[ANN][DCR] Decred - Community Governance | Bitcoin Devs | Lightning Network

[marcus1986]

Thank you for cheap coins, guys! 

[jeremy grol]

Remember Crave : from 90k to 30k, and then, to 800k.

and then 2k satoshi

lol. Yeah, I remember you were invested in Crave.
Decred is more than masternodes, and the community is great. There are many millionnaires here, as ocminer.

i am gonna invest Decred when airdrop coins are sold. The price is still too high for me. I ll wait to 200k maybe 150k.

Are you going to buy bitcoins only when satoshi will dump all of his addresses?

[ocminer]

I sent in my gaia and addy the first day. Where is my email asking for my KR addy? Meanwhile people are trading on Yobit and I don't have my coins. That's insider b.s., send out our emails so we can get our coins that we sent you GAIA, where is our KR?

you're in the wrong thread.

lol... no blonde devs in here i think.

a pity

[adhitthana]

Remember Crave : from 90k to 30k, and then, to 800k.

and then 2k satoshi

lol. Yeah, I remember you were invested in Crave.
Decred is more than masternodes, and the community is great. There are many millionnaires here, as ocminer.

i am gonna invest Decred when airdrop coins are sold. The price is still too high for me. I ll wait to 200k maybe 150k.

How many more airdrop coins are there?

[tbearhere]

Why people dump DCR on Bittrex? Any bad news?  

is there any good news? The current price is very exaggerated. it s just bubble.

Yes an inverse bubble ....it should be 4x the price....imo

[twistelaar]

Looking for an entry for DCR, what would be a good entry point? thanks!

[scam confirmed]

Why people dump DCR on Bittrex? Any bad news?  

is there any good news? The current price is very exaggerated. it s just bubble.

Yes an inverse bubble ....it should be 4x the price....imo

Why?

[kahir]

Looking for an entry for DCR, what would be a good entry point? thanks!

dcr is kinda in price discovery atm ... but me personally would buy around 300

[Abou Talha]

Looking for an entry for DCR, what would be a good entry point? thanks!

Everything under 1 million sats is good.

[doriangray]

Looking for an entry for DCR, what would be a good entry point? thanks!

Everything under 1 million sats is good.

Absolutely, this is a great opportunity for those who wants to get in at a very early stage of development.

[arielbit]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

[ocminer]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

Haha, this is probably gonna fuck up your day, but check the pool.

I already received a mail the pool is only displaying half the hashrate of the miner...

It's NOT the pool

[arielbit]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

Haha, this is probably gonna fuck up your day, but check the pool.

I already received a mail the pool is only displaying half the hashrate of the miner...

It's NOT the pool

pool is not accurate..

refreshing page from time to time, my combined r9 390 and 5870 fluctuates from 1.7 GHs to 3GHs but sticks to more or less 2.5 GHs.

[Patrice7]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

http://s22.postimg.org/ar5pvyyep/5870.jpg

Haha, this is probably gonna fuck up your day, but check the pool.

I already received a mail the pool is only displaying half the hashrate of the miner...

It's NOT the pool

pool is not accurate..

refreshing page from time to time, my combined r9 390 and 5870 fluctuates from 1.7 GHs to 3GHs but sticks to more or less 2.5 GHs.

http://s11.postimg.org/6rpjbx2sj/5870a.jpg

I would run them separately and check your rates. I imagine most of that hash rate is coming from your r9 390 when you run them together.  The vector setting defaults to 2 instead of 1 messing with the numbers on my 5770. I added -v 1 to my bat to fix it. My 5770 pulls around 393Mh/s per cgminer, pool shows between 300 - 450 depending on luck. The 5800 series should be twice that if I remember correctly. 

Also look at your acceptance rate. On the left I assume is your 290 started at 9:34:07 with 1032 shares accepted.  On the right is your 5870 started at 9:34:09 with only 472 shares accepted.  If they were started that close together your acceptance rate should be within 10-20% I would think. That makes me think it is the vector switch.

My 5770 runs pretty good on a diff of 1 with a drop of the mem clock to 600, maxing out the gpu engine @ 960, and an intensity of 14.  It runs at 61c.  It's an old card that I'll run until it drops.

I couldn't run my r9 380 & my 5770 together effectively.  The high diff caused my 5770 to throw out "share above target" lowering my acceptance rate. You can only see it in verbose or debug since it isn't a reject or a hardware error.  Just thought I'd mention it in case the 5800 is doing the same thing. You might be able to squeeze more out of it.

[arielbit]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

Haha, this is probably gonna fuck up your day, but check the pool.

I already received a mail the pool is only displaying half the hashrate of the miner...

It's NOT the pool

pool is not accurate..

refreshing page from time to time, my combined r9 390 and 5870 fluctuates from 1.7 GHs to 3GHs but sticks to more or less 2.5 GHs.

I would run them separately and check your rates. I imagine most of that hash rate is coming from your r9 390 when you run them together.  The vector setting defaults to 2 instead of 1 messing with the numbers on my 5770. I added -v 1 to my bat to fix it. My 5770 pulls around 393Mh/s per cgminer, pool shows between 300 - 450 depending on luck. The 5800 series should be twice that if I remember correctly. 

Also look at your acceptance rate. On the left I assume is your 290 started at 9:34:07 with 1032 shares accepted.  On the right is your 5870 started at 9:34:09 with only 472 shares accepted.  If they were started that close together your acceptance rate should be within 10-20% I would think. That makes me think it is the vector switch.

My 5770 runs pretty good on a diff of 1 with a drop of the mem clock to 600, maxing out the gpu engine @ 960, and an intensity of 14.  It runs at 61c.  It's an old card that I'll run until it drops.

I couldn't run my r9 380 & my 5770 together effectively.  The high diff caused my 5770 to throw out "share above target" lowering my acceptance rate. You can only see it in verbose or debug since it isn't a reject or a hardware error.  Just thought I'd mention it in case the 5800 is doing the same thing. You might be able to squeeze more out of it.

added -v 1 to the .bat file it runs at 814Mhs now..thanks

aside from the shares accepted, 390 best share is at 11k and 5870 is 2k before I restarted the 5870 with the -v 1

[Voidcrafter]

what makes me confident is that the top 15 adresses have bought more coins during this price decline even if they would want to dump right now they would have to pump up the market first to get enough volume for sells i think we will slowly go up again from here and spike up when there is any good news like polo.

[FandangledGizmo]

The biggest mistake DECRED made was the high inflation. (You should have started the supply at 15 million & the same current inflation settings as BTC.) Everything else about it, made it a coin that was similar too but superior to BTC.

With 180% year 1 inflation, You need $1 million (2000 BTC) worth of new buying demand over the next 2 months to sustain a DECRED price of $2 per coin. I can't tell you how absurd that is, if this coin is worth more than $0.25 each in a years time that would be a huge achievement by the devs with these settings.  

[Velgelm]

anybody here getting 1.6GHS on a 5870? getting better hashes than 280x  

Haha, this is probably gonna fuck up your day, but check the pool.

I already received a mail the pool is only displaying half the hashrate of the miner...

It's NOT the pool

pool is not accurate..

refreshing page from time to time, my combined r9 390 and 5870 fluctuates from 1.7 GHs to 3GHs but sticks to more or less 2.5 GHs.

for 5870 try set -v 1
and look at result on cgminer window and pool. Best view - create separate worker for 5870 - ex. user.5870, run mining with -v 1 for 5870  and post screens dashboard pool due to few hours.... you look, that real hashrate 5870 between-800-850 Mh
P.S The full name of the key "--vectors <arg>", relevant only for older radeon cards 5* and 6* have this option puts cgminer defaults to 2 and hash rate is not displayed correctly

[Velgelm]

Just mathematics :
your hashrete R9 390 ~1640 your result R9 390+5870 ~ 2500 ... aaannnndddd
2500(total)-1640(R9 390) = 860 Mh\s for 5870....

Draw your own conclusions

[magalhanze]

what makes me confident is that the top 15 adresses have bought more coins during this price decline even if they would want to dump right now they would have to pump up the market first to get enough volume for sells i think we will slowly go up again from here and spike up when there is any good news like polo.

There is still much to happen in short term, so i agree on you.

Poloniex, Gui wallet and POS pool on mainnet may shake the markets in the next weeks