♦♦♦♦♦♦[ANN]♦♦MTR♦♦MasterTraderCoin♦♦10.4m♦♦TOSHIDESK LLC♦♦ETNA Partnership♦♦♦♦♦♦

[crazywack]

Hello Community,

If anyone has a minute please do me this favor.

I've just applied to have MTR added to Ribbit.me - RibbitRewards





I tweeted them last night and they got back to me today!



I think that its a good idea for everyone to Retweet and if you have the time, send a personal tweet to @RibbitsRewards

This is a really interesting project and I think it has synergy in-line with ToshiDesk / MTR's focus.

I just realized that the community manager for Ribbit Rewards is Franko from FrankoCoin.

https://www.youtube.com/watch?v=kMyUT6digAI

I will mail him now, but if we can all tweet @RibbitRewards asking them to add $MTR to their wallets.

If you tweet them, you earn 10 MTR!

Retweet this https://twitter.com/ToshiDesk/status/640827221796646912 , you earn 5 MTR

Cheers,

MasterTrader777

Tweeted last week

[lab rat hoax]

good ol franko      i remember when it was pumped up to about $3       those were the days baby

[mastertrader777]

Hello Community,

If anyone has a minute please do me this favor.

I've just applied to have MTR added to Ribbit.me - RibbitRewards





I tweeted them last night and they got back to me today!



I think that its a good idea for everyone to Retweet and if you have the time, send a personal tweet to @RibbitsRewards

This is a really interesting project and I think it has synergy in-line with ToshiDesk / MTR's focus.

I just realized that the community manager for Ribbit Rewards is Franko from FrankoCoin.

https://www.youtube.com/watch?v=kMyUT6digAI

I will mail him now, but if we can all tweet @RibbitRewards asking them to add $MTR to their wallets.

If you tweet them, you earn 10 MTR!

Retweet this https://twitter.com/ToshiDesk/status/640827221796646912 , you earn 5 MTR

Cheers,

MasterTrader777

Tweeted last week

Hey Crazywhack!

Send me your MTR address.

Your tweet is what made me look deeper into what RibbitRewards actually was!

I thank you for your support!

Cheers,

MasterTrader777

[8-bit-Party]

Update later today from ETNA.

Things are closing in on finished and we are almost ready for public launch.

Three days ago you said "update later today". Where is this update?

[mastertrader777]

Hey Jc12345,

Can you verify this as working still for me?

Thanks,

MasterTrader777

Here is the Raspberry Pi wallet for v1.1.0.0 - only for the headless daemon (command line wallet).

Important:
1) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
2) Installation directory where the binaries are installed is ~/opt/mtr or /home/pi/opt/mtr
3) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to go to the directory with the wallets and run the daemon (MasterTraderd) with the options you want at the command prompt or in a terminal window
4) An Internet connection is required for the installation
5) A bootstrap.dat is used to fast track the blockchain sync - up to block 113395.
6) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\MasterTrader folder and run the Win client again
7) You need at least an 8GB memory card
8.) The installation itself takes about 30-45min on an out-of-the-box Pi and then a once off import of the blockchain takes another 1-2 hours
9) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
10) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
11) Always backup your wallet first.

Instructions to use the daemon:

1) Since you have an MasterTrader.conf file with the startup settings in it, go to the folder with the binaries ~/opt/mtr and enter ./MasterTraderd in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./MasterTraderd
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./MasterTraderd encryptwallet <yourpassword>
5) To stake with your wallet run the command ./MasterTraderd walletpassphrase <yourpassword> 99999999 true

Let me know about any issues that you may encounter.

To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:

Code:

wget https://bitbucket.org/jc12345/mtr/downloads/mtr_installation_pi.sh && chmod +x mtr_installation_pi.sh && ./mtr_installation_pi.sh && rm -f mtr_installation_pi.sh

Direct links:
Link to installation script
Link to MasterTraderd
Link to Virustotal scan for MasterTraderd
Link to bootstrap.dat up to block 113395
Link to bootstrap.dat up to block 113395, untarred for the Win users
Link to checksums.txt

[jc12345]

Hey Jc12345,

Can you verify this as working still for me?

Thanks,

MasterTrader777

Sure.  I noticed there has been several PI OS updates since June and I have recompiled after doing all the upgrades etc. Seems to be running fine and I will update new binaries later today.

[8-bit-Party]

Update later today from ETNA.

Things are closing in on finished and we are almost ready for public launch.

Four days ago you said "update later today". Where is this update?

[mastertrader777]

Hey Jc12345,

Can you verify this as working still for me?

Thanks,

MasterTrader777

Sure.  I noticed there has been several PI OS updates since June and I have recompiled after doing all the upgrades etc. Seems to be running fine and I will update new binaries later today.

Perfect! Do you think we need a fresh bootstrap as well?

Thanks,

MasterTrader777 

[jc12345]

Hey Jc12345,

Can you verify this as working still for me?

Thanks,

MasterTrader777

Sure.  I noticed there has been several PI OS updates since June and I have recompiled after doing all the upgrades etc. Seems to be running fine and I will update new binaries later today.

Perfect! Do you think we need a fresh bootstrap as well?

Thanks,

MasterTrader777 

Ill upload a fresh one as well.

[mastertrader777]

Hey Jc12345,

Can you verify this as working still for me?

Thanks,

MasterTrader777

Sure.  I noticed there has been several PI OS updates since June and I have recompiled after doing all the upgrades etc. Seems to be running fine and I will update new binaries later today.

Perfect! Do you think we need a fresh bootstrap as well?

Thanks,

MasterTrader777  

Ill upload a fresh one as well.

Love the support mate

Feels good to have all my day 1 investors showing thier support through the development stages.

Cheers,

MasterTrader777  

[8-bit-Party]

Ill upload a fresh one as well.

No need to. Last new node on MTR network has been seen 2 months ago. Yes, no new nodes for last two months. Fresh bootstrap is useless.

[jc12345]

Ill upload a fresh one as well.

No need to. Last new node on MTR network has been seen 2 months ago. Yes, no new nodes for last two months. Fresh bootstrap is useless.

Ill do it in anyways.

[mastertrader777]

Ill upload a fresh one as well.

No need to. Last new node on MTR network has been seen 2 months ago. Yes, no new nodes for last two months. Fresh bootstrap is useless.

Ill do it in anyways.

We like it fresh

[mastertrader777]

ETNA Integration Update:

Hello Community,

Stopping by to pass along another ToshiDesk Update:

ToshiDesk/ETNA Back Office now configured.



Paper Trading is now live within ToshiDesk V2.0.



Back Office Orders Tab showing filled trades.



George and Crazywhack, you should now test and report please =)

Added $50,000 USD in each of your accounts.



Upgraded our TimeSeries processes, so data pulls are less than 1 delay. This delay has been optimized down from 13 secs to 1 sec    

Click The Chart Trading now LIVE and configured with (0.00000001) precision ordering

Simply click the chart where you wish to trade, set your trade preferences, and initiate your trade quick and easy!



Hope you guys like our updates!

Show your social media support!

Rewards:

Hero	20 MTR
Sr and Full	15 MTR
Member	10 MTR
Jr.Member	5 MTR

I will honor any type of supportive tweet in the nature of Exchange Request for MTR. ( Poloniex, BTER, ETC  )

More updates soon,

MasterTrader777

Bump

[crazywack]

Awesome I'll check it out tonight!

[mastertrader777]

Awesome I'll check it out tonight!

Look forward to your testing feedback.

After we work out the minor tweeks all markets will be available for paper trading...just as of right now test paper trading with TEST/BTC.

Let me know if you have any questions, and if you don't mind posting your input here for the community to see.

Cheers,

MasterTrader777

[chrysophylax]

ETNA Integration Update:

Hello Community,

Stopping by to pass along another ToshiDesk Update:

ToshiDesk/ETNA Back Office now configured.



Paper Trading is now live within ToshiDesk V2.0.



Back Office Orders Tab showing filled trades.



George and Crazywhack, you should now test and report please =)

Added $50,000 USD in each of your accounts.



Upgraded our TimeSeries processes, so data pulls are less than 1 delay. This delay has been optimized down from 13 secs to 1 sec    

Click The Chart Trading now LIVE and configured with (0.00000001) precision ordering

Simply click the chart where you wish to trade, set your trade preferences, and initiate your trade quick and easy!



Hope you guys like our updates!

Show your social media support!

Rewards:

Hero	20 MTR
Sr and Full	15 MTR
Member	10 MTR
Jr.Member	5 MTR

I will honor any type of supportive tweet in the nature of Exchange Request for MTR. ( Poloniex, BTER, ETC  )

More updates soon,

MasterTrader777

Bump

this looks great ...

will be looking at it for sure when i get back to the office next week ...

great work ...

#crysx

[mastertrader777]

MasterSave Feedback???

Thanks for the kind words Crysx!

What do you think about this?

Are the returns fair?

Do you think I should offer a buy out plan at the end of the 3 month term?
 
Cheers,

MasterTrader777

MasterSave Coming Soon!

MasterSave is a service that will soon be introduced to all investors looking to stake higher amounts of MTR.

Please see whitepaper for reference of this service.

(Whitepaper does list that there will be some fees associated with this service...but after months of brainstorming, I concluded that I want my supporters getting all the MTR they've staked and not have to worry about any fees )

Anyone will be able to purchase 1 of 3 plans:

$100$ (3 Month) Plan ( 20K MTR Staking Wallet Hosted on your own Virtual Server )

$200$ (3 Month) Plan ( 40K MTR Staking Wallet Hosted on your own Virtual Server )

$225$ (3 Month) Plan ( 50K MTR Staking Wallet Hosted on your own Virtual Server )

*Plans listed will give you 3 months of Staking with the above amounts shown.

*Plans listed will be purchasable with BTC ( for now )

*MasterSave customers will receive weekly payouts on all MTR staked.

*MasterSave customers will receive Virtual Server Credentials, and be able to RDP into private staking wallet for auditing purposes.
(Wallets will be locked by MTR Administration to prevent misuse of MasterSave funds)


Return on Investment ( ROI ) Break Down:


$100 Plan - 3 Month - GOOD VALUE

20K MTR Staking Wallet - 10% each month AVG stake returns you 2K MTR per month.

( 2K MTR x 3Months ) = 6K MTR on AVG* Return on $100$ 3 Month Plan.

6K MTR @ current value of $0.03 USD +/- = $180.00

ROI in 50 DAYS!!!


$200 Plan - 3 Month - BETTER VALUE

40K MTR Staking Wallet - 10% each month AVG stake returns you 4K MTR per month.

( 4K MTR x 3Months ) = 12K MTR on AVG* Return on $200$ 3 Month Plan.

12K MTR @ current value of $0.03 USD +/- = $360.00

ROI in 50 DAYS!!!
 

$225 Plan - 3 Month - BEST VALUE, QUICKEST ROI!!!

50K MTR Staking Wallet - 10% each month AVG stake returns you 5K MTR per month.

( 5K MTR x 3Months ) = 15K MTR on AVG* Return on $225$ 3 Month Plan.

15K MTR @ current value of $0.03 USD +/- = $450.00

ROI in 45 DAYS!!!


I do have some people messaging me about this type of service, and I'm pretty sure I have some supporters looking to try this.

I'm sure after reading this, you're thinking what about inflation? Well let me ask you, did you think the premine really wouldn't have purpose or that I wouldn't tailor up new services aimed at structured growth?

Plan payment revenue will be budgeted out to pay for the resources to supply this service along with the most important thing here...create more buy support and market demand.

I will dedicate at least 50% of the plan revenue generated from each customer to providing market support ( buy wall support ) .

Membership Revenues from ToshiDesk will also be used to provide extra demand on the markets.

In due time I will have a custom page developed within ToshiDesk Interface to house some type of portal to work with the MasterSave accounts.

Community let me get your feedback on this.

Cheers,

MasterTrader777

[jc12345]

If recompiled the dynamic binary on a fresh up to date Pi2 and uploaded again to the original post. What is interesting is that it compiled with exactly the same checksum hashes which probably means that there was nothing wrong with the first wallet. I just recompiled it in anyways. I also updated the bootstrap.dat to block 240082 (85MB zipped). While I was at it I also compiled a static wallet and added it to the download list, although the script uses the dynamic wallet. The static build you have to download on your own.

PS: The wallet will not connect to the server until the full bootstrap has been imported. You can open the graphical leafpad and view the ~/.MasterTrader directory to monitor progress on growth of the block file vs the bootstrap.

https://bitcointalk.org/index.php?topic=954240.msg11261172#msg11261172

[mastertrader777]

If recompiled the dynamic binary on a fresh up to date Pi2 and uploaded again to the original post. What is interesting is that it compiled with exactly the same checksum hashes which probably means that there was nothing wrong with the first wallet. I just recompiled it in anyways. I also updated the bootstrap.dat to block 240082 (85MB zipped). While I was at it I also compiled a static wallet and added it to the download list, although the script uses the dynamic wallet. The static build you have to download on your own.

PS: The wallet will not connect to the server until the full bootstrap has been imported. You can open the graphical leafpad and view the ~/.MasterTrader directory to monitor progress on growth of the block file vs the bootstrap.

https://bitcointalk.org/index.php?topic=954240.msg11261172#msg11261172

Thats what I'm talking about Jc!

This is a stellar job here.

Thanks a ton

Post that MTR address!

I will add this to the OP as well, just give me until tom - catching some ZzZ's

Cheers,

MasterTrader777