Marto, did you send new invoice already? Speedy still not receive it yet. C'mon marto, my hex run out of time  |
|
|
|
Can you provide company address ?
If not I have to take back the sending and try elswere
I had electrical shop. Maybe you can use my shop name as company name. I will PM you the name & update it on my account address. The rest is same(address & phone number). Maybe you need to specified the HEX16A as USB power supply @ 10 EUR each  If fail, then send it with bgpost |
|
|
|
Yes
I do not understand
I think I'll have to change the shipping company for outside EU
Yeah, please do what you can. But then does it's mean the parcel still in bulgaria ? I think bgpost is best choice. |
|
|
|
Marto, i just receive this mail from office. Is this the latest status? Dear Customer, This is what I just got from carier: Hello ,
Both shipments to the U.S. and Indonesia have been detained at customs because the devices are considered higher than normal USB port
and also can not be taken for personal use of an individual in these countries. This is because they have a greater number and variety of
standard flash drive.
Can only be sent to a company with pro-forma invoice. Please let us know if you can specify to both company receiving shipments and
send us the adjusted pro-forma invoices .
Please your urgent response and assistance , otherwise if items will not be cleared .
Regards,
Iliana Ivanova
Responsible call center of Sofia and Plovdiv
SPEEDY
Regards, Customer service |
|
|
|
Marto, did you manage to go to speedy office yesterday?
What is the update?International Oct 30 at 2:35 PM Hello, The document was provided yesterday and the parcel left Bulgaria on the same day. Best regards, Magdalena Shishkova International clients specialist Speedy JSC 0 7001 8001 www.speedy.bg |
|
|
|
Invoice sent last week
I'm going to get there today in person and update you
I am really appreciate this marto if they still make problem, cancel speedy & send it using bgpost. |
|
|
|
Marto, speedy said they still not receive the proforma invoice. What exactly happen here  Now tell me how are you gonna do about this? Магдалена Шишкова Oct 28 at 7:11 PM Hello, I’m very sorry for this situation, but the parcel cannot leave Bulgaria without the Proforma Invoice. As soon as we receive it the parcel will be transferred. Best regards, Magdalena Shishkova International clients specialist Speedy JSC 0 7001 8001 www.speedy.bg |
|
|
|
I feel bad for you dude..... Because you are knowledgeable person and you know what to do which means that you will enjoy them working .... Thanks dude, this is the reality that i must accept. |
|
|
|
Hey,
No chaining is available for the moment as far as i know.
Thanks for the info loshia  But i guess i will never see my 2 x HEX16 |
|
|
|
don't worry Zich,
it take a week to get my HEX16A via speedy.bg, and i localise in same country as Marto.
don't be rush , take a coffee and chill a little if you can.
that is my advice, but you do what you want.
Regards.
No, speedy.bg refuse to send my parcel from bulgaria without low cost proforma invoice because may country is not part of EU. My parcel already in their office from October 15. Speedy.bg keep asking for low cost proforma invoice. This is ridiculous, but i think speedy mine BTC with my HEX16  Hello, I’m very sorry for this situation, but the parcel cannot leave Bulgaria without the Proforma Invoice. As soon as we receive it the parcel will be transferred. Best regards, Magdalena Shishkova International clients specialist Speedy JSC 0 7001 8001 www.speedy.bg |
|
|
|
Marto, speedy said they still not receive the proforma invoice. What exactly happen here Now tell me how are you gonna do about this? |
|
|
|
New TPLINK TL-MR3020 image just added: Link: FactoryLink: SysUpgradeWhat news: 0.0.5:
* cgminer updated to 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75
* cgminer patch to cgminer 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75.patch
* openwrt updated to r38461
* add cgminer monitor script
* stay in sync with official cgminer git and build fresh openwrt images
* add auto frequency adjustment support avalon-auto style
* add configuration options (voltage and clock) per board based on HEX16A serial number
Best results in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock
|
|
|
|
|
Hi, chaotz. I remember marto said that HEX 16 can be chained to run off one USB host.
|
|
|
|
every think is OK. now but i somehow do not find wifi config in there. Do not enable wifi because it's can cause problem |
|
|
|
Really? I am glad to hear it  Yup, but router only for mining purpose only. Many feature should not enabled |
|
|
|
 You are a real hacker dude. By the way did you get your hex already. I would like to know if all is good with tp-link. 10X No, my hex still on speedy office because of document problem. But many said it's work perfectly & super stable |
|
|
|
the lan is not going up at all.
glow only power !
when go home will try recovery via serial.
That was normal because many feature are disable including the LED indicator. Telnet also disable, connect only from web for the first time. |
|
|
|
this brick my MR3020 v1.8  Default IP is 192.168.0.99 |
|
|
|
Sorry for the delay
The invoice required is sent to speedy
Thanks a lot marto |
|
|
|
|
Show Posts
