Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[i387DX]

Hi Masters, please share a configuration parameter of GTX780/780Ti …

[ciki022]

Miner users reported error "64 bit kernels not supported on 32 bit executable" in some cases, x86_64 version not have this issue.
I can add x86 build support to deploy system (https://github.com/eXtremal-ik7/xpmclient/tree/version/zcash/contrib), after this you can build x86 version by yourself.

Hi,

I have this "64 bit kernels not supported on 32 bit executable" errors on 3 of my 5 mining rigs, AMD Rx 470,480,570 cards.
What can I do to make all my rigs work with 32-bit miner ?

[buny]

Hi,

I have this "64 bit kernels not supported on 32 bit executable" errors on 3 of my 5 mining rigs, AMD Rx 470,480,570 cards.
What can I do to make all my rigs work with 32-bit miner ?

I think that with 32 bits there simply is not enough memory.

[ciki022]

All my rigs are with win 10, all with 8 gb of ram, same drivers, on two on them 32-bit is working, on other 3 not working.
I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.

[buny]

All my rigs are with win 10, all with 8 gb of ram, same drivers, on two on them 32-bit is working, on other 3 not working.
I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.

bit depth of windows 10? 32 or 64 bits?

[ciki022]

64 bit, ofcourse.

[a7269118]

Hello, may I have someone encountered this problem?

GPU has RX570, a total of 9
My computing power has 3.13 CPD

In theory, the final test difficulty is 11.30, and there will be 16 XPM in one day.

But when I actually tested for an hour, it only increased by 0.42 XPM, which is equivalent to about 10 XPM per day, which is very different from the result of the calculator.

It is the same whether  use version 10.2.2 or 10.3.
Whether the driver version is the latest 19.3.1 or the mining driver is the same
My parameters are set as follows

platform = "amd";
cpuload = "1";
target = "auto";
sieveSize = "420";
weaveDepth = "40960";
width = "auto";
windowSize = "8192";
multiplierLimits = ["24", "31", "35"];


Overclocking parameters are the same as Core 1300 / Memory 1750, or Core 1150 / Memory 2000

The average daily is lower than the computer 10~14 XPM
But it started to decrease after February 24~ there are 24 XPM in one day.

I have been digging for half a year, but never less than the calculator is so big

[irritant]

looks like difficulty has gone back up
http://xpm.muuttuja.org/charts/

[a7269118]

But now it is not a difficult problem, it is the difference between the actual number of mining and the result calculated by the calculator.

[Keadyar]

But now it is not a difficult problem, it is the difference between the actual number of mining and the result calculated by the calculator.

Due to the fact that for several days the entire crypto market has been growing, the profitability of cryptocurrency mining has been increasing with each passing hour. It is very nice to watch! I hope that the mining industry will come to life!

[buny]

( and long time ago it was promised that will be fixed but we are still waiting for that)

What is the benefit to the pool owner? 

[a7269118]

But now it is not a difficult problem, it is the difference between the actual number of mining and the result calculated by the calculator.

Later I will power +25~30%
The daily income is the same as the calculator result.

But the 10.3 version of the GPU often digs half of the crash, the probability is quite high.
Even the mining window closed for no reason.

In version 10.2.2, such overclocking parameters are very stable, but become unstable at 10.3, and even the core 1150 / memory 2000 collapses.

Ultimately supported by version 10.3

# GPU crash handling
# Enter OS terminal command here
# for example:
#   onCrash = "shutdown -r 1"
onCrash = "taskkill /f /im xpmclient.exe";

Automatically forced to close the mining software when the GPU crashes.

Then with the batch file
:1
TIMEOUT 10
tasklist | find /i "xpmclient.exe"  || echo %date% %time% XPM START >> log.txt && start xpmclient
goto 1

Monitor mining software for execution and monitor every 10 seconds.

If you do not execute, you can automatically restart the mining software.

The last current parameter is

platform = "amd";
cpuload = "1";
target = "auto";
sieveSize = "420";
weaveDepth = "40960";
width = "auto";
windowSize = "8192";
multiplierLimits = ["25", "31", "34"];

The parameters of multiplierLimits = ["25", "31", "34"];
The test result is more than the calculator.

[mauserus]

Can anyone help with vega config? Gpu crashes at once miner recieve work. I have tried Win7x64 with drivers 18.5.1,18.6.1,18.11.2, miners 10.2.2, 10.3. Then I try on win10x64(18.6.1 and 18.5.1 install failed every time, 18.11.2 install succesful) by this guide https://bytwork.com/articles/vega-mayning-monero. Disable "EnableUlps" and CrossfireAutolink, try Overdriventtool settings(and try low clocks with hi voltage), try with monitor on iGPU. And have no changed - crash on recieve work. wtf with vega? rx480(580), r9 290, gtx10xx is just works, vega not...

[mauserus]

Can anyone help with vega config? Gpu crashes at once miner recieve work. I have tried Win7x64 with drivers 18.5.1,18.6.1,18.11.2, miners 10.2.2, 10.3. Then I try on win10x64(18.6.1 and 18.5.1 install failed every time, 18.11.2 install succesful) by this guide https://bytwork.com/articles/vega-mayning-monero. Disable "EnableUlps" and CrossfireAutolink, try Overdriventtool settings(and try low clocks with hi voltage), try with monitor on iGPU. And have no changed - crash on recieve work. wtf with vega? rx480(580), r9 290, gtx10xx is just works, vega not...

Sorry. I'm so stupid. two days f$$k with vega, but one check in config "amd" and "amd vega" i have missed...

[escal3x]

Good day, for all
I have a problem, and I could not find the client version 10.2.2 (xpmclient) for linux on the net. The reason for the numerous searches is that judging by the messages on the forum in the corresponding branch, 10.3 has a less stable hashrate than 10.2. The site has 10.2, but it does not contain a linux binaries. Or is the xpmclient file in the archive the client version 10.2 for linux?
I ask you to give a link to download exactly 10.2 for linux (amd64), if it does not make it difficult ...
Best regards, and sorry for my bad english...

[grizscom]

Hello ALL.
Can it possible to disable the write logs into file at v10.3?
I am running miner for USB-drive and want to minimize writes at drive for avoid it come dead soon.
Any ideas are welcome. Thanks for advice.

[abrgeza]

Good day, for all
I have a problem, and I could not find the client version 10.2.2 (xpmclient) for linux on the net. The reason for the numerous searches is that judging by the messages on the forum in the corresponding branch, 10.3 has a less stable hashrate than 10.2. The site has 10.2, but it does not contain a linux binaries. Or is the xpmclient file in the archive the client version 10.2 for linux?
I ask you to give a link to download exactly 10.2 for linux (amd64), if it does not make it difficult ...
Best regards, and sorry for my bad english...

here you can download 10.2.2 version https://drive.google.com/file/d/1QjJkRWHxxOMR1-_RJNV6EaVdH08nzioW/view?usp=sharing
it contains linux and win version.

[abrgeza]

@eXtremal.ik71

is this good or not?

[eXtremal.ik71]

@eXtremal.ik71

is this good or not?

http://i65.tinypic.com/8vw1uo.png

It looks like memory overclocked too much.

Hello ALL.
Can it possible to disable the write logs into file at v10.3?
I am running miner for USB-drive and want to minimize writes at drive for avoid it come dead soon.
Any ideas are welcome. Thanks for advice.

Not possible without rebuild, I'll add config parameter for logging in next version.

But now it is not a difficult problem, it is the difference between the actual number of mining and the result calculated by the calculator.

Now have a problem with high orphan rate, calculator assume that pool not have orphans at all.

[gambadamba]

telegramm: xpm_bot

Hello!!!
This is a monitor for XPM miners.
Only for the pool 'http://coinsforall.io.'