AOCLBF (was Phoenix Rising): Phoenix/POCLBM GUI With Built-In Overclock Tool

[hiVe]

@ PEAO
Yes, it will work.

@hiVe

1. check if u entered correct login and password
2. make sure u put rising phoenix in phoenix miner folder
3. make sure u entered correct platform in extra flag field (if u are using multiple platform ofc)
If none of this happened please upload here screen with your settings so maybe I'll find that mistake (also specify your rig (OS,SDK,GPU)

Yea, all is correct, but f*ck it doesn't work, thanks for the attempt to help me though.

[1715369981]

1715369981

[1715369981]

1715369981

[1715369981]

1715369981

[1715369981]

1715369981

[lvlrdka22]

I switched to 1.31 and my hashrate for my 5870 went from 445 Mhash/s to 395 Mhash/s and my 5850 went from 342 Mhash/s to 320 Mhash/s with no settings changed. If I launch 1.3 it still runs at the original speed.

I removed vectors from the must-load argument list, so you'll have to add that in Extra Flags.

Hm.
1.32: I have added an extra option under Affinity to pick a random core to use (that still makes every instance run on the same core, except it's randomized, as in, once every client stops, it repicks a core to run on).
Thinking about an AMD/ATI GPU monitor (can't figure out how to use ADL dll, so using a different one) that stops client once temperature reaches a certain point, and starts client again once it drops below a certain point.
Right now, I have it as an external script controlling Phoenix Rising, seems to work well.
In progress.

[lvlrdka22]

^
|

[lvlrdka22]

I need some feedback on how well my temperature monitor is working (AMD/ATI GPUs only).
http://www.mediafire.com/?oyd7tj6ezvebaiz
Does it list both the slot the GPUs are plugged in and the temperature correctly?
Also, is Device 0 the one in first slot, Device 1 the GPU in the next-filled slot, etc.?
What I mean is, for example, I'm using slot 0 and 3, and Device 0 is the one in slot 0, Device 1 is the one in slot 3. Is the Device Number always incremented like that?

[namley]

You just made my day!

[Kluge]

Maybe not worth your time, but it would be nice to have an "export" feature where it writes up a .txt file giving the full line going to the cmd window when running Phoenix for debugging purposes.

I'm having trouble getting Phoenix to run using PR on a particular computer I'm running and can't figure out why. Since all I get is a blank command window and "xx seconds idle | xx seconds until restart" I'm having difficulty debugging it myself because I don't know exactly what Phoenix is being fed.

Edit: Found my problem -- I didn't capitalize a particular letter in password field :x

Edit2: And I'm using the 32-bit client :p

[lvlrdka22]

I can do that. Try this: http://www.mediafire.com/?d2wtoj47ufcgzwv

Oh, still need people to test out that separate script I wrote. Need to see if Device Number directly corresponds to which GPUs are in the top slots, as in, if Device 0 is the one in first slot, Device 1 the GPU in the next-filled slot, etc.

[MaSell]

Any chance to hide OSD?

[Chef]

Just a quick bug report:

The backup pool feature seems to work nicely on 1.3 and 1.31. The get back to primary-pool feature however does not. I waited for over an hour now (it's set to 2 minutes), but i had to restart the worker to get it back to the original pool.

Anyways, thanks for the tool, it helps my uptime quite a lot!

[dishwara]

EXCELLENT

Nice GUI, only thing needed is tabbed interface.
I directly tried with 1.32, just for the past 30 minutes, giving correct values & its running with out me for past 5 minutes.
I see shadow behind OSD, causing letters to look double, instead of sharp, even after trying clear type in windows, that i can say bug now.

[lvlrdka22]

I need some feedback on how well my temperature monitor is working (AMD/ATI GPUs only).
http://www.mediafire.com/?oyd7tj6ezvebaiz
Does it list both the slot the GPUs are plugged in and the temperature correctly?
Also, is Device 0 the one in first slot, Device 1 the GPU in the next-filled slot, etc.?
What I mean is, for example, I'm using slot 0 and 3, and Device 0 is the one in slot 0, Device 1 is the one in slot 3. Is the Device Number always incremented like that?

Tested in 3 rigs:

1x 6990 - ok - 2 devices detected - Device 0 and 1 worked properly;
1x 5970 - just onde device detected - Device 0
2x 5970 - just 2 devices detected - Device 0 and 3

Hm, mind trying this with the 5970s?
http://www.mediafire.com/?6fwbxckivpohml2

Just a quick bug report:

The backup pool feature seems to work nicely on 1.3 and 1.31. The get back to primary-pool feature however does not. I waited for over an hour now (it's set to 2 minutes), but i had to restart the worker to get it back to the original pool.

Anyways, thanks for the tool, it helps my uptime quite a lot!

It tries to tell using ping. If main server isn't pingable and is idling, it switches to backup until the primary becomes pingable again.

[FRanz33]

Im noticing a bug where the miner doesnt always restart. it Just hangs with a blank command line window open and its stay hung until i close the window the the miner restarts. any body else seen this? i tested on 10 machines and 8 had the bug with in 8 hrs

[dikidera]

So what are the good and bad parts about this program?

+GUI

-An OSD that stays in the top right corner of my screen without the ability to move it.
-The OSD stays on top of EVERY program.
-The OSD has barely visible words(impossible to read the text at all)
-Small fields when entering arguments
-Checkbox for phatk, but not for vectors and BFI_INT

Basically, although i appreciate the try, you should've tried harder.

[lvlrdka22]

So what are the good and bad parts about this program?

+GUI

-An OSD that stays in the top right corner of my screen without the ability to move it.
-The OSD stays on top of EVERY program.
-The OSD has barely visible words(impossible to read the text at all)
-Small fields when entering arguments
-Checkbox for phatk, but not for vectors and BFI_INT

Basically, although i appreciate the try, you should've tried harder.

Yes, it can be moved. You aren't doing it correctly.
That's exactly what OSD means.
You can change colors of the text.
What?
Vectors, put in to Extra Fields, it's in the instructions. BFI_INT=5xxx+.

Basically, if you can't be bothered with figuring out how to use, don't use it.

[dikidera]

Then make the fields bigger lol. I am not some ant to try and read that. Also, why write 5Xxx+?? Just write BFI_INT so there are no misunderstandings then.
And also, if it stays on top of every program(the osd) then how the hell can i watch a movie without that thing??

[lvlrdka22]

Then make the fields bigger lol. I am not some ant to try and read that. Also, why write 5Xxx+?? Just write BFI_INT so there are no misunderstandings then.
And also, if it stays on top of every program(the osd) then how the hell can i watch a movie without that thing??

Is that your complaint about GUIMiner as well? They're the same size.
5xxx+ because not everyone understand what BFI_INT means. And I did say that they're the same thing on the first post. Do you just hit "Download" and double click when finished?
Drag it off screen then.

[dishwara]

The OSD position can't be saved. Restart of phoenix rising causes OSD go back to top left corner & also OSD gets messed by displaying each card details in same place. I have 3 cards mining & all 3 at same place.

I also found a problem in version 1.32.
It just says restarting after phoenix crash in a cmd window but can't able to restart.
only way to restart, is to close that window manually & it automatically restarts miner then.
This problem is not with 1.31. In 1.31, it displays restarting & restarts in less than 10-20 seconds.

OSD overlapping & not saving last position is in both 1.31 & 1.32

[FRanz33]

Its been a bug since the very first version. only hiccup about the miner other than that it would be flawlessly functional...the asthetics (osd text size)..who cares just need it to mine without me hovering over it

[Peao]

Im noticing a bug where the miner doesnt always restart. it Just hangs with a blank command line window open and its stay hung until i close the window the the miner restarts. any body else seen this? i tested on 10 machines and 8 had the bug with in 8 hrs

Same here. But not in 80% of the miners, like FRanz33.

[dishwara]

Im noticing a bug where the miner doesnt always restart. it Just hangs with a blank command line window open and its stay hung until i close the window the the miner restarts. any body else seen this? i tested on 10 machines and 8 had the bug with in 8 hrs

I too have same problem in 1.32