Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[zeki555]

I also noticed that you sent less coins today than usual...yesterday 48 coins, the day before 44 and today barely 36...Are there some problems with the pool?

Diffuculty raises very fast, orphan rate also too high.
With current network hashrate diffuculty must be 11.7.

Is there a ready compiled version of this for linux?

I'm working with a mining os which is pretty closed.

Miner release contains linux version than can run almost everywhere (compiled on 64 bit Ubuntu 12.04).

Hello guys, is there a nvidia miner for this?

Miner works with NVidia, but at this moment Linux recommended, because Windows version have a problem - 100% CPU load.

Where can I get a compiled version for linux (nvidia). Or else how do I compile (sorry new to linux (ubuntu))?

[crazyice0223]

What is the number of servers and port for mining xpm on coinsforall.io?

[Heguli97]

what kind of results are expected with a 1080ti? Mine are doing 0.65 cpd.

Also anyone mining with nvOC? I was hoping to set up mining for all of my rigs

[crazyice0223]

https://upload-images.jianshu.io/upload_images/11310453-bb3a2d870419949d.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/579

what's wrong with this? then go crash
https://upload-images.jianshu.io/upload_images/11310453-e0a40c7e9c5d9c2f.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/564

[ap1]

RX 570 really shows only 0.3 with amdgpu-pro, it's not suitable drivers for XPM. 0.45 CPD for 1080Ti also too slow, what driver do you use? You can try this:

Is there any driver other than amdgpu-pro for RX570/580 on Linux?
Or currently the only way to mine XPM efficiently with RX570/580 is running under Windows?

Update:
What I found out is that adl doesn't work with amdgpu driver (and seems AMD get rid of ADL library at all).
xpmclient cannot set powertune, clockspeed and fan speed etc anymore.
I didn't use Windows for ages and if I dig a copy to install, probably the mining difficulties will be well passed 12+ already 

[rockallnight]

hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?

[kev7112001]

when mining at target 11 yes

[kev7112001]

you new people really should just read through this thread before pounding extremal with shit ton of questions you will get a faster answer if you just search yourself

[albertorm2]

What does this mean?

GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_353E174B&REV_CF_6&24DF563B&0&0008020BA iBusNumber 24 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName  Radeon (TM) RX 470 Graphics
Failed to ADL_Adapter_ID_Get



Failed to ADL_Overdrive5_ODPerformanceLevels_GetN=12 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: primorial = 13082761331670030 (54 bits)
GPU 0: sieve size = 55050240 (26 bits)

 * warning: no enough candidates (7847 available, must be more than 8192
   * increase sieves per round to 6


Then starts mining but only have 0.26 cpd


Using w10 blockchain drivers

[abrgeza]

hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?

it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.

[Dekor]

Is somebody tried RX550 cards?

[abrgeza]

is somebody tried gtx1060 6GB?
how many cpd per card?

[Bixbitecoin]

hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?

it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.

Very good performance

[cirlama]

what kind of results are expected with a 1080ti? Mine are doing 0.65 cpd.

Also anyone mining with nvOC? I was hoping to set up mining for all of my rigs

I get the same on my 1080 ti with recommended parameters for nvidia (win 10 version)

[cirlama]

Hi all, the question was already asked but not answered:

How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?

[olivergaryccm]

I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.

platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices =        ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]

Anything else from the settings above that can be causing problems? ^

Thanks in advance

[preson]

I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.

platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices =        ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]

Anything else from the settings above that can be causing problems? ^

Thanks in advance

 have the same problem i5 processor and at full power it can handle max 3x 1080ti if i add another so the power goes down

can you fix it somehow?

[LaCroix]

Hi people, please maybe some one knows what its can be?
RX480 cards, two sample rigs, one working well with out troubles, second show something like this:

http://prntscr.com/jc43im

error opencl: -30 whats it can be?
Thank's for helping

[pre.vit]

Hi guys, could you please help me how to get rid of this message "OpenCL error: -9999 at C:/build/xpmclient/src/opencl.cpp:145" during start of miner.

It finds both GPUs (integrated and all 1080TIs) and I expect that Intel iGPU should be blocked somehow. I don't want to block in in BIOS due to dummy HDMI plug.
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'

Used miner - xpmclient-10.2.2-beta-win64.

[viperklas1991]

2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?