if you can get any of vga today, you can build what you want

but there is almost no vga on whole internet

Dual mining Claymore 9.5 ETH/ SIA -DRCI 13

Stock out of the box a disappointing but steady 22 MH/S

Copied 1500 strap down. Set TRIXX Clock 1100 Memory 1775. Now mining steady 25.4

Any suggestions to squeeze more out of this Elipda memory card? When I pushed it over 1775 the hash went crazy lol. Just all over the place. At 1900 I lost video and she crashed.

Thanks for any help....

I understand what you all are saying, some chips can't clock as high as others; but I would think the same chip at the same clock rate with the same memory and timings should perform the same.

My hashrate on nanopool looks like waves, up and down. What could be the reason for that?

Got it figured out, Polaris wasnt resizing correctly so teh timing field was hidden below the taskbar. Copied the 0:1625 straps to 0:1750 and 0:2000 in Polaris 1.5 and when loading it and rebooting the name of the Video device in ATIWinFlash changes to 'ATI Radeon Polaris 10" and claymore cannt see it.....

Edit: Re-ran the atikmdag-patcher and it recognised the card correctly again however no change in MH/s.

Hello!!  I have also been looking for Wolf's 2014 CPU miner.  I have not seen a link posted here.  Did anyone get a link from private message?  Could you share with me?  Thanks!! 

My problem is when I add 4th graphic card my loading page comes like this:

I have tried "above 4g" but system goes to a boot loop with no picture.

I was being a bit too ambitious, the rig stalled and stopped reporting after around 3 hours!

I have dialed it back a bit!

dgs2001

Hey, I need some knowledge help here!
I've got two ASUS RX 480 strix 8gb, samsung memory, cards and every time I copy 1750 strap to 2000 and flashi it, GPU-z loses its function to read info. No clocks, temps, no nothing. Unable to set clocks in wattool or afterburner. Where is the catch ?

What is uber-mix ? where do i copy it, to 2000 stap?

Wolf0,  What would be the aiming hashrate range for a MSI Armor 4gb (hynix memory) and how many watts of power?  

I'll try to play using Matthew's guide (https://bitcointalk.org/index.php?topic=1954245.0)

Thank you =)

Hello guys, I Have 3 Sapphire RX580 Nitro + 4GB (23mh/s stock), with Hynix memory. I have change the options (Copy 1:1500 to 1:1625, 1:1750, 1:2000 and the 2:1500 to 2:1625, 2:1750, 2:2000), but again, 24mh/s.. Only modified the Power Draw (155 to 132w).. Pls, anything option I change to work with 28~30mh/s? Thanks!!!

A few more words... NOT ALL CHIPS ARE BINNED EQUALLY!

I have been lucky enough to come across SEVERAL Sapphire boards from all generations since the 7000 series that were GOLD chips... always clocked and mined higher than almost any posts you find here.

But this year has shown me that luck will not always be there.

We own 9 R9 390 OC Nitros and 3 of them run like screaming demons covered in permafrost at 33+MH/s on ETH and 29+ with 430 on PASC dual mining @ 1200/1800. 4 run average and stick at or just under 70C and above average OC/hashrate, can get 1175/1750 stable and 32+ or 28/425 dual. 2 are just fucking scary and I cant keep their temps low or clock them up at all... even for basic gaming. They went into the kids PCs to hash alone when not in use but still get close to 80C in the A/C ugh, they keep stock temps and zero extra power and still hit 28MH/s and 26/375 dual. On ZCASH, they run cooler but only get a little over 400 sols/s which is not as profitable.

We own 3 EVGA Geforce GTX 1080 TI FE cards and two of them act like they do not know what 70C even is... hash at ~750 sols/s each. The third is scary though, and it runs 10C hotter than the other two. All three were purchased at the same time and arrived at the same time but 1 was definitely a lower binned chip. It hashes slower when compared to the other two, even when I run it in the direct A/C and keep it under 75C.

Sometimes, some cards of the same version are just better than others. That is what binning is for... to find the best chips for each tier of card being produced.

I assume you get that with highly tweaked timings? I was only referring to simple, heavy-handed strap copying.
What's your power consumption?

With luck, BIOS modding and overclocking you can potentially achieve 28 MH/s at a very nice power consumption wattage.
These facts are the only ones that matter, and won't change with any AIB RX 570 you get.

I'm having six Asus Strix 8GB RX580 cards delivered next week and would also be interested in exact settings that work well.

How much MH/S can i get from this card for ethereum mining. Is it preferable?

I have seen modify Bios for RX580 many version. 
I have XFX RX570 4g.  Not modify bios, mining ETH at 26.5M

I try to modify bios as copy 1:1500 to line 1:1650 to 1:2000 and 2:1500 to each line.
It is not working.   


Please comment on RX 570 Thanks in advance.