Ive been running Awesome miner for a few months now with 22 Bitmain L3+, and it certainly has helped my bottom line. But It feels like the software supports 95% gpu, and 5% asic multipool switching. I would like to add as many multipools out there as possible without being restricted to the short list of about 10 in awesome miner. For example if I wanted to monitor profits on prohashing , is that possible on my own, or do I have to wait for Patricke to add it to the list? I may be missing something. Ive looked for some way to add more pools through an api and display profits, and just dont see it.
Vegas
Thanks for your suggestions. I'm open for ideas about which additional multi-coin pools to add support for. The reason for the GPU mining focus for the predefined pools is that most of the GPU mining pools uses the same profitability interfaces (API), making it easy to support many of them. Prohashing is special for several reasons. Their API's has a very unique design and it's not possible to just make some configuration to make it work. Prohasing also uses the password field to specify algorithm information, and the Pool URL is always "prohashing.com:3333" no matter of what is being mined. Because of this special design of prohashing, it's not possible for any software to look at the Pool URL and see which coin or algorithm is being mined - all of them look identical. This is a major drawback in the design of prohashing making it difficult to look at your Antminer and know which prohashing algorithm it actually uses (an ASIC miner never returns the password field). It could probably be supported if Awesome Miner also looked at what kind of Antminer you run and make assumptions that if you have Antminer D3, "prohashing.com:3333" is probably their X11 pool. This will however become complex very fast. If you have any suggestions other than Prohashing.com - please let me know. |
|
|
|
Hi Patrike, can you please add HSR miner for HSR algo as well? It is quite profitable in the longer therm.. Thank you! Awesome miner is far the best tool for mining and monitoring, keep up your great work  Thanks for your nice feedback. HSR could be the one of the next mining software that will be supported - maybe even the next. |
|
|
|
It could be possible that in the autoprofit mode, to click with the right button on a rig or several, to change the pool from the contextual menu
Now you have to enter options, go to a side menu, and choose the pool there, one by one.
As I ask it would be like changing the template in managed, but here one or several rigs is chosen, right button, change pool and there will be the pools that I already have defined. It would be very quick to change.
regards
Thanks for your feedback. By change pool, do you refer to that the pools available for the profit switcher should be changed in an easier way? Because the actual pool being selected by the profit switcher is based on profit only, not a user selection. |
|
|
|
A few minor issues:
- Algorithms: Please add Allium (supported by cpuminer and the next release of ccminer) and YescryptR16 (supported by cpuminer)
- The following algorithms are missing from the ahashpool default list: YescryptR16, Blake256r8 (is this 'blakecoin'?), Groestl, KeccakC, Quark, Qubit, X16r, X16s
- When manually adding Quark and Qubit for ahashpool the profit values are exaggerated:
Thanks!
I will add a few more of these. If you add your custom Online Service entry, Awesome Miner is not aware of if the unit of the profit reporting from the pool (per MH or GH). Because of this, you may have to adjust the Profit Factor in the Properties of the Online Services entries you added. In your case you need to specify a factor of 0.001 |
|
|
|
Patrike, please, increase the time for the "Ignore pools with no accepted shares in (minutes):" to at least 15-20 minutes. https://yadi.sk/i/xBn6Z81k3VsaZw (picture) Or make this option different for different workers. It is really impossible to use it if you run CPU miner: https://yadi.sk/i/9T_ogFpQ3VsaqX (picture) Accepted shares interval can be more than 10 minutes, but Awesome miner thinks there is something wrong after 10 minutes and make ban for the working pool. Thank you I understand your request. To begin with I will add a way to exclude a profit profile from the "Ignore pools" feature, probably from the Pools section in the profit profile. just raise the maximum 10 minutes set in <RequiredAcceptTime> to 99, no other changes needed. Thanks for your feedback. That is unfortunately a bit more complex to change because how Awesome Miner currently collect statistics for Accepted shares. Right now it's only for 10 minutes maximum and will it require a bit of rework in order to support longer period of times in an efficient way. This needs to run fast on 10,000 miners as well. Later on, it will be supported, but not short term. |
|
|
|
patrike1. Here are a few images that are lacking in awesomeminer http://images2.imagebam.com/65/d8/6d/270a23861953514.PNG
http://images2.imagebam.com/06/ca/80/b4a308861925144.PNG
http://images2.imagebam.com/9a/0a/69/d1fb7a861926514.PNG
http://images2.imagebam.com/73/14/95/b05d19861927064.PNG http://images2.imagebam.com/39/e5/90/20961f861953854.png + http://images2.imagebam.com/5c/9a/2f/552982861954434.png
http://images2.imagebam.com/30/36/1c/f2d621861934314.png
http://images2.imagebam.com/d6/c6/d4/6d1eb2861935164.png
http://images2.imagebam.com/c0/ca/0a/7621a7861935434.png 2. Will there be support for "manual sizes"? http://images2.imagebam.com/3c/a4/52/e38d41861939154.PNG 1) Thanks for sharing the details. I will add some of the missing coin logos in the next release. CannabisCoin logo was left out on purpose to not offend anyone. 2) I will take a look at this and see if it can be improved |
|
|
|
Hi patrike
I'm happy to see SRB in the miner's list. Is the best CN miner for now. It's better 'cause customization give more hash, and set it individually for every card.
But I'm having trouble setting it to my cards.
Explaining:
I have a RX570 4GB and a RX580 8GB. I need to set different settings. In CN-Heavy, for example, I need to set intensity 59.5 and 1 thread 570 4GB, and for 580 8GB intensity 54 and 2 threads.
I can't set it in Awesome. When I set gpu_config in config.txt in User/Appdata/Local/AwesomeMiner the miner can't start. If I set -c config-Heavy.txt in command line option into the Profit Profile, the miner can't start.
SRB can't deal with command line intensity, just config.txt. Could you add a field like HiveOS do: "config.txt override", to add a line in config.txt and allow we to set manual intensity and threads?
Thank you in advance.
For a Managed Miners, it's possible to define a custom config.txt content. I will go ahead and add this concept for the Profit profiles so it can be used for the profit switching as well. |
|
|
|
Any chance you can add the Bytom coin?
It show up once it's listed on WhatToMine.com |
|
|
|
Patrike, please, increase the time for the "Ignore pools with no accepted shares in (minutes):" to at least 15-20 minutes. https://yadi.sk/i/xBn6Z81k3VsaZw (picture) Or make this option different for different workers. It is really impossible to use it if you run CPU miner: https://yadi.sk/i/9T_ogFpQ3VsaqX (picture) Accepted shares interval can be more than 10 minutes, but Awesome miner thinks there is something wrong after 10 minutes and make ban for the working pool. Thank you I understand your request. To begin with I will add a way to exclude a profit profile from the "Ignore pools" feature, probably from the Pools section in the profit profile. |
|
|
|
Hello all
What the minimum configuration to run Awesome miner and use the cloud service ?
I plan to use Awesome Miner on a remote site to control ASICs. A Raspberry Pi or Netbook with Intel Atom is enough ?
You need a computer that can run Windows 32-bit or 64-bit desktop applications. R-Pi is for this reason not supported. If you have a smaller number of miners, you can run with Intel Atom. If you are getting close to 100 miners, I would recommend something faster. |
|
|
|
Patrike,
OC support has been working really well after I tweaked a couple of things on my side.
But I think I have found an issue. If during profit mining the miner dies and has to be restarted by AM, it never seems to reset the algo specific OC values. But just under this one condition.
Thanks for the update. I will try to reproduce this scenario. |
|
|
|
Hi Patrike
Any chance you could add the following algos for SRB Miner on your next update (as long as it isnt too much hasle)
artocash
alloy
Both are supported by SRB Miner but cant be used as the config file is over written so cant be changed before starting.
I will add support for it in one of the next few releases. |
|
|
|
- Display the income as coins per day via the Customize Progress Field feature (see web site for usage example) I could not (yet) find this feature described here: http://www.awesomeminer.com/help/customizefield.aspxWhat is the magic word?, (well besides please). I've just published the latest web documentation. Coins per dayDisplay the income in number of coins per day, with 4 decimals. The feature will only work with single coin pools, not on multi-coin pools where the actual coin isn't known. "Coins/day: " + Math.Round(miningHelper.GetCoinsPerDay(), 4) It's only shows coins per day on tiles miner view In the Customize Progress Field dialog, you have two sections. The first section has three lines and is the configuration for the miner view mode "List". The second section only has a single line to be configured, and is used for the miner view modes "Compact List" and "Tiles". |
|
|
|
Hi, how to get balance in AM with cryptoid explorer? I can not configure it  example for Luxcoin: http://chainz.cryptoid.info/lux/api.dws just change the part that says lux in that url to your currency of choice Uffff... Finally Itīs OK with: https://chainz.cryptoid.info/crea/api.dws?q=getbalance&a=And for BTC in Coinbase?? Although Awesome Miner can show the balance of a Bitcoin wallet, it's not supported for Coinbase as they are hiding your indivudual Bitcoin balance from the public block chain. |
|
|
|
Great job Patrike! I've just published the latest web documentation.
Would it be possible to get the code that shows the firmware versions of the S9? I'm looking for an easy way to see which units require updating. Is it possible to mass update antminer firmware using Awesomeminer? Firmware versions and updates are not supported yet, but I've received a number of requests on this so the plan is to support it. |
|
|
|
- Display the income as coins per day via the Customize Progress Field feature (see web site for usage example) I could not (yet) find this feature described here: http://www.awesomeminer.com/help/customizefield.aspxWhat is the magic word?, (well besides please). I've just published the latest web documentation. Coins per dayDisplay the income in number of coins per day, with 4 decimals. The feature will only work with single coin pools, not on multi-coin pools where the actual coin isn't known. "Coins/day: " + Math.Round(miningHelper.GetCoinsPerDay(), 4) |
|
|
|
If you have updated your nvidia drivers lately some of the versions have not been too good for mining, try updating to the latest one, or just a reboot could also work as a quick fix. No, not update. Now new profile INTEL interferes with NVIDIA profile. I have a CPU profile for the Intel I5. Now, I have to stop de CPU miner and then start de Nvidia profiles miners. Once they started mining, I can start the CPU profile. Needed a reboot on the PC for this, if not it did not work  The error message about CUDA is from the mining software itself and doesn't relate to Awesome Miner concepts - unless there is some specific mining software that gets invalid parameters from Awesome Miner. Can you reproduce the issue with the Diagnostics button or share the details about the command line Awesome Miner used to start it when it failed? With this information I can get a better understanding of the issue. Thanks! |
|
|
|
Awesome Miner version 5.0.1 ( Development preview of 5.1 ) - Included predefined profit profile for Intel CPU mining - New source for exchange rates for display currencies (fiat currencies) as the current exchange rate provider will terminate their services June 1st 2018 - Added variable [MinerWorker] for the password field of pools, to include the 'Add to worker name' part of a miner in the password field - Dashboard improved to display up to 8 top coins and algorithms for the active miners. Sorting is by number of active miners. - Added Awesome Miner API for removing Managed Miners and Managed Hosts - The Bulk Edit feature for miners in the Options dialog are accessible directly from the miner list - Display the income as coins per day via the Customize Progress Field feature (see web site for usage example) - Display the current pool name in the miner list when using user defined mining software with API compatibility with known mining software - Default sort order for Online Services tab is on the Profit column - Added a default Block Explorer for ZEN for wallet balance - Benchmark results can be copied to clipboard - The bottom panel of the main window can be made smaller - Changed predefined Bytecoin algorithm to Cryptonight - Improved detection of Managed Hosts duplicates - Improved CcMiner API processing for differents units of reporting for GPU clock, memory clock and power usage - Improved display of small coin values in Coins&Profit section of Options dialog - Correction to Innosilicon A6 hash rate unit - Correction to display of name of custom Online Services where multiple custom services uses the same algorithm - Correction to Wait Action in rules, for scenarios with longer wait times - Correction to benchmark to include the 'Additional command line' configured per algorithm in the profit profile - Correction to network scan to allow including IP addresses ending with 255 To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates Direct download links: http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
|
|
|
|
I leave you a video where you can see that on the same platform I have for example X17 CCminer alexis with -i 21, but in the benchmark it does it in 20, this happens in all of them. It's a bit crazy to have to benchmark and then update with right button to be updated. https://www.dropbox.com/s/qnnpzds94g6mhy8/IMG_2237.MOV?dl=0I would also like to comment on a very simple function that I saw in another hash program, they have a small form for each predefined group to be able to vary in a% its hash rate or price. For example Zergpool takes a long time to update, especially if the price is high, which AM is usually a long time, too much in Zergpool, that fixes me by reducing the price of zergpool by 4%. This makes our pools added by hand have more possibilities if we mix them with some Zpool protocols or similar. Hello. This looks like a bug and I will correct that in the next release. If you enter a command line like you did, it should be used during benchmarking as well. Many thanks for reporting this issue. If you want to reduce the profitability of Zergpool, go to the Options dialog, Online Services. You can then Edit the entries for Zergpool and change profit factor to 0.96 (reducing profitability by 4%). If you want to do this on many pools at one, you can also use the Bulk Edit button. thank you very much for verifying the failure, here many people talk and not always with reason. For example now it is that I have added a custom Miner, but it does not exceed the benchmark because it self-adjusts very high for the 1050, so this small rig can not do the benchmark, I will have to configure a pool by hand of Xevan to be able to launch it and save the hashrate Another thing that I have seen, is when I add a personalized miner, based on ccminer, it does not indicate in the interface that the mining group is mining, now I leave a photo. Look at rig1 and rig2, below they do not indicate in which group or pool they are. It is a modified CCminer and with all the api There was a limitation where the user defined managed software (like your modified ccminer) didn't display the pool names in the list of miners. I actually improved this a few days ago and it's just about to be released. |
|
|
|
I would like to make a suggestion to see if the programmer likes it. I use several miners, all Nvidia, but you dissolve cards.
I would be interested to have an option so that ALL the miners in Auto profit mine the same. For example, I have 4, I define one as a teacher. This chooses a Pool and currency, and all the miners at the same time would mine the same currency, concentrating all my hash in one place.
I do know if it can be done, I know it can be done manually by choosing, but I want it to be only one RIG who chooses (master) and orders the others (slaves), I see that each RIG misses a different thing, sometimes because centimos of difference I do not like, I like that everything mine the same.
There I leave the idea so that it is valued. It would be something optional.
If you use the profit switcher (Managed Profit Miner), all miners with the same Profit Profile should be mining on the same pool. If you use Managed Miners, you might find the Managed Template feature useful: http://www.awesomeminer.com/help/managedtemplate.aspx |
|
|
|
|
Show Posts
