CCminer(SP-MOD) Modded GPU kernels.

[Epsylon3]

Unsure what its going on... but look like indeed, i just hope it is, or temporary provider issues...

For now consider to move/mine elsewhere... I had to connect via dsl to post this message, all https/ssl connections are impossible (even ssh) to the outside

but the ping works perfectly and is good... Never seen something like that, that look like my connection is "proxied" by my provider and i really dont like that

edit: seems back online now... got a lot of orphans on some coins

[go6ooo1212]

Unsure what its going on... but look like indeed, i just hope it is, or temporary provider issues...

For now consider to move/mine elsewhere... I had to connect via dsl to post this message, all https/ssl connections are impossible (even ssh) to the outside

but the ping works perfectly and is good... Never seen something like that, that look like my connection is "proxied" by my provider and i really dont like that

edit: seems back online now... got a lot of orphans on some coins

Whick region is that , mate ...

[Oakey22]

Unsure what its going on... but look like indeed, i just hope it is, or temporary provider issues...

For now consider to move/mine elsewhere... I had to connect via dsl to post this message, all https/ssl connections are impossible (even ssh) to the outside

but the ping works perfectly and is good... Never seen something like that, that look like my connection is "proxied" by my provider and i really dont like that

edit: seems back online now... got a lot of orphans on some coins

Any idea what it was?

[sp_]

Sure I will, but have a look at these issues because starting the forced-payment immediately it creates too many issues.

Look at the comments. You need to increase the number of retries with the -R parameter. -R 7 seems to work but you might want to increase it since you are on a bad connection. (Antantti) use the -R parameter and if you click on his link, you see that the miner is giving a high and stable hashrate on miningrentals.

[sibisi666]

Is there OC software from wich I can lower mem -1000 AND i can link all graphic card together, so far i tried nvinspector, pait thunder, expert tool...msi ab

[mirny]

Unsure what its going on... but look like indeed, i just hope it is, or temporary provider issues...

For now consider to move/mine elsewhere... I had to connect via dsl to post this message, all https/ssl connections are impossible (even ssh) to the outside

but the ping works perfectly and is good... Never seen something like that, that look like my connection is "proxied" by my provider and i really dont like that

edit: seems back online now... got a lot of orphans on some coins

Don't you know about any "checker", where you can check if the domain is ddosed or, not?

[wanghaoqd]

using LBRY sp-mod #3:
GTX960: 90m => 97M
GTX970: 130M => 150M
GTX1070: 260M => 280M

[Epsylon3]

Any idea what it was?

No, temporary provider issue i think... There was a firmware update to put ssl on the admin ui. Might be related.

My logs did not show more abuse than normal time... My fiber router logs at least 250 Ping of Death and 100 port scan per week, but generally do not affect yiimp.

They are more frequent since decred.

[Velgelm]

ccminer 1.8.1 opensource
MSI GTX 960

[bensam1231]

Guessing Nik bought it from Scrypt... He isn't responding because you didn't buy it from him.

CCminer has a bug with MRR, you have to use the dynamic port it tries to reconnect to as it doesn't tolerate stratum redirection for some reason. Epsylons version has this bug as well.

Still saying SP you should lower fee to 2% and it should be a free release.

I agree, but with the kernel from epsylon you haven't got a fee, and a "forced donation" the first 4 minutes it starts, or reconnects.

There might be an issue in #3. If you loose connection for a long time, it will switch to donation mining and do another 4mins.

4 minutes for me 116 for you. if you loose connection within the 116mins, the process restarts. (if you use the -R reconnect parameter in the bat, you should put it to a high value or remove it.)

With -R 5 it will try to reconnect to your pool 5 times.

If you try to connect to mrr, you need to specify first the general port, so MRR itself suggests the correct one later.

Doing this, means that you donate, every single time, to sp; if you choose a wrong port then, the donation time it's almost 100%, because of it reconnects then to the sp hidden pool (the "donation, or better to say paying, one")

The donations timer shouldn't be placed first, but last; 116.4 minutes to me and LATER 3.3% to you, not the opposite.

Will you continue to use this system or will you change it in the next release? As you can see there's a general opinion against these kind of methods of remuneration, from your customers.

I could think that these could be intentional, but I want to believe that it's not. This fee miner isn't working properly and I'm absolutely not satisfied with it.

I've just restrted my machines with tpruvot 1.8.1 open source, having paid for yours.

If you do this, someone can simply restart the miner before the donation takes place. Not sure why this is such a big deal. Obviously the redirect should be fixed, but this isn't a problem for me in the same way it seems to be for you.

O well  Shit

http://cryptomining-blog.com/tag/quark-asic/

We need more memory hardened coins.

Quark and Qubit have been dead for about two months. They were already hit by the ASICs before people could receive these.

[sp_]

Working on LBRY sp-mod #4... Managed to break 200MHASH stable on the 1060 6gb..
Small boost on the 1070 as well..

[sp_]

1.2.3...

207.5MHASH!!

120Watt measured in the wall.

[go6ooo1212]

Nice score yeah , can't wait to see what could 1070 do...

[tarrier]

1.2.3...

207.5MHASH!!

120Watt measured in the wall.

http://i67.tinypic.com/op8lkn.png

PLZ check PM.  thanks.

[Vegetablepin]

LBRY net hash now 3.2t   I dont understand because it suggests that something was being mined other than ETH and now ETH and LBRY are being dual mined by something large with private miner that just switched its hashrate over. DCR hashrate has been rising too. I didn't check SIA, but maybe someone is speculating on LBRY price holding from here forward. I would assume they are going to be holding their mined coins as well. I guess mining XMR.

[AzzAz]

LBRY net hash now 3.2t   I dont understand because it suggests that something was being mined other than ETH and now ETH and LBRY are being dual mined by something large with private miner that just switched its hashrate over. DCR hashrate has been rising too. I didn't check SIA, but maybe someone is speculating on LBRY price holding from here forward. I would assume they are going to be holding their mined coins as well. I guess mining XMR.

Well, many parts of the world ppl are waiting for the new cards... mining boom is going on.Soon it will be better to buy coins, not mine them. Again.

[thhjs]

Hello,

I am new to this. I have downloaded the CCMiner of the first post. I then started the following command :

ccminer -o stratum+tcp://monerohash.com:3333 -u my address -p x

It comes with an error :

SP-Mod 1.5.79
Compiled with Visual C++ 18 using Nvidia CUDA Toolkit 7.5

  Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
  CUDA support by Christian Buchner, Christian H. and DJM34
  Includes optimizations implemented by sp, klaust, tpruvot and tsiv.

[2016-09-16 20:15:43] Starting Stratum on stratum+tcp://monerohash.com:3333
[2016-09-16 20:15:43] NVAPI GPU monitoring enabled.
[2016-09-16 20:15:43] 1 miner thread started, using 'x11' algorithm.
[2016-09-16 20:15:43] Binding thread 0 to cpu 0 (mask 1)
[2016-09-16 20:15:44] JSON-RPC call failed: {
   "code": -1,
   "message": "invalid method"
}
[2016-09-16 20:15:44] ...retry after 5 seconds
[2016-09-16 20:15:49] JSON-RPC call failed: {
   "code": -1,
   "message": "invalid method"
}
[2016-09-16 20:15:49] ...retry after 5 seconds
[2016-09-16 20:15:53] CTRL_C_EVENT received, exiting once miner jobs complete.  Ctrl+C again to abort miner jobs
[2016-09-16 20:15:54] Stratum connection timed out
[2016-09-16 20:15:54] Stratum connection interrupted

When I use an version which I found at : https://www.cryptocompare.com/mining/guides/how-to-mine-monero It gets a rate of 265.47 H/s of a EVGA 1070 SC

What am I doing wrong? Doesn't this CCMiner support Monero?

[Vegetablepin]

What am I doing wrong? Doesn't this CCMiner support Monero?

no

https://github.com/tsiv/ccminer-cryptonight

parameters differ from card to card

[sp_]

Release #4 will have 5-10MHASH more boost on the 1070 cards. and 30-40MHASH on the 1060. (compared to #3)

[ltc_bilic]

Release #4 will have 5-10MHASH more boost on the 1070 cards. and 30-40MHASH on the 1060. (compared to #3)

That would be nice to see but you have to prove it first. Right now with sp-mod3 I can achieve stable 197 mhash on same card Gigabyte 1060 6GB, same OC clocks as in you're previous screenshot, that's only 10mhash improvement,...hope it was only a beta build.