joblo
Legendary
Offline
Activity: 1470
Merit: 1114
|
|
November 08, 2015, 03:39:11 PM |
|
the test machine was updated to fedora 23 x64 cuda 7.5 - which meant gcc was updated also ...
it seems that broke something in the compile ... when compiling in fedora 22 x64 cuda 7.5 - it all compiles well again ...
ill check this latest compile when i get the chance - but it looks to be stable so far ...
tanx sp ...
#crysx
Check for configure errors before running make, you may just be missing a package.
|
|
|
|
TarzanSupplex
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 08, 2015, 05:46:30 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
November 08, 2015, 07:59:01 PM Last edit: November 08, 2015, 08:20:50 PM by djm34 |
|
joincoin is still profitable, but only with my 120% faster penta miner..
0.3BTC and you will get it.
quark, lyra2v2 and etherum are profitable now. But only with private kernals.
sp_ How much faster is quark in the private kernal? Considering the purchase but I doubt it's worth it or maybe the ROI would take a long time since I only have 7 GPUs mining (750ti). Thank you. SP doesn't sell his Quark. You have to suck DJMs dick hard to get the Lyra miner... and have a lot of money. which part did you fail exactly ? I don't remember any of it, but you really suck at sucking dev dicks in general
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
November 08, 2015, 09:58:09 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster?
|
|
|
|
TarzanSupplex
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 08, 2015, 10:18:33 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? Thanks- I have been setting intensity by device since I have a 950 in the mix. 20 seems to work well with the non-monitor 980 ti-
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
November 08, 2015, 11:19:19 PM |
|
@SP
When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.
Thanks - pokeytex
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
November 09, 2015, 01:37:44 AM |
|
@SP
When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.
Thanks - pokeytex
thats usually an intensity error mate ( cuda threads in gpu memory ) ... #crysx
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
November 09, 2015, 07:05:17 AM Last edit: November 09, 2015, 08:53:42 AM by sp_ |
|
@SP When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960. Thanks - pokeytex
1. Make sure that you use a 64bit windows installation. 2. Upgrade to the latest driver. 3. Add 16Gig of virtual memory in windows and reboot If it doesn't work, reduce the intensity. with -i 23 or similar.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 09, 2015, 08:33:12 AM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
November 09, 2015, 10:37:31 AM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory. You can verify this by running gpu-z and observe the allocated memory. The -X intensity is linear growth of the memory buffer. The -i is exponential.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
November 09, 2015, 12:15:33 PM |
|
@SP
When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960.
Thanks - pokeytex
thats usually an intensity error mate ( cuda threads in gpu memory ) ... #crysx Thank you - I will try the intensity setting.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
November 09, 2015, 12:16:20 PM |
|
@SP When I mine Joincoin on Pentablake I keep getting "GPU# 2 - scanhash_pentablake out of memory" error. Do you know how to fix this? GPU#2 is a GTX 960. Thanks - pokeytex
1. Make sure that you use a 64bit windows installation. 2. Upgrade to the latest driver. 3. Add 16Gig of virtual memory in windows and reboot If it doesn't work, reduce the intensity. with -i 23 or similar. SP - ok I will make a larger vm in Windows and try the intensity setting. Thank you.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 09, 2015, 12:25:53 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory. You can verify this by running gpu-z and observe the allocated memory. The -X intensity is linear growth of the memory buffer. The -i is exponential. So if I set no overclocking and by using the -X and -i parameters I get a higher hash rate.... no overclocking needed? Or, theses parameters add extra hashrate and I can overclock getting even higher hashrate?
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
November 09, 2015, 12:31:14 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory. You can verify this by running gpu-z and observe the allocated memory. The -X intensity is linear growth of the memory buffer. The -i is exponential. So if I set no overclocking and by using the -X and -i parameters I get a higher hash rate.... no overclocking needed? Or, theses parameters add extra hashrate and I can overclock getting even higher hashrate? setting the intensity is a matter of using the gpu resources better. overclocking works on top of it.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 09, 2015, 12:45:00 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory. You can verify this by running gpu-z and observe the allocated memory. The -X intensity is linear growth of the memory buffer. The -i is exponential. So if I set no overclocking and by using the -X and -i parameters I get a higher hash rate.... no overclocking needed? Or, theses parameters add extra hashrate and I can overclock getting even higher hashrate? setting the intensity is a matter of using the gpu resources better. overclocking works on top of it. Ok thx pallas. And how do I do that with mixed cards. 750ti an 980ti in one bat file with the -X parameter.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
November 09, 2015, 01:07:22 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? @Sp ...Is this -X intensity taking the place of over clocking? thx No overclocking. The intensity parameter adjusts the size of the number of hashes that are stored in memory. You can verify this by running gpu-z and observe the allocated memory. The -X intensity is linear growth of the memory buffer. The -i is exponential. So if I set no overclocking and by using the -X and -i parameters I get a higher hash rate.... no overclocking needed? Or, theses parameters add extra hashrate and I can overclock getting even higher hashrate? setting the intensity is a matter of using the gpu resources better. overclocking works on top of it. Ok thx pallas. And how do I do that with mixed cards. 750ti an 980ti in one bat file with the -X parameter. If I am not mistaking - I believe it goes like this - -X 18,18,15,20,18 (where the placement of the intensity number refers to your GPU number) So GPU 0,1,2,3,4 in a (5) card system? Correct me if I am wrong please.
|
|
|
|
TarzanSupplex
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 09, 2015, 11:32:23 PM |
|
what is the default intensity for Lyra2rev2 on a 980 ti??
The default intensity is -X 18. You can test with -X 30. Might be faster? Thanks- I have been setting intensity by device since I have a 950 in the mix. 20 seems to work well with the non-monitor 980 ti- My poor superclocked 950 can barely get 5400 KH while my overclocked 750 TI can get north of 5200 KH using much less power- is there any more data I can give you to help with dialing in the 950? Intensity for both seems to top out at 20.
|
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
|
November 09, 2015, 11:57:50 PM |
|
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
antantti
Legendary
Offline
Activity: 1176
Merit: 1015
|
|
November 10, 2015, 12:00:56 AM |
|
My poor superclocked 950 can barely get 5400 KH while my overclocked 750 TI can get north of 5200 KH using much less power- is there any more data I can give you to help with dialing in the 950? Intensity for both seems to top out at 20.
There is nothing wrong with your 950 or your config. All 9-series maxwell gpus are poor in lyra2v2 performance compared to 7-series maxwell hash/w wise. 950/60 really suck because of their crippled 128-bit memory lane. Better mine some other algo with them.
|
|
|
|
TarzanSupplex
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 10, 2015, 12:18:52 AM |
|
My poor superclocked 950 can barely get 5400 KH while my overclocked 750 TI can get north of 5200 KH using much less power- is there any more data I can give you to help with dialing in the 950? Intensity for both seems to top out at 20.
There is nothing wrong with your 950 or your config. All 9-series maxwell gpus are poor in lyra2v2 performance compared to 7-series maxwell hash/w wise. 950/60 really suck because of their crippled 128-bit memory lane. Better mine some other algo with them. 980 TIs arent too bad- but I get what youre saying. I think there is some room for optimization on the 950 however- Its should be able to hang and outpace the 750 TI by a wider margin- Usually I mine Quark- but the payrate has tanked as of late...
|
|
|
|
|