Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[abrgeza]

No matter what I can't install the 16.xx to work on NY RX580's ...

1) downloaded 16.9.2 from AMD web page
2) copy content on 17.4.4 inf folder
3) DDU uninstaller in safe mode to remove old drivers
4) tried manual installation, it installs, then reboot and miner says no OPENCL GPU were found.

works fine for me.

Didn't try yet but won't do it neither: Copy RX480 bios on my RX580 (CAN BRICK MY GPU)

it does not brick my rx580 but it does not work for me.
even with rx480 bios drivers recognize gpu as rx580.

[abrgeza]

@eXtremal

Any usable version for Vega cards?
Anything is better than nothing. 

[csa1234]

hello ı download Current stable release (version 9.4.1) and ı put my wallet adress to config and second one but when ı enter my wallet adress to xpmforall.org ıcant see result or anything whats wrong
ı start mining yesterday

@eXtremal

Try at coinsforall pool

[csa1234]

I finally was able to obtain an stabilized driver to work with my RX580 for xpm. Crimson 18 beta with over clock core to 1495 MHz I'm getting 9.45 cpd only... I know RX580 can get 11 - 12 cpd with coming miner updated version. I hope it does, if it does I will open the first primecoin computer parts shop online with very competitive prices. Even when they are out stock I will bevable to have them in stock as I have direct line to more than 10 warehouses retailers.

[liberta]

Hello! Somebody tried this card???SAPPHIRE NITRO R9 FURY 4G HBM 4098bit 1020/500MHz with Back Plate
What about CPD??

[csa1234]

GPU keep crashing from miner log, I don't know why but its too unstable with kernel.bin that comes by default. When I compile my own kernel the cpd drops dramatically to 7 - 8 cpd

I'm about to try claymore but still need to wait till my wallet complete the whole synchronization

[csa1234]

i finally find the problem causing the crash of the GPUs. Set the powertunes to 0 value and that made the job. Also V10 of the miner seems more stable than v9

[csa1234]

Again keep crashing, no clue how to stabilize anymore

[mauserus]

I have lost connection today to xpmforall and coinsforall via rostelecom (russia):
C:\Users\rootuser>tracert xpmforall.org

Tpaccиpoвкa мapшpyтa к xpmforall.org [37.187.50.246]
c мaкcимaльным чиcлoм пpыжкoв 30:

  1    <1 мc    <1 мc    <1 мc  192.168.1.1
  2     4 ms     5 ms     3 ms  80.234.75.98
  3     4 ms     4 ms     4 ms  213.59.233.144
  4    43 ms    43 ms    43 ms  ae40.stkm-cr4.intl.ip.rostelecom.ru [217.107.67.
31]
  5    44 ms    43 ms    43 ms  hu0-2-0-0.ccr21.sto01.atlas.cogentco.com [149.6.
169.145]
  6    45 ms    43 ms    43 ms  be3377.ccr22.sto03.atlas.cogentco.com [154.54.36
.89]
  7    68 ms    68 ms    68 ms  be2282.ccr42.ham01.atlas.cogentco.com [154.54.72
.105]
  8    77 ms    76 ms    77 ms  be3029.ccr21.prg01.atlas.cogentco.com [154.54.59
.62]
  9     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.
 10     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.
 11     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.

I will solve this problem for myself with 3g modems, but it is main provider in russia...

[eXtremal]

26 Jan 2017: coinsforall.io repaired after primecoin daemon crash, miners will receive compensation for 5 hours

I have lost connection today to xpmforall and coinsforall via rostelecom (russia):
C:\Users\rootuser>tracert xpmforall.org

Tpaccиpoвкa мapшpyтa к xpmforall.org [37.187.50.246]
c мaкcимaльным чиcлoм пpыжкoв 30:

  1    <1 мc    <1 мc    <1 мc  192.168.1.1
  2     4 ms     5 ms     3 ms  80.234.75.98
  3     4 ms     4 ms     4 ms  213.59.233.144
  4    43 ms    43 ms    43 ms  ae40.stkm-cr4.intl.ip.rostelecom.ru [217.107.67.
31]
  5    44 ms    43 ms    43 ms  hu0-2-0-0.ccr21.sto01.atlas.cogentco.com [149.6.
169.145]
  6    45 ms    43 ms    43 ms  be3377.ccr22.sto03.atlas.cogentco.com [154.54.36
.89]
  7    68 ms    68 ms    68 ms  be2282.ccr42.ham01.atlas.cogentco.com [154.54.72
.105]
  8    77 ms    76 ms    77 ms  be3029.ccr21.prg01.atlas.cogentco.com [154.54.59
.62]
  9     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.
 10     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.
 11     *        *        *     Пpeвышeн интepвaл oжидaния для зaпpoca.

I will solve this problem for myself with 3g modems, but it is main provider in russia...

I have checked some providers, no problems detected.

[eXtremal]

26 Jan 2017: coinsforall.io repaired after primecoin daemon crash, miners will receive compensation for 5 hours

Done.

[mauserus]

26 Jan 2017: coinsforall.io repaired after primecoin daemon crash, miners will receive compensation for 5 hours

I have checked some providers, no problems detected.

Problem was disappear after 8-10 hours. Apparently there were problems with the connect to your hosting on their lines...

[catfish78]

It's winter here and I turned my old 280x/270x-s back to mine Primecoin - it gives a lot of free heat!

Is it worth to mine XPM with newer cards, like 570/580-s? (currently mining ETH with those cards)

[icelove]

4*1080  win10 i5-3570 CPU 100% .. how to fix?

[vincec]

will you optimize the code for vega - fiji ? fury x is showing lot of potential on this coin --- atm 19 cpd but high power ... if i want to cut power i can get half power @ 14 cpd.

May I know your driver version? Thanks! I got only 10~cpd.

[csa1234]

No matter what I can't install the 16.xx to work on NY RX580's ...

1) downloaded 16.9.2 from AMD web page
2) copy content on 17.4.4 inf folder
3) DDU uninstaller in safe mode to remove old drivers
4) tried manual installation, it installs, then reboot and miner says no OPENCL GPU were found.

works fine for me.

Didn't try yet but won't do it neither: Copy RX480 bios on my RX580 (CAN BRICK MY GPU)

it does not brick my rx580 but it does not work for me.
even with rx480 bios drivers recognize gpu as rx580.

which RX580 bios version you have? ni mean which RX580 brand you have, so i can look for the bios and try it

[abrgeza]

which RX580 bios version you have? ni mean which RX580 brand you have, so i can look for the bios and try it
[/quote]

Sapphire Nitro+ RX580 4GB
bios with modified memory strap: https://drive.google.com/file/d/1WjFBgwefvYmtuUzwW7HVhCAzvjkaJQVw/view?usp=sharing

You can mod bios with PolarisBiosEditor or SRBPolaris.

[abrgeza]

will you optimize the code for vega - fiji ? fury x is showing lot of potential on this coin --- atm 19 cpd but high power ... if i want to cut power i can get half power @ 14 cpd.

May I know your driver version? Thanks! I got only 10~cpd.

try blockchain or 16.9.2 drivers.
you should get around 15.5cpd for fury x at stock frequency.

[csa1234]

how do i request payment from xpmforall.io?

[abrgeza]

how do i request payment from xpmforall.io?

no manual request on xpmforall, auto payout is 4xpm.
you can manual request payout  on coinsforall.