Look at your left side there is menu with links it has some place blocks times who found what block and under account all your translation going on right now. . anyone that cares i got my 3 470 back up and running for a hour or two 20:19:14 pool : submitted and accepted 20:19:17 main : zec-sa#0: 33.7S/s zec-sa#1: 30.1S/s zec-sa#2: 30.5S/s total: 94.3S/s 20:19:22 main : zec-sa#0: 32.7S/s zec-sa#1: 24.9S/s zec-sa#2: 29.5S/s total: 87.1S/s 20:19:27 main : zec-sa#0: 30.2S/s zec-sa#1: 35.0S/s zec-sa#2: 31.4S/s total: 96.7S/s 20:19:32 main : zec-sa#0: 25.5S/s zec-sa#1: 27.1S/s zec-sa#2: 30.7S/s total: 83.3S/s I'll know for sure at 8am est usa time if it was a pool or some thing else , thanks cya
|
|
|
Guys I change mining pool to www2.coinmine.pl/zec and I dont understand My balnace infomation. My Balance: Confirmed: 0.0001 ZEC Unconfirmed: 0.0069 ZEC Round earnings est: 0.0002 ZEC what does it mean? how it works? Please help Confirmed: 0.0001 ZEC this mean your balance Unconfirmed: 0.0069 ZEC what's waiting to go in your balance in the confirming stage by that it so many agrees before it yours Round earnings est: 0.0002 ZEC thios how i do i explain that to make sense expect to say it's what being confirmed best way i can explain that one some I'm sure some can explain that better. .
|
|
|
RX 470 going to 170 i think for the 4gb card if the 8gb goes down with it that puts it at 190 or so and rx 480 didn't see a price drop were i looked some one else saw it to .
guess 490 will cost out the ass at first if when it comes to make up the difference. Nvidia trying to take the number 1 and 2 spot . law suit time unfair trading will they ever learn .
|
|
|
his my R9 280 not the x version on https://www2.coinmine.pl/zec/ with no cpu coes on i;ll turn them on once i replace the cpu cooler .so it gona hit close to 40 with cpu cores and it never run that good on flyppool and i want to use flypool that's after a few hours , i still working on my 470 rig 3 cards i had to reformat due to many error and crashes and disconnects. 16:07:03 pool : submitted and accepted 16:07:07 main : zec-sa#0: 32.9S/s total: 32.9S/s 16:07:12 main : zec-sa#0: 33.3S/s total: 33.3S/s 16:07:17 main : zec-sa#0: 31.1S/s total: 31.1S/s 16:07:22 main : zec-sa#0: 32.5S/s total: 32.5S/s
|
|
|
My 7 card machine has been stable for a good couple hours now on 0.6 at Flypool using two instances. Four Hawaii cards on one, two Tahiti and one Pitcairn on the other. Huzzah!
Great i wasn't and haven't been for a while i would rather use flypool but im gonna hold off and use what works for me . just saying that might be why for some try a different pool, don't blame the miner any more , i mean you can but more then lily it's not the software miner any more, it was but not now . this is three cards on coinmine.pl/zec/ there im able to turn on CPU cores and it doesn't drag down my GPU's . AVG: 92.98/92.98 H/s i was getting on those three cards if i was lucky on flypool 67 to 70 and it wasn't all ways stable like now .
|
|
|
for those with lots of disconnects what pool are you miming at ? . try a different pool two are having issue right now or seem to be nicehash and flypool i went to another pool and no down time yet using Genoil's ZEC miner 6 and when i first started using that version i got major errors and disconnects til i changed pools . my speeds even got better .it's not the software miner now there may be bugs but the major disconnect problems seem to be fixed.
on my new pool im doing 200 sols on fly pool the best i did was 171 .
|
|
|
as long as it is a Script based coin you can, there maybe one or two you can't but there not really pure script coins, that ASIC SCRIPT miner, can mine. you can list them by algorithm and what stage of trading here: . https://www.cryptocompare.com/coins/#/btc?f0=Scryptand there a site you can mine with ASIC SCRIPT miner and be pay in any coin you want even if it can't be mind by ASIC SCRIPT miner, if it's not listed as payout just ask for it , and if it worth it the DEV will make it a payout . I'm using my 146 mh custom made Script miner to mine ZEC coins as a pay out not the coin it self and it's not to bad and GPU mining with a 200 Sols /h farm in my home. https://prohashing.com/
|
|
|
i need to ask and i don't know or wouldn't ask, who mining at 643,775.802 sols and making 148 sec = 208 btc a day if it was BTc i would know are they renting or is there big crops like bitmain using GPU now , just wondering. i really don't care because it's fair game gpu mining they can't stop it unless nvidia and AMD get like bitmain which won't happen .
|
|
|
Genoil zec miner is very very vey bad. Crash Crash Crash !
what pool are you on ? . don't blame the miner so much now it might be your pool so i found out . try this pool . https://www2.coinmine.pl/zec/
|
|
|
Guys, I need a small explanation on what is the purpose of the -k parameter Using -k zec zec on my rigs is getting me less speed than with the default -k zec GPU - Sapphire 480 Nitro OC 4Gb Anyone cares to explain this? --krnl,-k kernelname set kernel(s) -k zec - --krnl/-k parameter can have multiple parameters. This will launch more CPU threads, each running a miner with the specified kernel. For now, only dual (or more) zec is supported, i.e. '-k zec zec' about all i can tell you is what the help me says i honestly don't see a point in using it, it slows all my stuff down and is on by default, i read some place. it's what gave old cards a nice boost when it was added to Genoil's
|
|
|
With the new version my gpu's are going to 0 more often and the restart function doesn't work. The colors and details are great but for now i went back to 5 cuz it was running more stable.
Try using https://www2.coinmine.pl, i was on flypool, my miners were crashing every 3 min, now in coinmine it is really stable Thanks for suggesting this pool , i got tried of to many disconnects on FLy pool i like that pool but binng discounted to much and i couldn't use my CPU's with my GPU there i can on coinmine my r7 370 went from 22 sometimes or lower on fly to 35 steady on coinmine because i can use my cpu at 4 cores and they have version nheqminer 3a which doesn't effect Genoil's 6 at all like nheqminer 2 a does in other word my GPU is not tanked out by using both to gather like it was on fly pool , i do hope they fix fly pool if not it looks like coinmine is my new ZEC mining pool, I'll hit 200 Sol or higher being able to use my CPUs and because of all the crashes and disconnects it was causing I had to reformat my three card rig, error got worse and worse . I just ordered a better cpu cooler for the rig with my r9 280 in it, the cooler it has now sucks a lot if I stress my PC it shuts off it is a very cheap low grade cooler I used to get it running ,I had no intention of using the CPU to mine with .
|
|
|
Thank you for the great work your doing. Sent you a little donation in BTC.
280x = 27ish - 32ish @ 1150/1500mem 290x = 23ish - 29ish @ 1000/1125mem -75coremV modded roms Nano = 14ish - 21ish @ 900/300mem modded rom 7990 = 11ish - 17ish @ 1050/1500 on each core
Everything is WAY cooler than running ETH. Currently V0.5 is more stable then 0.6 except with the Nano's.
Keep up the great work
Tahiti are the KING of mining GPUs as usual. yup
|
|
|
is 280 a rebrand 7970? I have two Powercolor 7970 and they gave approx. 22S/s maybe there might be one setting on i forgot about i used afterburner to turn it on might be why there is a setting called boost in after burner once it on it stys on other then that you think I'm making it up ? . if i turm it off it puts the card at 22 /23 i total forgot i had that on. nop, I have no doubt in what you are saying, I am just trying to make mine hashing harder I also use MSI afterburner, and it seems if I adjust clocks in afterburner, mining speed will turn to 5S, 9S or reduced significantly trying to use the boost button, never realize there is a boost :p not all cards have it there was very few . but i just turn it off and rebooted the PC and it still does 30 with it off and no after burner on , i use AB mostly for fan control all most never for that card boost or off because i water cooled it a while back i guess im just lucky .
|
|
|
is 280 a rebrand 7970? I have two Powercolor 7970 and they gave approx. 22S/s maybe there might be one setting on i forgot about i used afterburner to turn it on might be why there is a setting called boost in after burner once it on it stys on other then that you think I'm making it up ? . if i turm it off it puts the card at 22 /23 i total forgot i had that on. other wise gl this is the turbo card not the normal 280 they came out with , and if the boost setting over clocks under volts or what ever then my bad for lieing about that , i didn't know other wise all my setting are as i said thanks top .
|
|
|
What Sols/s rate are you getting with 290(x)? (Clocks 1030/1250) I'm getting just about 25 Sols/s and 7950 and 280 gives about the same. (Clocks 900/1500) By the way Miner is getting better on every release, thanks my R9 280 at default get 29 to 37 not the X version and seem to the holdiong at 30 with this version of the miner even my r7 370 seem to run better . Okey, thats much better than me :\ I start my miner (7950, 7950 , 280) with these options, have you changed w or i from Default? genoil.exe -c POOL:PORT -u USER.WORKER -p z -g 0 1 2 -f 0
(E8400 and 2gigs of ram if these matter) You can't get 30 with a Radeon 280. Not even with a 280x. that is my R9 280 3gb at stock setting water cooled i use this setting sense everything else appers to be on by default genoil.exe -c us1-zcash.flypool.org:3333 -u ZEC address -p z Nice man. What AMD driver version are you using for your 280x? Did you change intensity, work size or any other options? Stock firmware flashed to card as well? Undervolting? Thanks! Crimson Edition 16.10.3 Hotfix here is the card i have http://www.newegg.com/Product/Product.aspx?Item=N82E16814131570set at defaults including the software miner. I may flash it to see what that does i was very impressed when support for older amd cards came how well this works, it went from using nicehash software hitting at best 10 sol to what you see when 0.42 came out or what ever version gave tahiti cards support .
|
|
|
What Sols/s rate are you getting with 290(x)? (Clocks 1030/1250) I'm getting just about 25 Sols/s and 7950 and 280 gives about the same. (Clocks 900/1500) By the way Miner is getting better on every release, thanks my R9 280 at default get 29 to 37 not the X version and seem to the holdiong at 30 with this version of the miner even my r7 370 seem to run better . Okey, thats much better than me :\ I start my miner (7950, 7950 , 280) with these options, have you changed w or i from Default? genoil.exe -c POOL:PORT -u USER.WORKER -p z -g 0 1 2 -f 0
(E8400 and 2gigs of ram if these matter) You can't get 30 with a Radeon 280. Not even with a 280x. that is my R9 280 3gb at stock setting water cooled i use this setting sense everything else appers to be on by default genoil.exe -c us1-zcash.flypool.org:3333 -u ZEC address -p z
|
|
|
Im using my 7950 shappire rig of 6 gpus getting a media of 16 hashes per gpu. is this good for this type of gpu?? Is there any ways of use 99% of my gpu usage, im stuck at around 85%? Thanks for the help if u could. If the GPU is sat between 80~85% as your graph shows it suggests that they're memory bandwidth/latency limited. Most 7950/7970 will happily do atleast 1500MHz, start there. Failing that you probably want to use a custom BIOS with tighter timings, usually copying a memory strap from 1250/1375 to 1500 does the trick. When I used to have 7950s I was using tighter timings(The Stilt's) and memory clock was around 1700MHz. This provided excellent performance for scrypt and Eth type crypto. Kind of slow mine does 20-25 sol/s with genoils miner 0.4.2 on stock settings Thanks for this. I have a folder setup with this for each of my gpus. 280x x 5. After driver crashes for that paticular gpu genoil won't mine. Not your fault in know but is there a way to auto fix the driver issue so genoil will mine? After driver crashes it only mines 0sols I'm tyring that putting each Gpu in it own folder and useing the -g cammnd to start each one by it self i have one going dead for no reason in my three card rig it either the pool or the miner sense it's not all ways the same GPU that's drops to zero ,
|
|
|
I saw that to and even tried it but had to reformat that PC after I used it but not because of that file, i couldn't find it again . ty . find it and here is original version https://github.com/Genoil/ZECMiner/issues/40 in this post .
|
|
|
|