for those who have received theirs in the last couple of days can you tell me if they have the 6-pin pci-e connections on the boards already? or will this be something i will have to wire up? i only have purchased from the original 1st batch and i had to wire my own up, but have helped a friend configure his a couple weeks ago that had the pci-e connection directly wired into the board.
Nothing received yet, but most probably it will have them
|
|
|
Wow, that looks very practical. Thanks for the tip. I'll definitely get some of these. Do you think I can fit 2x Antiminers with 2 PSUs? Any holes on the bottom?
|
|
|
Yes it is a 120 mm PWM fan. I use a Coolermaster Blademaster 120 mm PWM fan, but I have to shave away the clip, otherwise it don't fit. They use special fans where the clips are slight different than aftermarket casefans.
That's what I was looking at the picture: the stock fan uses a 4 pin connector and 4 wires: white, black, blue and red. So can I plug that stock fan into a normal 4 pin fan header?
|
|
|
Guys, I want to buy a 2nd fan to put at the front. Is it a 120mm?
I really like the Arctic F12, but it doesn't come with a 3 pin fan header to 4 pin molex adapter, so can you recommend a cheap fan that does.
Thank you.
|
|
|
My 6 Ants have been shipped today. Just received the tracking info. Expected delivery is Monday Orders made on the 21st. Do you think it is too late to order more for delivery before CNY? I have heard local customs are getting suspicious. So I will suggest to make your homework first Good luck For 20 used declared value the packages are little big, are not they? Декларираната цена е 120 долара. Като се замисля, ми казаха, че ДДС -то е в този порядък. Все пак информацията ми е проверена. Другарите създават проблеми, особено когато бройката е по-голяма и привикват първо за обяснение Когато получателя е юридическо лице внасящи електроника от Китай нещата са доста по-лесни Когато получателя си ти при това в количество, винаги остава чувство за пропусната далавера в митничарската душа. И на там историята е ясна. Говоря за БГ-то Аз съм в UK. Тук очаквам UPS да ми ги донесат в нас и всички митнически такси се оправят директно с тях, даже мисля че може да се предплатят предварително. Ако ли не кешовица директно на куриера. Да се надявам да няма проблеми. Хубавото е, че ще дойдат на 3 пъти по 3 броя.
|
|
|
My 6 Ants have been shipped today. Just received the tracking info. Expected delivery is Monday Orders made on the 21st. Do you think it is too late to order more for delivery before CNY? I have heard local customs are getting suspicious. So I will suggest to make your homework first Good luck For 20 used declared value the packages are little big, are not they? Декларираната цена е 120 долара.
|
|
|
My 6 Ants have been shipped today. Just received the tracking info. Expected delivery is Monday Orders made on the 21st. Do you think it is too late to order more for delivery before CNY?
|
|
|
ok, i was in doubt if those arctics would supply enough CFM. i guess some adapters are needed to put them straight at the PSU? They supply enough imo. Molex adapters are needed or get a cheap fan controller.
|
|
|
Is there a Scrypt Asic miner? Is there a small one line Antminer? What do you know about it?
lol, oh noobs. Remember we were all noobs back in the days Oh those were beautiful days: difficulty of 1 million
|
|
|
Just throwing in my quick PSU experience.... I have an overclocked Antminer running on a Corsair RM 650, and it runs fine =) I think any good quality 650w+ PSU with a single rail is all you need to run one of these.
How many watts at the wall? 120V?
|
|
|
Think again. $40k gets you 5 TH delivered next week. By the time you get the Neptunes, difficulty will be much higher. 5 TH now is far more profitable than 12 TH several months from now. 5th next week? Who sells them? 25+ Antminers from Bitmain. https://www.bitmaintech.com/product.htm3th of Antminers = 5kw (by taking 300watts per Antminer) = 31.654 BTC (without shipping) = 25.8k $ 3th of Neptunes = 2.5kw = 14.6 BTC = 12k $ Two times more $$$ and watts for the same hash-power. when is that neptune shipping? Oh you know, in between 1 and 130 days give or take You know what will piss me off - if they somehow manage to be late and start shipping in Q3. Of course I would have requested a refund long before that.
|
|
|
Thanks. That's pretty obvious, isn't it I am no stranger to modyfing PSUs. All my Jupiters are run without the 24 pin ATX cable, but custom made plugs that I made:
|
|
|
the last batch of neptunes was no refunds?! holy, didnt know that.
KNC used to be very customer friendly, but not anymore. Now you get: No refunds No PayPal/Credit cards accepted No plausible explanations on decisions they make, but just quoting the word "procedures" I remember back in August when Sam Cole was willing to talk with his customers for hours over the phone, but now he is extremely busy. I am also very close at refunding my Neptunes...
|
|
|
@Cyper, you know a lot of PSU's Is a Corsair AX1200i good for november Jupiters? I remember horrible stories with Corsair PSU with the october Jupiters. Thanks
Yes, it is perfect.
|
|
|
Thanks. Do you know what Mhz is 305? Also what is the stock value and stock Mhz?
|
|
|
I hate to muck up this thread but, is it a TOTAL NO NO to use the cx600m to power an OCed antminer s1 with the included pci-e connection? Thanks.
+1 My opinion is is that using one cable with 2 connectors to power an OCed antminer is not recommended, because that is up to 48Amps per 3x12V circuits = 16Amps per circuit, which is a lot for an 18AWG cable I believe. But if you use 2 cables, that should be OK = then only 8Amps per cable. Btw am I correct with my numbers, specifically the max OC current being 48Amps? What is the max overclock of these in terms of chip Mhz and GH/s? CX600M might not be enough then? snip theheads off the 4-pin ATX mobo cables. I ran an overclocked antminer using 2 pairs of 12V line from the ATX for each blade (wires did get a bit warm but not dangerously). Using just a sinlge PCI-e for both blades will be a problem and danger though So you are using all the 4 yellow cables from this connector: 2 per blade, correct? I will probably use the already present PCI-E cable that has 3x 12V circuits for 1 blade and the 8 pin CPU connector, which has 4x 12V circuits for the other blade.
|
|
|
Thanks. I see that the hex values are different for the November units: 0x02,0xB5 Do you have the rest with their corresponding clocks?
Thank you.
|
|
|
|