Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?
No, you need to use newer cgminer & apply the latest patch. Latest patch is for cgminer 4.6.1. Thanks, for the (super-) quick reply! And do I need a PSU with 4 separate cables? Or would 2 cables with the integrated splitter (so 4 PCI 6pin connectors, 2 per cable) work too? You must use 4 separate cables. 2 cables will be very hot. |
|
|
|
Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?
No, you need to use newer cgminer & apply the latest patch. Latest patch is for cgminer 4.6.1. |
|
|
|
Some chips specs & picture would be great.
|
|
|
|
How much you want to spend?
maximum $300 Technobit DICE ===> DICE with controller The unit come without psu. |
|
|
|
|
How much you want to spend?
|
|
|
|
|
If you are going to use ATX PSU, then buy PSU with rated power 750watt.
If you are in US, find used server PSU, they are cheap & reliable.
|
|
|
|
look at the screen shot above
Hi! I got 39 HW running for 2 hours now. is it still ok? Yes, that's fine  |
|
|
|
|
Some chips specs & picture would be great.
|
|
|
|
A new firmware how did I miss that No, you didn't That is screenshot from marto, new firmware still not release yet. |
|
|
|
We still waiting for latest firmware release from marto. Screen shot on DICE thread is using cgminer 4.8.0 There is a change that firmware 0.4.0 had no support for DICE.  |
|
|
|
Hi! Im using Antminer S3+ B11 and the PSU is Corsair RM750  Please do reply Thanks advance and God Bless!!!!! I see that the Corsair RM750 already arrived |
|
|
|
Probably dead chip I am not sure if this can work but you can check it by running command under cgminer folder: You need to compile cgminer-api first: gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api
|
|
|
|
Alright, I don't really have control over the first router; so to change the IP on the miner should I be changing everything in that WAN tab to 10.0.0.* ? Meaning, IPv4 address becomes 10.0.0.99, IPv4 netmask stays the same (255.255.255.0), IPv4 gateway would be 10.0.0.1, IPv4 broadcast would be 10.0.0.255, and DNS would be 10.0.0.1?
BTW, I got into the CP.
Yes For dns you might want to add 8.8.8.8 as second dns. |
|
|
|
The routers IP's are 10.0.0.1 and 192.168.1.105, my computer only shows as 10.0.0.3.  I see. Your second router IP is 10.0.0.1. Then your pc ip must be 10.0.0.xx. You need to change your pc ip address to static & make it like 192.168.1.50. Then connect the miner directly to your pc & change the miner ip address to 10.0.0.99. or change your first router ip to 192.168.0.1 & change your second router ip to 192.168.1.1. With this you don't need to change your miner ip address. |
|
|
|
I can't connect to this thing, tried both the regular way and the alternate way. Nothing. 192.168.1.99 gives me an unable to connect page in Firefox.
What is your pc ip address? It must be same prefix with the miner. Example 192.168.1.50 My LAN IP is 10.0.0.1. (Can't change it to anything else). My Internet IP is 192.168.1.105. Info coming off of my Netgear router control page. I am on a sub-network. We have two routers. One that our main modem is plugged into, my router is plugged into that router. So your pc ip is 192.168.1.105 ? The miner connected to same router with your pc right? |
|
|
|
I can't connect to this thing, tried both the regular way and the alternate way. Nothing. 192.168.1.99 gives me an unable to connect page in Firefox.
What is your pc ip address? It must be same prefix with the miner. Example 192.168.1.50 |
|
|
|
.....
Second, I got an S3+, regarding powering it, should I be using two cables on my PSU for it, or would one cable (with two connectors) work?
Yes, you should use two cable from psu, one cable is not enough. |
|
|
|
Interesting review from technical point of view. Thanks |
|
|
|
yes but i was not a legendary so i havent asked
but
some of hero members got it.
i wonder what decides about this.
philipma should get free unit for his reviews too.
Yes, i am also didn't ask since the OP clearly stated for Legendary Now i realize something after read Blazedout419 post. Even if i ask there is no guarantee i will receive it since i am not "special" member  |
|
|
|
|
Show Posts
