Thx, yeah those are just the basics.

Wipe drivers using this: http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
It will also block auto install driver.

We already have topic about this mobo: https://bitcointalk.org/index.php?topic=1939165.0
It wasn't working good, someone says it crashed with 8 GPUs I think.
It could have 14 GPUs, but H110 spec says no M.2, so I'm not sure... also there is only few pcie lanes, we were talking about how that could work, nobody was sure.

Sry my bad... I was looking at another profile -_-
I mean make your preorder you can return them always.

Depends on what memory vendor you have?

How do you know he has all Hynix cards? I can smell the softbricked cards
I made an easy tutorial, it's in my signature if the OP want make bios for each card.

Since UK is still in the EU you can always return them in 14 days or cancel the preorder if you will have better price.

No, only few cards have 2250.

If this helped you, don't forget to hit +Merit. Thanks

Lot of people asking how to mod RX bios. There are 2 ways the easy one and the proper one.
I will show you the easy way. This bios modding is easy for newbies. This bios mod tutorial is for memory intensive algos such as Ethereum, Monero, Dubaicoin, etc.
Undervolting will only work with Windows.
If you need undervolt bios for Linux you need to do the harder way. You can ask here, someone could make it for you. I know that masters Eliovp and Wolf0 can do it.

If you need help, buy me a beer I can help you. Write me on e-mail monerobiosedit@gmail.com
What I can offer:

• Performance timings for all GPUs
• Bios mod
• Support

---

Buy Mining Bios With Performance Timings

You all know I don't like this... but since most of you want this and I don't have time to mod bios for all of you. You can now buy it prepared for mining. It's undervolted and uses performance timings! Prices are as low as $5. You can pay only with crypto.If any problem contact me via e-mail monerobiosedit@gmail.com, the payment system is tested so hopefully there will be no problems, if the payment will stuck contact me I will aprove it manually.

https://mining-bios.eu/ - The one and only Mining Bios shop running by Mattthev

There are more and more fake shops that they try to look like https://mining-bios.eu/ and probably try to scam you. Always check for the right address https://mining-bios.eu with SSL lock. Also look for McAfee badge, Shopper Identity Protection and Cryptonite green shield!

NEW affiliate system with 10% commission rates for bios and PBE purchase. https://mining-bios.eu/2018/08/10/affiliate-program-for-mining-bios/

Discount coupon
indeedminers10 - 10% discount on bios orders of total 15 USD and more.

Always check the link, SSL lock and McAfee secure sign, there are few fake shops that might try to scam you. They have almost same design and pretty much same bios and PBE offers...

---

Check Active, Upcoming and Past ICOs. Mining-Bios.eu now has ICO list! DYOR for all ICOs at one place!

---

Drivers

For best ETH performance you need to use drivers with compute workload for Windows 7/10 and for Linux blockchain drivers

Blockchain Drivers for Linux
AMD Radeon Adrenalin Edition 18.6.1 - these drivers need to be switched to compute workload Do not use newer drivers! Not working with many miners!
Blockchain Drivers August Windows 7/10 1703


VEGA 56/64

Guide How to Flash VEGA 56 -> 64 + Bios Download + Mods
VEGA Guru3D thread + Bios download - VEGA 56 -> VEGA 64
Bitcointalk VEGA thread
Reddit mining thread VEGA 64 43.5MH/s 130W

Vega Mining - A Consolidated Guide
VEGA 64 Oldcomer's youtube guide
VEGA 56 Hellae guide Bitcointalk
Monero and Vega - the definitive guide by Hellae
VEGA 56 Hellae guide Reddit thread
Reddit Wattman settings
Album how to mod VEGA 64
VEGA 56/64 Video BIOS Collection

Softpowerplay voltage mod guide by Hellm


Basic Performance Timings for Elpida/Hynix/Micron/Samsung for RX


Free performance timings for Hynix H5GC4H24AJ for testers! You need to know how to use PBE or SRB I also need feedback on that. Send me an e-mail monerobiosedit@gmail.com

Guide: How to Mine Monero / Sumokoin and Other Cryptonote Coins + Miners Download Links ⛏
Guide: How to Mine AEON Cryptonote-light + Miners Downloads ⛏
Guide: How to Mine ⚡ Electroneum + Miners Downloads ⛏


How To Mod Polaris Bios AMD RX 470/570/480/580

Tools
Polaris Bios Editor 3 PRO - This build includes my timings (better than the original and those free in this thread) it's more intuitive you can choose optimized timings for XMR or ETH, it auto applies customized timings for 4GB or 8GB cards and include several options such as power saving. More info on the link.
Polaris Bios Editor 1.4.1
Polaris Bios Editor 1.6.7 - our reupload, safe download
Polaris Bios Editor 1.7.2
SRBPolaris Bios Editor V3.4
AMD/ATI ATIFlash 2.84
GPU-Z 2.7.0
ATI Pixel Clock Patcher 1.4.6
DDU
HWinfo64+32

OC Tools
WattTool - working on old drivers up to 17.7.1
OverdriveNTool - like WattTool for 17.7.2, blockchain drivers and newer (Adrenaline)
Afterburner 4.4.2, use 4.4.0 BETA 12 for 17.6.2 or older drivers

Benchmarks:
GPU & CPU BENCKMARKS FOR MONERO MINING!

Check what memory vendor you have with GPU-Z. This is Samsung.




Download newest ATIWinFlash and save your bios.




Start Polaris Bios Editor or SRBPolaris. Open the bios.
SRB Guide is under PBE guide, this forum doesn't support Spoiler tag so it's little bit confusing.

Polaris Bios Editor 1.4.1




Copy performance timing. For Samsung is best Uber-Mix 3.1.
First post -> RX Performance timings. It can be used for RX 470/570 and 480/580 4GB or 8GB. Use it only for Samsung memory.
There are performance timings for all vendors Elpida, Hynix, Micron. You can google some of them also you can make your own. Basically it's just normal timing strap from card with tightening timings for better performance. It can be decode to values in SRBPolaris for example.

If you want good performance timings you can write to me I can sell you them. For all memory vendors.
EDIT: Basic Performance Timings for Elpida/Hynix/Micron/Samsung

Beware of space before the strap while you copying the Uber-Mix 3.1 from original web!

Copy it to 1750 and 2000. If you have more straps like this 1:xxxx 2:xxxx, you need to copy to the right one. In VRAM section, there is dropdown menu the Samsung one start with K, Hynix with H and Elpida with E. First one is 1:xxxx second one is 2:xxxx, SRBPolaris showing exact name of memory vendor.




You can higher or lower TDP if you want. Max memory clocks or vcore.

Undervolting
Do not put static voltages
Voltages like 65286 means they are dynamical for every card based on ASIC quality mostly. So you can flash the bios to all same cards (memory vendor) and it will work, every card will have similar voltages, some lower some higher.
The trick for easy undervolting is put lower values than it is. Voltages need to be equal or higher than the previous on.




Example from other forum how it could be




If you set clock in Afterburner or whatever you will se what voltages is that. Do not lower voltages too much in bios, you can always undervolt in Afterburner. Once you will know what voltages are stable you can put those dynamics values right for your card.

Also you can lower VDDC (VRM).
You can put values like 1000, 975, 950, lowering by -25mV. 975 and 950 should be stable on every cards, you can set 850 but this could be unstable. If you put lower voltages only to higher clocks it will always boot but in utilization it could be unstable.




There is lot more to change but this is basic and it's mostly enough what you need.
It's mainly meant to show you what is performance timings and how to do easy undervolt.
Save the bios and flash it with ATIWINFLASH -> continue under SRB guide.

SRB Polaris V3

Open your stock bios. As you can see this one has 2 memory vendors. First is Samsung and second is Hynix. You can clearly see what memory vendor you edit, no 0:xxxx, 1:xxxx and 2:xxxx anymore.




If GPU-Z says Samsung edit only Samsung. If it says another vendor edit only the one!
As I wrote before, copy the Uber-Mix 3.1, 3.2 or other performance timing you have, if you have my pack copy it from the RX Timings txt file. I recommend you to use tweaked Uber-mix 3.1.1 from my pack for Samsung. Copy it to clocks you will use. So mostly is enough 2000, but you can copy it to 1750, 1900, 2250 basicaly all these high clocks.




If you have Hynix, use the timings table for Hynix. Micron-Elpida means Elpida. Micron is Micron. Do not put Uber-mix or any other performance timing to other vendors! The timing pack you have from me is divided for all vendors so refer there for proper timings. Also read the info if the timing fits for 4GB or 8GB, if it's not stated it fits to both. Not every performance timing will work with your card good. If the card is not mining well, system crash or miner crash, try other performance timing from the timings file. If you still have problem, simply contact me on e-mail.
EDIT: Basic Performance Timings for Elpida/Hynix/Micron/Samsung




Here you can set clocks, 1411MHz is good for gaming, not for mining, only if you don't care about power consumption. For higher hashrate you can set around 1300MHz, optimal hashrate/watts around 1250MHz, for best power consumption around 1150MHz.
Memory clocks should be higher than 2000MHz, but bad cards can't run it. If you have Hynix 8GB with my performance timing you will need to run the card above 2200MHz for 31+MH/s. In bios set max 1900-2000MHz, OC the memory with utility like AfterBurner or WattTool to the max and check for memory errors in HWinfo64!!




If you changed core or memory clocks you will need to save the bios now and open again. You can undervolt memory voltage controller, use the dropdown menu. 900-1000mV is mostly safe, if you want best stability leave it 1000mV or 975mV, 950mV.




Core undervolting is bad here. You can put static voltages but it's not much safe. Lower last digit by 1 or 2 if you lower the core clocks or they are under 1300MHz you can put there 65286, if your max core clocks are lower than 1250, you can even put 65285. PBE 1.5 is better for this kind of undervolting.




You can edit Wattage here. You can adjust little bit the Power limit, if you undervolt or you will in utility there is no needed to edit this at all, only if you want OC core to the max. Not applies for memory OC.




Bonus
On the timing tab if you click on STRAP EDITOR, you can explore the timing strap edit it and make your own timing strap.




Flash the mod bios

Save the bios and flash it with ATIWINFLASH
Load bios and click program. Your PC will freeze for few seconds so patiently wait!



After flashing your card uninstall AMD drivers with DDU!
Reboot and install new drivers and Pixel Clock Patcher Without patch your card will have error 43!
You can rename Pixel patcher to atikmdag-patcher-bios.exe it will than only install signature patch!
Reboot.
You will also need set cards to compute workload

Memory OC and memory errors

Start miner or stability test.
Start with stock clocks than you can raise memory clocks by 10Mhz steps, every few seconds.
Download HWinfo64 and check for memory errors! Once you have some errors lower clocks a bit till there are no new. This clocks should be stable. After you find best memory clocks you can set core clocks (overclock or underclock) than you can try lowering voltages. Also you there shouldn't be artifacts!

http://www.pcworld.com/article/250644/how_to_overclock_your_graphics_card.html

Find your GPU and the GPU memory errors line. Watch it for numbers. If there are any after few minutes your memory clock is too high. If you have few errors after hours it's no problem. But key is to have 0 errors. Memory errors can cause bad shares!


With performance timings you can have 30-31MH/s with RX 470/570 and 31+MH/s with RX 480/580 (It could be 33+MH/s If you have bios from Wolf0 or Eliovp!)
This is max you can have not every card can achieve it! Most cards can run above 28MH/s.

Quick video how the modding in PBE could be:
https://www.youtube.com/watch?v=fAgZbK0XVec

XMR: 800+H/s on 470/570/480/580, I don't know why, but 470 hashing more than 480
My XMR hashes with XMR-STAK-AMD
RX 470 Samsung 870H/s
RX 470 Elpida 835H/s
RX 480 Samsung 845H/s

SGminer GM 5.5.5
RX 470 Samsung 915H/s
RX 470 Elpida 890H/s
RX 480 Samsung 920H/s

My ETH hashes with Claymore (stock config)
RX 470 Samsung 30MH/s
RX 470 Elpida 29MH/s
RX 480 Samsung 31MH/s

Customers reports:
RX 470/570 Samsung 30-31MH/s
RX 580 8G Hynix 31+MH/s
RX 580 4G Hynix 30MH/s
RX 580 Samsung 31+MH/s
RX 580 Micron 29-30MH/s

About the same results for Dubaicoin (DBIX)

Update
JULY 2017: Due to hashrates drop are current hashrates on ETH lower!

Hope this could help someone, there are lot's of other tutorials and videos on youtube, but none of them what I saw used performance timings...

My email: monerobiosedit@gmail.com

---

Donations:
ETH: 0xA266f3158E84A70Cd2AD2cE9F0Da3143C0392A73
BTC: 36aU6vUWxTG7UigKEpZzXmB6k6jy2D7xVY
XMR: 4A6G5JmSNiULxE2BeuobfTaMFC2LcLJQ4XwQpgzUf7GMFjKGFzBz1N42538xQ4XZire1pN4veMniiWn Fw62YV5GsV1hVz26
LBC: bUjyDMPwaE8GYGiat1P2jufSuef3ahE7Sm

You can use my referral links and trade on these exchanges as a thanks for this guide if you don't want to send me any crypto.

HitBTC - lot of new coins start here
Next.exchange - Decentralized exchange
Binance - one of the best exchange now, everyday open for registrations for few minutes
Livecoin - Accept registrations
Kucoin - still accept registrations!
Cryptopia
Altcoin.io - decentralized exchange

Upcoin - New exchange starting in March, sing up bonus $500 for trading fees is paused now


This is my tutorial. It's not the best. I hope it's understandable and with no mistakes. Any tips for improvement appreciated!
I used some images from other forums.

Last edit: 2018/11/03

Second bios probably.

Yeah this should be point out. Need to be gaming laptop! Also cooling pad is recommended.
My has 2 fans (CPU and GPU) and 1 big copper heatsink with Arctic MX-4 thermal compound.

Of course it can't handle 24/7, but most gaming laptops are made to be run at full few hours a day. So if you switch these hours from gaming to mining it can make some profit I repeate XMR is profitable even on CPU... and also you won't destroy it.

PM, me if you want bios mod.


PM, me.

Sure you can, RX 470/480/570/580 no problem, if you are running windows you can also use Nvidia and AMD.
Right now I have R9 380, RX 470 and RX 480.

I have Acer V15 Nitro Black Edition, i5 and 860m
269H/s with XMR-STAK-NVIDIA
Do not mine 24/7, RAM isn't important... VRAM matters for ETH. XMR needs only about 1GB.

Well no... When I'm gaming on my laptop I have 80° on CPU and GPU, sometimes "great" turbo boost make it 85° on CPU... So with less than 65° on GPU while mining and 60° while mining with cooling pad it's much much better for the laptop than the madafuckin gaming. Also it make some profit, gaming not...

I'm mining Monero and I have whole rig for profit. This is just while I'm not using my laptop... I've started with mining on laptop.
You can make some profit with that... if he has something like 1060m or 1070m it will hash good on XMR.

He specifically said: "I don't care too much about profit"

It's fine no problem with that. Temperatures should be lower than you are gaming.
I have 860m temp around 60°C, mining when I'm watching movies. If your laptop is made for gaming the mining do less harm. Also you can make it better with cooling pad.

You never know what voltages your card can do... Also memory can't be undervolt only memory controller. Performance timings is the key.
My Strix RX 470 has 29Mh/s, could be 30 with better quality Elpida memory.
I pretty love Strix cooling. It's very quiet and I don't have any trouble with temperetures. Asus Dual has very bad cooling.

Very good tought.