USER -p PASS -t 0 -cd 0 1



I need mining on supernova .

No need to use the statrum+tcp thin its already included into the miner.
You are also using wrong params..-o is not implemented ..i suggest use -h for help..
you need the -l switch for location

The correct .bat is ? .

Now work but have same result with original nheqminer_v0.3a_suprnova .

[Sindren]

I also doubt that djm will release anything..he just wanted to show and makes us all feel boo-ja..suck it and cry.
Meanwhile the profit is made by him and those who have this kernel so coins are not generated equal..

@jiggytom. Default is 128..64 gives me way better results..on my 5 cards..can change on different setup sure.
I'm no getting constantly 0.0003xx-4xxx zcash per block before i made the build I just got around 0.00019 to lower 21..

He'll release it, he just takes his sweet ass time doing it, just like with his other crowdsource miners. They're basically worthless when they finally come out.

not that you care, since you never contributed to any of the crowdfunding I done

and what is your idea about your zminer? open with cf, private, sell for ?? can you tell me your expectations pls?

[ioglnx]

I also doubt that djm will release anything..he just wanted to show and makes us all feel boo-ja..suck it and cry.
Meanwhile the profit is made by him and those who have this kernel so coins are not generated equal..

@jiggytom. Default is 128..64 gives me way better results..on my 5 cards..can change on different setup sure.
I'm no getting constantly 0.0003xx-4xxx zcash per block before i made the build I just got around 0.00019 to lower 21..

He'll release it, he just takes his sweet ass time doing it, just like with his other crowdsource miners. They're basically worthless when they finally come out.

not that you care, since you never contributed to any of the crowdfunding I done

Well I just mine since 2 month mate..so i never did anything with crypto before that time. So what you blame me fore that i just stepped into mining?
And as many others I asked you what you gonna do..will you crowdfund will your apply a fee..the longer we wait the less we all get.

My statement is just an thought I told you that I'm impressed about the miners you did what i found out in 2 month of mining..but somehow not answering and just showing us how good you mine compared to us who suck the little 30-40sol/s of our cards ..it feels a bit unfair and snippy
Because there is a desperate need of a better miner..thats all..

[sp_]

and what is your idea about your zminer? open with cf, private, sell for ?? can you tell me your expectations pls?

I will wait for DJM34 to release his, and then add a few percent as usual  


LBRY sp-mod private #4 is pretty good on the gtx 1060 3GB : (+24% compared to the latest opensource github version on the same clocks.)

6GB:



3GB:

[bensam1231]

I also doubt that djm will release anything..he just wanted to show and makes us all feel boo-ja..suck it and cry.
Meanwhile the profit is made by him and those who have this kernel so coins are not generated equal..

@jiggytom. Default is 128..64 gives me way better results..on my 5 cards..can change on different setup sure.
I'm no getting constantly 0.0003xx-4xxx zcash per block before i made the build I just got around 0.00019 to lower 21..

He'll release it, he just takes his sweet ass time doing it, just like with his other crowdsource miners. They're basically worthless when they finally come out.

not that you care, since you never contributed to any of the crowdfunding I done

Because by the time you do it, it's worthless to mine with. Who pays money for a inferior or antiquated product?

[Sindren]

I also doubt that djm will release anything..he just wanted to show and makes us all feel boo-ja..suck it and cry.
Meanwhile the profit is made by him and those who have this kernel so coins are not generated equal..

@jiggytom. Default is 128..64 gives me way better results..on my 5 cards..can change on different setup sure.
I'm no getting constantly 0.0003xx-4xxx zcash per block before i made the build I just got around 0.00019 to lower 21..

He'll release it, he just takes his sweet ass time doing it, just like with his other crowdsource miners. They're basically worthless when they finally come out.

not that you care, since you never contributed to any of the crowdfunding I done

Because by the time you do it, it's worthless to mine with. Who pays money for a inferior or antiquated product?

agree .. in fact i'm able to pay 0.1btc for it per card now but not in a month.

[ioglnx]

Well we should stay calm..the discussion drifting away from good to bad.
djm will let us know when he is ready to release it - hopefully earlier than to late and maybe if he adds a fee and has big user basis it doesn't need any crowdfunding. Like Claymore as example.
I would appreciate the step as we can meanwhile all have benefit of used potential of our GTX1080 and GTX1070 and maybe soon GTX1080 TI :-D

But this situation makes me stop mining with nvidia and selling my cards and switching to AMD ..its okay. If not green than red.

[vaulter]

Well we should stay calm..the discussion drifting away from good to bad.
djm will let us know when he is ready to release it - hopefully earlier than to late and maybe if he adds a fee and has big user basis it doesn't need any crowdfunding. Like Claymore as example.
I would appreciate the step as we can meanwhile all have benefit of used potential of our GTX1080 and GTX1070 and maybe soon GTX1080 TI :-D

But this situation makes me stop mining with nvidia and selling my cards and switching to AMD ..its okay. If not green than red.

Don't count on 1080ti soon - will come next year... But frankly it will be an option if you want high density rigs as with Pascal GPUs they scale linear (1080 is GDDRx bound in memory related apps so will be 1080ti but its 384bit)