Bitcoin Forum
August 07, 2024, 07:28:21 PM *
News: Latest Bitcoin Core release: 27.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 [285] 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 ... 416 »
  Print  
Author Topic: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH  (Read 527702 times)
philipma1957
Legendary
*
Online Online

Activity: 4214
Merit: 8281


'The right to privacy matters'


View Profile WWW
December 23, 2015, 12:42:30 AM
 #5681

I've always updated my antminers with Firefox. No need for Chrome. I guarantee he's getting an error because he's trying to extract the file instead of just flashing it as downloaded.

I don't suggest updating the miners, though. Just set a manual fan speed with whatever firmware you miner shipped with.
What manual speed do you use?
What is a safe rpm to use?


depends on room temp and clocks

3480 at 45%  
3720 at 50%
3840 at 55%
3980 at 60%
4120 at 65%  all of the above   could be okay

I do 3980 at 60%

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
hodedowe
Sr. Member
****
Offline Offline

Activity: 359
Merit: 251


View Profile
December 23, 2015, 12:55:44 AM
 #5682

I've always updated my antminers with Firefox. No need for Chrome. I guarantee he's getting an error because he's trying to extract the file instead of just flashing it as downloaded.

I don't suggest updating the miners, though. Just set a manual fan speed with whatever firmware you miner shipped with.
What manual speed do you use?
What is a safe rpm to use?


depends on room temp and clocks

3480 at 45%  
3720 at 50%
3840 at 55%
3980 at 60%
4120 at 65%  all of the above   could be okay

I do 3980 at 60%

Philip's right as usual. Just look at your temps. You want to shoot for 60-70c after 10 minutes. If it's under that, set the fan speed to less and try again.

Solo mining is alive and profitable!
Helped? Thanks! 1CXRFh4bDVFBsUzoHMMDbTMPcBP14RUTus
philipma1957
Legendary
*
Online Online

Activity: 4214
Merit: 8281


'The right to privacy matters'


View Profile WWW
December 23, 2015, 01:26:44 AM
 #5683

Did four orders for s-7's today.

It would have been nice to get a coupon or compensation for my poorly made   batch 1.

So far  I have no compensation for my batch one or batch two machines.

But they have the best gear.


https://blockchain.info/tx/b21ccd8aec24e52504b4c3812cde79e396187dd61a8f9b8cb80cfa9562d736f2 ---- 3.104 btc
https://blockchain.info/tx/b34139f20dfc5c28eb9620b2d1d69ab0f0b4bc6e006cc10daf1b99d30a89aeed ----- 3.104 btc
https://blockchain.info/tx/a78af0deab78853160cdd9f41e2881552a9d6e84286e36e16ccf300bbb929869 ---- 3.104 btc
https://blockchain.info/tx/375b4a6376f27a22b7868e14fbbb0571d856d66799d112768b51032fe4528de3 ---- 3.104 btc


total 12.416 btc.


I figure they owe me just about .4 or. 5 btc from batches one and two.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
Prelude
Legendary
*
Offline Offline

Activity: 1596
Merit: 1000



View Profile
December 23, 2015, 01:31:59 AM
 #5684

Did four orders for s-7's today.

It would have been nice to get a coupon or compensation for my poorly made   batch 1.

So far  I have no compensation for my batch one or batch two machines.

But they have the best gear.


https://blockchain.info/tx/b21ccd8aec24e52504b4c3812cde79e396187dd61a8f9b8cb80cfa9562d736f2 ---- 3.104 btc
https://blockchain.info/tx/b34139f20dfc5c28eb9620b2d1d69ab0f0b4bc6e006cc10daf1b99d30a89aeed ----- 3.104 btc
https://blockchain.info/tx/a78af0deab78853160cdd9f41e2881552a9d6e84286e36e16ccf300bbb929869 ---- 3.104 btc
https://blockchain.info/tx/375b4a6376f27a22b7868e14fbbb0571d856d66799d112768b51032fe4528de3 ---- 3.104 btc


total 12.416 btc.


I figure they owe me just about .4 or. 5 btc from batches one and two.

And they figure they owe you and everyone else shit all. What a fucking horrible shitty company they are. If any normal business acted like bitmain does, they'd be bankrupt with the quickness. Luckily for bitmain, they have a (hopefully temporary) monopoly for the home miner's market, and they make money printing machines so they don't actually need customers. We're just there to reduce the risk they take in developing hardware. All they're good at is making decent hardware and shipping. Everything else is a complete shit show.
E
Full Member
***
Offline Offline

Activity: 234
Merit: 100


View Profile
December 23, 2015, 02:19:37 AM
 #5685

Batch 8 / DPS-2000BB efficiency measurements teaser shot:



Waiting on a 500A shunt to finish the DC draw measurements but I hope to get the WallJ/TH numbers up soon.

I will say this particular Batch 8 hits 5TH/s with no drama. And... it keeps the DPS-2000BB cool w/ exhaust at the same time  Cheesy
Prelude
Legendary
*
Offline Offline

Activity: 1596
Merit: 1000



View Profile
December 23, 2015, 02:38:43 AM
 #5686

Batch 8 / DPS-2000BB efficiency measurements teaser shot:



Waiting on a 500A shunt to finish the DC draw measurements but I hope to get the WallJ/TH numbers up soon.

I will say this particular Batch 8 hits 5TH/s with no drama. And... it keeps the DPS-2000BB cool w/ exhaust at the same time  Cheesy

Nice! Looking forward to your results. How are you getting 5TH? Mine won't overclock for shit, in fact they can't even reach advertised speed. Have you found a way to increase voltage delivered to the chips on B8?
E
Full Member
***
Offline Offline

Activity: 234
Merit: 100


View Profile
December 23, 2015, 02:50:45 AM
 #5687

Batch 8 / DPS-2000BB efficiency measurements teaser shot:



Waiting on a 500A shunt to finish the DC draw measurements but I hope to get the WallJ/TH numbers up soon.

I will say this particular Batch 8 hits 5TH/s with no drama. And... it keeps the DPS-2000BB cool w/ exhaust at the same time  Cheesy

Nice! Looking forward to your results. How are you getting 5TH? Mine won't overclock for shit, in fact they can't even reach advertised speed. Have you found a way to increase voltage delivered to the chips on B8?

So far all I've done is increase the clockspeed through the web interface! I haven't looked at chip/chain level voltage at all, even to measure it. Luck?
nhando
Full Member
***
Offline Offline

Activity: 196
Merit: 100


View Profile
December 23, 2015, 02:56:37 AM
 #5688

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

Just "Mining" my own business.
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
December 23, 2015, 03:11:18 AM
 #5689

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

If you look at 700 it's already pushing freq compared to where older S7's were on lower freq as shown below:

Prelude
Legendary
*
Offline Offline

Activity: 1596
Merit: 1000



View Profile
December 23, 2015, 03:19:44 AM
 #5690

Batch 8 / DPS-2000BB efficiency measurements teaser shot:



Waiting on a 500A shunt to finish the DC draw measurements but I hope to get the WallJ/TH numbers up soon.

I will say this particular Batch 8 hits 5TH/s with no drama. And... it keeps the DPS-2000BB cool w/ exhaust at the same time  Cheesy

Nice! Looking forward to your results. How are you getting 5TH? Mine won't overclock for shit, in fact they can't even reach advertised speed. Have you found a way to increase voltage delivered to the chips on B8?

So far all I've done is increase the clockspeed through the web interface! I haven't looked at chip/chain level voltage at all, even to measure it. Luck?

Very lucky. Smiley

Mind posting a screenshot of it after running for a few hours at ~5TH/s?
nhando
Full Member
***
Offline Offline

Activity: 196
Merit: 100


View Profile
December 23, 2015, 03:52:58 AM
 #5691

I don't think the S7 will keep anything cool with it's exhaust.  =)  The 2 box in my garage is raising the ambient TEMP of my garage by 14 degrees.  I do have 2 Ultra KAZE fans on the 2 x 2KW IBM PSU that do push a lot of air and the PSU runs very cool and those fans is powerful enough to push thru the PSU and keep 1 side of the S7 quite cool.   As Prelude said, would like to see the numbers after it's been running a couple of hrs as I'm definitely interested in seeing it as I have the exact same setup.

Just "Mining" my own business.
philipma1957
Legendary
*
Online Online

Activity: 4214
Merit: 8281


'The right to privacy matters'


View Profile WWW
December 23, 2015, 04:04:24 AM
 #5692

Did four orders for s-7's today.

It would have been nice to get a coupon or compensation for my poorly made   batch 1.

So far  I have no compensation for my batch one or batch two machines.

But they have the best gear.


https://blockchain.info/tx/b21ccd8aec24e52504b4c3812cde79e396187dd61a8f9b8cb80cfa9562d736f2 ---- 3.104 btc
https://blockchain.info/tx/b34139f20dfc5c28eb9620b2d1d69ab0f0b4bc6e006cc10daf1b99d30a89aeed ----- 3.104 btc
https://blockchain.info/tx/a78af0deab78853160cdd9f41e2881552a9d6e84286e36e16ccf300bbb929869 ---- 3.104 btc
https://blockchain.info/tx/375b4a6376f27a22b7868e14fbbb0571d856d66799d112768b51032fe4528de3 ---- 3.104 btc


total 12.416 btc.


I figure they owe me just about .4 or. 5 btc from batches one and two.

And they figure they owe you and everyone else shit all. What a fucking horrible shitty company they are. If any normal business acted like bitmain does, they'd be bankrupt with the quickness. Luckily for bitmain, they have a (hopefully temporary) monopoly for the home miner's market, and they make money printing machines so they don't actually need customers. We're just there to reduce the risk they take in developing hardware. All they're good at is making decent hardware and shipping. Everything else is a complete shit show.

Well they have
1) the best gear for sale -   watts per gh
2) they ship pretty fast
3) they sell at a better price then anyone else
4)the gear works pretty well

All of the above is true.

5) if there is any kind of a problem they are pretty much fuck you.

Now I am not the biggest buyer they have had but I purchased 15k in s-7's and 2 k in s-5's
and 5k is s-3's
and 5k in s-1's
and 5k in u1's
and 2k in u2's

I wrote fix it threads and reviews for much of the gear.  And I have fixed a shit ton of their miner issues on support posts pm's etc.

when you have 2 pieces of mining gear in the entire world to choose from

S-7
Avalon 6 

it is hard to get service or gear.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
E
Full Member
***
Offline Offline

Activity: 234
Merit: 100


View Profile
December 23, 2015, 04:07:47 AM
 #5693

I don't think the S7 will keep anything cool with it's exhaust.  =)  The 2 box in my garage is raising the ambient TEMP of my garage by 14 degrees.  I do have 2 Ultra KAZE fans on the 2 x 2KW IBM PSU that do push a lot of air and the PSU runs very cool and those fans is powerful enough to push thru the PSU and keep 1 side of the S7 quite cool.   As Prelude said, would like to see the numbers after it's been running a couple of hrs as I'm definitely interested in seeing it as I have the exact same setup.

Cool is relative, of course - but the 45C exhaust air is fine for the PSU at the cfm the S7 so screamingly provides, especially at 60% (1200W) load. I typically run the bladecenter e psus in 2 packs like you describe, usually with 2x120mm 240v fans of whatever sort I can get cheaply locally... 
nhando
Full Member
***
Offline Offline

Activity: 196
Merit: 100


View Profile
December 23, 2015, 04:14:04 AM
 #5694

I find the Avalon Reps selling Avalons very responsive and always willing to help both at Oregonminer and Zoomhash but that's a different topic.  Just a bit frustrating when you're trying to order more batch 8 S7s, their site was down for a few days, then it comes back online, after each Batch 7 box was $150 more expensive due to BTC increase.  Now the challenge with Batch 9 is if you're wanting to pay via Wire, you're paying $100 more per S7 vs BTC because they can't update their website properly even though support said it's fixed.  But as you say, due to the Monopoly, there's less concern about Customer service. I hope there will be more competition in the market so that all the vendors step up.  The only positive thing I have to give to Bitmain is that their shipping is super fast!

Just "Mining" my own business.
philipma1957
Legendary
*
Online Online

Activity: 4214
Merit: 8281


'The right to privacy matters'


View Profile WWW
December 23, 2015, 04:27:41 AM
 #5695

I find the Avalon Reps selling Avalons very responsive and always willing to help both at Oregonminer and Zoomhash but that's a different topic.  Just a bit frustrating when you're trying to order more batch 8 S7s, their site was down for a few days, then it comes back online, after each Batch 7 box was $150 more expensive due to BTC increase.  Now the challenge with Batch 9 is if you're wanting to pay via Wire, you're paying $100 more per S7 vs BTC because they can't update their website properly even though support said it's fixed.  But as you say, due to the Monopoly, there's less concern about Customer service. I hope there will be more competition in the market so that all the vendors step up.  The only positive thing I have to give to Bitmain is that their shipping is super fast!

 I should have said service & gear Grin


▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
RichBC
Hero Member
*****
Offline Offline

Activity: 588
Merit: 500



View Profile
December 23, 2015, 06:28:44 AM
 #5696

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

There is no point in changing the voltage on a Batch 6, 8 or 9. They have a Buck Converter built onto the Hash board that controls the voltage sent to the chips. Good news is that at some point I am sure a mod will be available that will enable the Core Voltage to be adjusted.


Rich

→→→→→→→→→→→→→→→→→→ 💰 Hard-Disk Mineable Cryptocurrency !! B U R S T C O I N 💰 Cheap Price & Easy to Invest - CHECK IT OUT NOW! !! →→→→→→→→→→→→→→→→→→ 💰 Asset exchange, Automatic transactions, Escrow system & More !!
J4bberwock
Hero Member
*****
Offline Offline

Activity: 840
Merit: 1000


View Profile
December 23, 2015, 09:06:38 AM
 #5697

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

There is no point in changing the voltage on a Batch 6, 8 or 9. They have a Buck Converter built onto the Hash board that controls the voltage sent to the chips. Good news is that at some point I am sure a mod will be available that will enable the Core Voltage to be adjusted.


Rich
I won't have access to the S7 for the next 8-9 days, but I'll definitely change the 6k8 resistor as soon as I'm back.
800MHz, 5,3Th is still too low. I'm sure we can do 900.
And I'll probably try to get an earlier batch with 162 chips later to see how it can be overclocked.

Custom Server PSU breakout boards, 1200w, 1300w, 2000w, 2880w https://bitcointalk.org/index.php?topic=738527.0
Btc: 1J4bberWs6f6XVQ53gn3BNc8qHAicmm7wu
Ltc: LNDmMBtzD3cduwjfxANm2wDrxt9jXRk5ZP
philipma1957
Legendary
*
Online Online

Activity: 4214
Merit: 8281


'The right to privacy matters'


View Profile WWW
December 23, 2015, 01:48:33 PM
 #5698

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

There is no point in changing the voltage on a Batch 6, 8 or 9. They have a Buck Converter built onto the Hash board that controls the voltage sent to the chips. Good news is that at some point I am sure a mod will be available that will enable the Core Voltage to be adjusted.


Rich
I won't have access to the S7 for the next 8-9 days, but I'll definitely change the 6k8 resistor as soon as I'm back.
800MHz, 5,3Th is still too low. I'm sure we can do 900.
And I'll probably try to get an earlier batch with 162 chips later to see how it can be overclocked.

The batch 2 I have goes to 631 freq and it is rated 575 freq

I am using your 2880 watter with  12.2 volts  lots of overhead as I am running 1 miner on it.

but even if I do 12.5 volts  I top out at freq 631.

So batch 2 has some type of restriction

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
VirosaGITS
Legendary
*
Offline Offline

Activity: 1302
Merit: 1068



View Profile
December 23, 2015, 01:50:21 PM
 #5699

Yes definitely Luck.  My Batch 8 using the same 220V IBM 2KW won't change in hash rate by moving to 775 or 800M.  Have to increase the voltage to see some gain like what Phillip did.

There is no point in changing the voltage on a Batch 6, 8 or 9. They have a Buck Converter built onto the Hash board that controls the voltage sent to the chips. Good news is that at some point I am sure a mod will be available that will enable the Core Voltage to be adjusted.


Rich
I won't have access to the S7 for the next 8-9 days, but I'll definitely change the 6k8 resistor as soon as I'm back.
800MHz, 5,3Th is still too low. I'm sure we can do 900.
And I'll probably try to get an earlier batch with 162 chips later to see how it can be overclocked.

The batch 2 I have goes to 631 freq and it is rated 575 freq

I am using your 2880 watter with  12.2 volts  lots of overhead as I am running 1 miner on it.

The earlier batches probably have more, undervolted chips. While the later batches have less, overvolted chips. So i'm guessing the earlier batches with the most chips would be able to get the most out of overvolting.

Assuming nothing else fry when you try it.


                      ▄▄█████▄▄
                    ▐████████████▄
                   ▄█▀▀▀▀▀▀▀██████▌
             █▄  ▄█▀           ▀▀█
              ▀▀▀███▄▄▄▄▄▄▄▄▄▄   █▄   ▄

               ▄▀▀         ▀▀▀▀▀▀▀██▀▀▀
         ▄▄▄▄▄█▄▄ ▄▀▀▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄█▄▄▄▄
         ████▒▒███    ████▒▒████▌
    ▀█▄ ▀
███████▄ ███▒▒███      ██▒▒█████       ▀█▄
 ███████ ▀█▒▒████     ▄█▒▒█████▀         ▀█ ▄  ▄▄
  ██████  ▌▀▀█████▄▄▄███████▀▀            ███▄███▌
 █████████  █████▀▀█▀▀██████▌             ██████▀
 ▀█████████ ███▄  ███   ▐███▌ ▄██       ▄█████▀
     ▀▀    ▀▀███████████████▄▄████▄▄▄▄█▀▀▀▀▀
               ▀▀▀███▀▀▀      ██████▄
                               ▀▀▀▀▀

▄█████████████████████████████▄
███████████████████████████████
███████████████████████████████
███████████████████████████████
█████████▀▀█████████▀▀█████████
███████ ▄▀▀         ▀▀▄ ███████
██████                   ██████
█████▌     ▄▄     ▄▄     ▐█████
█████     ████   ████     █████
█████      ▀▀     ▀▀      █████
█████▄   ▀▄▄▄     ▄▄▄▀   ▄█████
████████▄▄▄█████████▄▄▄████████
███████████████████████████████
███████████████████████████████
███████████████████████████████
 ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
█ █
█ █
█ █
█ █
█ █
RichBC
Hero Member
*****
Offline Offline

Activity: 588
Merit: 500



View Profile
December 23, 2015, 02:12:23 PM
 #5700

The earlier batches probably have more, undervolted chips. While the later batches have less, overvolted chips. So i'm guessing the earlier batches with the most chips would be able to get the most out of overvolting.

Assuming nothing else fry when you try it.


There is probably not much in it, except of course for the greater number of chips favouring the 162 chip systems.
The 162 chip miner with 12v across the 18 Chip string gives a core voltage of 0.667V
The 162 chip miner with 12.2v across the 18 Chip string gives a core voltage of 0.678V
The 135 chip miner with 10.12v (measured by J4bberwock) across the 15 Chip string gives a core voltage of 0.675V

A bigger factor may be if they have been selecting BM1385 chips, which of course we will never know?

Rich

→→→→→→→→→→→→→→→→→→ 💰 Hard-Disk Mineable Cryptocurrency !! B U R S T C O I N 💰 Cheap Price & Easy to Invest - CHECK IT OUT NOW! !! →→→→→→→→→→→→→→→→→→ 💰 Asset exchange, Automatic transactions, Escrow system & More !!
Pages: « 1 ... 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 [285] 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 ... 416 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!