That's how but what does it do ? .  I Don't see were it did any thing on CKpool .

honestly, I'm not having any issue with my Gblack it runs 24/7 if I let it at 25 to 27 MH with exonance enabled with BFG 5.4 in place of the 5.1 i think is default in minera , i have posted how before . i can use a proxy or just minera I'm fine .



cya

I don't mean to kill a sell i know you not worry


why not this ? This one is truly plug and play . better then a ATX but the same and the break out board is awesome.

http://holybitcoin.com/product/hp-1200-watt-common-slot-psu-bundle/

it's super easy to plug in, all hell need is a plug for were he lives at, it's instant a 900 watts on a 120 line and a instant 1200 on a 220 there is no noise hocked  up to 2 S3 if it s on a 220 line , two S5 it can get  rather annoying with noise .

AWESOME

Luke

question does this  mean i can compile it on a PI then tar it then put it on the S5 then run it .

BFGMiner must be compiled for and run on the embedded controller

I want to use BFG on my S5 right now i don't care how i do it .

Smit1237 said he would put one to gather for us in a image , till then do it like above . i know what the command line is, if so  .other wise, I'm lost till i learn more  .

Im on nice hash right now with my amd card and isuing those driver but using sgminer inside that folder is a runme.bat  that does its all for you all you have to do is  edit the sgminer-profitswitch.conf and put you BTC adress in place of the ones in there . then run the runme.bat, i did try to mine script with my amd and bfg 5.4 it just won't cut it any more .


GPU 0:  75.0C 2799RPM | 7.074M/7.211Mh/s | R:  0.0% HW:0 WU:0.081/m xI: 64

GPU 0:  76.0C 2780RPM | 7.472M/7.477Mh/s | R:  0.0% HW:0 WU:0.110/m xI: 64

got a  little more out of it kept about the same temps

you also may have to change one or two setting in the sgminer-profitswitch.conf for the fan and heat . my amd card did the same it wouldn't hash using BFG and script only .

I not even OC right i can polly get that up to 8.1 MH and stay around 75 to 76 C with water cooling even higher .


to me 76 C is to hot , I m not going to water cool it no need to . i don't plan to GPU  mine unless it starts paying big time which might happen sense the EU declared Bitcoins to be a form of cash .



The amd  driver version 15.10 Beta which is the CC version with the drivers version 15.201.1151.1005-151012a-295347E-ATI ? .


GL for now that's about as far as I'll take my Video card .

IF this keeps up count on them being very close if not to 300 by next week , I'm just worried what a 1000 K coin will do to us in the US , how the GOV will handle that , i know they will give in sooner or later or cause some thing they don't want they won't let that happen they will work  it out like they have in the past they proved that with the last shut down.





Cya

Sorry man i didn't mean anything but it , but I came form gaming website it is really bad  on those sites. I was impressed when i came here respect is  kind of a unwritten rule here or has been for the last two years, Ive  been here .  my bad sorry.


I didn't intend for this post to get any post just reads , I'm excited to see the climb keep going, by now in the past it has gone back down .  .


SO excuse me Please .

i sorry i don't like to follow charts to much, i follow real time prices more ..

Sigh so and your perfect !! . that's one big reason why i love these forums there is a lot of respect but from time to time some one just has to correct some one and they are more then likely worse off then the person they seem to have a need to correct . .


I was just giving a positive out look  on how bitcoins keep climbing .


cya

to me this is prefect how it keeps going .

 

I would settle for a 400 /500 dollar sable coin sure we all would like a 1000 or 2000 $ coin but would that be safe .

tittle says it all i hope it keeps up   . not to fast and not to slow stays just like it is .

not them very bad idea don't do per orders first rule  buying any thing  like that , and not off them they being taken to court for stealing .


or was that hash fast either way one rule don't do  per orders unless you know for a fact that it is real  or like a company like bitmain etc .


A lot of miner have been ripped off for 1000 of dollars doing per orders so be very care full with PO all most any one on the forums with tell you that as one rule to follow.


 that was hash fast sorry

http://arstechnica.com/tech-policy/2014/11/its-all-over-bitcoin-miner-maker-hashfast-to-auction-remaining-assets/

I don't know much about hash coins



that replaces maybe 10 amd cards you can Polly buy for the same amount now it uses, less power at the wall by the way it looks but it's a per order, is the only set back, so it is real  .

my bad four and half amd Cards, i have, clocked my two amd cards minning off Script and got them to 7 to 8 MH each with no heat issue no hard error etc for a day or two just to see how it is now .



hope al lthis helps some how .  one rule to follow or do it at your risk no per orders unless you know it's real and know you can trust it , just a tip ....



PS last thought look for one these for around  500 or tad higher , you may have to shop for one but i  have seen them for as low as 500 $ . https://bitcointalk.org/index.php?topic=1211490.0

if i had the cash then I would have bought one   .   you can still do a ROI with one of those, if your in to that or want it., it takes planing and work, but you can .



CYa

yup with a lot of GPU if your going to do GPU mining and  want to mine those coins it's all about what coin you want to mine that decides what hardware and software miner you use .


as far as i know any AMD or nvida card will mine any coin but some coins you Polly can't due to the Diff is to high for those , at one time i read some place with a video card some were mining 200 btc a day and  had the Sense to mine them and hold on to them , i was a fool back then , i had the hard ware but like a lot of others i thought is was BS, so I lost out then . or I'm sure like them i would have 100 btc miner mining some place begin hosted if i wast renting some place my self and watching it all . making a lot even now .

I read some place  that why they did it , why i said once i find that . I post it and why they keep changing it, if some one find a ways around it, so GPU mining can be good etc it not really stuck like that it is intended to prevent abuse and so only one type of hardware can use it .KNc figured how to mine any scrpit with a normal script miner :)unless  i was informed  with a firmware upgrade, so it lets them mine any script. it maybe stuck for that miner but he can't mine any thing but script coins labeled script no other algorithms with Zeus Miner or any ASIC Scrypt Miners can  but kncs that i know of .




I see and know what you mean .I was just giving him the real reason why , at one time you could mine any script with any script miner till someone had the fore site to see how it would total destroy the use of GPUs to mine with .  a Little late it all most did or did but you can make something off GPU mining, if you want to build the rig/s for it .



Maybe i miss undertand what he asking . but the question is Can I mine n-scrypt with zeus miner? the answer is no .

you are right there to .IM more a laymen type terms guy i understand it all just like to talking in the simplest terms i can .

No it won't, i  have tried to mine any and everything Script with zeus miners and the only one that works is Script no off algorithms of Script like X11, X13, X15, Quark, Lyra2REv2 n-scrypt etc .

they are made to run off CPU and GPU only so no one abuses Script mining with ASIC Scrypt Miners and try to keep CPU and GPU mining a live  , the only ASIC Scrypt miner, i know of that can do any Scrypt is KNC's titan, but it has limits with those  Scrypts. I'm told, so not even sure with them, they cost to much, i can't afford one at 3 k, that's more then likely a used one.

 I'll stick with BTC mining and use what few Scrypt miners, i have from time to time .

but you can try .

at one time BFG was awesome to GPU mine with I even used to with BFG but as time went on ASIC miner were tweaked and dev , so was BFG and CG .  


that's said you can still GPU mine with some version of BFG but it maybe super hard to get it to work right but it is still poss but look  here https://www.nicehash.com/index.jsp?p=software#gpu  you might be better off using sgmnier . it's way easier to set up and is made for GPU mining. BFG is made more for the ASIC miners and i would honestly not do script mining with a GPU do one of the script algorithms X11, X13, X15, Quark, Lyra2REv2,  they are made to only work with GPU s, some of the very high end ASIC Script miner can mine any kind of Script but those miner cost to much to be worth it .


BFG may not even support script algorithms X11, X13, X15, Quark, Lyra2REv2 etc anymore or may never have , to benefit from Script mining with a GPU your are better off using SG miner with one of the those script algorithms, .


BFG and CG are made for  ASIC miners now, BFG does both algorithms SHA256 and Script while CG only does SHA256, it used to do both, Script was removed from CG a while back, BFG is the only Software miner that has fixes and version changes now that supports both algorithms for ASIC miners, SHA256 and Script, more then likely all ways will, which makes it nice .


SO if you want to use BFG for Script mining with a video card, go for it   . if you can get it to hash it may not being the wrong software miner at one time it wasn't  and unless your doing it for fun or to learn ,it is a total waste of time with BFG now unless you use a forked version of bfg  .

http://www.ebay.com/itm/Bitmain-Antminer-S1-Bitcoin-Miner-Great-Starter-Miner-SHA256-Priced-to-Go-/291594776399?hash=item43e4672f4f:g:DkkAAOSwFnFWDY2K



your nest bet if you live in the US . it looks like the cheapest one on Ebay with or with out free shipping .

what about the A2 chip they only mine Script and seem to be about the same power use but only do Script Ming   if you shop around you can get a 110 A2 at 28 nm chips for like 500 $ but shipping kills that deal unless you can find one with free shipping or close to you . they are big and heavy like the Zeus miners or G blacks and just as much noise but they can be controlled a lot better for less noise.

this weekend i think luke said he is going to  release 5.4 BFG  that adds S5 support the problem IS i don't know the first thing yet about recompiling a image with a new thing in it other then windows and running Windows IoT on a s5 might indeed be poss but its not stable enough yet (Windows IoT that is to do that ) , and Until, i know more of how to, is anyone going to to add it to lets say to the May image, I will test it in one of my S5 at my risk, as long as it is stable enough and with in reason won't mess it up or break it  beyond recovery , i do have a back up laying around but would hate to replace that controller, i have tested the beta version of BFG with S5 support, so i know it works, i know there is all ways that 2 or 3 %  with any thing .  



I do know of another way of replacing some files in a S5 that live thu a reboot but would rather have the image to be safe unless some one can replace it or has figured out how to with just importing it into a S5. the even safer way .