Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jkminkov]

m have this same problem and my pc shutdown
you pc are shutdown too ?

my psu

ROFL, that psu is rated as real 300W.

[Marvell1]

I got 5 more XFX 480 reference cards the ones with the back plate, something seems wrong with these ones do they have different straps ?
the normal low power mod that works for all my reference cards is making these ones cap the clock at 700 or so

in GPU-Z i see the correct clocks and mem to 2125 but the cards refuse to go over 700 or so core clock.

wth ?

**Update***
Tricky tricking XFX, these ones have different memory timings than the other REF cards WTF ?  only thing that saved me is I found this link after some googling

https://forum.ethereum.org/discussion/11054/xfx-rx-480-rx-480m8bfa6-modded-bios

huge for me since i had no rom backup of these 5 cards I got for 20% off.   So now we even have to check the ram modules on REF cards WTF XFX

btw way the name on the ROM is the same jeez

[GKar]

I could use some trouble shooting here.

my command line :   ethdcrminer64 -epool exp.suprnova.cc:3333 -ewal name.worker -epsw x -esm 3 -dpool dcr.suprnova.cc:2252 -dwal name.worker-1 -dpsw x -allpools 1 -allcoins 1

Miner cannot connect to the pools.

Using Windows 8.1   miner v7.4

what am I missing?

[big_daddy]

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100


i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X  R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

[djole]

Does anyone have nice stable ROM for 470 4GB Nitro OC Hynix or Elpida ? I have 3 of each, getting only 22 MH/s per card (total 133).

Thanks

[KarinaKasimanova]

Thank you for all your effort.

[almirfiorio]

Dear Friends

When im started claymores im receive the message

How im can solv this ?



Thanks
Almir

[vapourminer]

When im started claymores im receive the message

How im can solv this ?

https://s24.postimg.org/5c07mernp/Zgki_Hg_YL6_KNeqt87_NOn8j_Nl_H_Eb_Fbref_Ug6_Boc_CEG5_If_DUe.jpg

make sure your computer and cards are running stock (no overclock, no undervolt, no modded stuff). have current chipset drivers for motherboard. update OS. set 16 gigs virtual memory

what power supply do you have? what other specs? like video card driver version, ram, mobo etc

[matmator]

use 7.4 

[vapourminer]

use 7.4 

yeah that could help too

[almirfiorio]

Im not use overclock

And um running  version 7.4

And problem continue

[quotelink=topic=1433925.msg17211751#msg17211751 date=1481979000]
use 7.4  

yeah that could help too
[/quote]

[vapourminer]

Im not use overclock

And um running  version 7.4

And problem continue

pull one card.

any better?

[almirfiorio]

Im only have one

Im not use overclock

And um running  version 7.4

And problem continue

pull one card.

any better?

[vapourminer]

Im only have one

pic shows 4 gpus and ver 7.2

post complete rig specs

[matmator]

Im only have one

Im not use overclock

And um running  version 7.4

And problem continue

pull one card.

any better?

We see 4 cards on the screen,

what is gpu? Driver version?

[almirfiorio]

This picture is not my
But im have same error

Im only have one

Im not use overclock

And um running  version 7.4

And problem continue

pull one card.

any better?

We see 4 cards on the screen,

what is gpu? Driver version?

[Gambler8899]

Is there any faster miner than claymores for amd?
Which coin do you mine beside eth?

[vandres]

Is it there a way to use the remote monitor from a wan connection?

[batko]

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100


i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X  R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

I have same problem with 380 2GB model

[molitar]

I need help the miner keeps stalling at devfee and at start. I have to press enter to get it to continue.

Windows 10
Page file set to 32-48 MB on an SSD card

Start up
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner2 -esm 2 -epsw <password> -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=<address>&worker=miner2&email=<email@gmail.com>" -dcoin sia -allpools -1 -ethi 16 -r 0 -gser 1 -powlim -1


OpenCL initializing...

AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480
GPU #3: Ellesmere, 8192 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480
GPU #4: Ellesmere, 8192 MB available, 36 compute units
GPU #4 recognized as Radeon RX 480
GPU #5: Ellesmere, 8192 MB available, 36 compute units
GPU #5 recognized as Radeon RX 480
POOL/SOLO version

<stalls at this point>

If I press <Enter> here it will continue to mine until Devfee switch.