Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bluemustang]

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

Try the below link

https://www.reddit.com/r/EtherMining/comments/6hclmp/gtx970_mining_faq/

Should give you a better hashrate, i configured a couple of GTX 970/980 a few weeks back for one of my friends, and we managed to double the hashrate on stock, running around 13-14MH/s, so with modded BIOS it should get you closer to where you need to be.

Hope this helps

Thank you.

I don't have the Optimize for compute performance option in nvidia control panel. Googling seems to say its for maxwell and win10. This is a maxwell card but im on win7 :/

None of the other suggestions seemed to work. Except perhaps the command prompt one. Both of my cards are now hitting the overclock clocks rather than just the one card. Perhaps coincidence but might help others.

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

I have the same 7 Mh using Windows 8.1 and single GTX 970 card. I have noticed that it is associated with EPOCH #. When mining with low EPOCH # I have decent 23 Mh, but for actual mining EPOCH #155 or 160 is set and hash rate drops to 7-8 Mh. I try to figure if I can control what EPOCH # is used but do not sucseed up to now.

This seems to be the issue. I tried epoch 110 in the benchmark and got a little over 23MHs. I don't suppose epoch is something that can be changed in regular mining mode?

If not id love to hear of any others with 970s or maxwell cards that are getting normal hashrates.

PS: Using ethminer it says im getting 15mhs but i cant tell if thats for 1 card or both. In claymores it tells me the combined (which is around 15ish) but ethminer doesnt say.

[PB_SilentMiner]

Hi

Not sure if it is related, but happened on the same day  : I installed the new AMD Radeon Adrenalin 17.12.1 Driver (Windows), and now Claymore does not display the line with GPU Temperatures and Fan Percentages. Any ideas?

Thanks

Most probably.

Use AMD cleanup utility to remove newer driver and reinstall previous driver, disable updates.

Why fix it, if it ain't broke?

[PB_SilentMiner]

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

Try the below link

https://www.reddit.com/r/EtherMining/comments/6hclmp/gtx970_mining_faq/

Should give you a better hashrate, i configured a couple of GTX 970/980 a few weeks back for one of my friends, and we managed to double the hashrate on stock, running around 13-14MH/s, so with modded BIOS it should get you closer to where you need to be.

Hope this helps

Thank you.

I don't have the Optimize for compute performance option in nvidia control panel. Googling seems to say its for maxwell and win10. This is a maxwell card but im on win7 :/

None of the other suggestions seemed to work. Except perhaps the command prompt one. Both of my cards are now hitting the overclock clocks rather than just the one card. Perhaps coincidence but might help others.

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

I have the same 7 Mh using Windows 8.1 and single GTX 970 card. I have noticed that it is associated with EPOCH #. When mining with low EPOCH # I have decent 23 Mh, but for actual mining EPOCH #155 or 160 is set and hash rate drops to 7-8 Mh. I try to figure if I can control what EPOCH # is used but do not sucseed up to now.

This seems to be the issue. I tried epoch 110 in the benchmark and got 20-22MHs. I don't suppose epoch is something that can be changed in regular mining mode?

If not id love to hear of any others with 970s or maxwell cards that are getting normal hashrates.

PS: Using ethminer it says im getting 15mhs but i cant tell if thats for 1 card or both. In claymores it tells me the combined (which is around 15ish) but ethminer doesnt say.

Why not upgrade to Win 10. Last day to do so tomorrow 31/12/17!

https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(61286e18e3eb0e606b7697ba8526b6b8)(266696)(1544997)(06-3659821-11-0000000)()

[Bluemustang]

Never going to happen lol. Microsoft can shove it (for as long as i can avoid upgrading out of necessity). I now hate microsoft the way i hate apple.

Thanks though

[cantr]

''DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining.''

what is wrong?

[CryptonikaTrade]

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal x -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal x -dpsw x -ftime 10

eth 135Mh/s

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal x -epsw x -dpool dcr.suprnova.cc:3252 -dwal x -dpsw x -allpools 1 -estale 0

eth 127Mh/s

why is that?

Obviously the second coin DCR takes videocards resource and the main coin productivity get less

[jimmykl]

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

Windows 10 + latest update + drivers is what you need. 900 series cards won't go much beyond 7MH/s in Win 7 no matter what you try.

[rmoore95]

Finally got my Claymore's Miner to launch and run properly but it looks like now i have an issue with my graphics card.  Are my GPUs not powerful enough to mine?  I have a NVidia GeForce 940M and an Intel HD Graphics 520.  It looks like the Miner is only recognizing the NVidia. Here is an example of one of the logs below.  Any suggestions would be appreciated.

00:26:17:485   8e8   Check and remove old log files...
00:26:17:492   8e8   args: -epool us1.ethermine.org:14444 -ewal  ThinkPad -epsw x
00:26:17:497   8e8   
00:26:17:507   8e8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
00:26:17:515   8e8   º     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2      º
00:26:17:525   8e8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
00:26:17:531   8e8   
00:26:17:753   8e8   ETH: 1 pool is specified
00:26:17:769   8e8   Main Ethereum pool is us1.ethermine.org:14444
00:26:17:781   8e8   DCR: 0 pool is specified
00:26:18:038   8e8   OpenCL platform: Intel(R) OpenCL
00:26:18:054   8e8   OpenCL platform: NVIDIA CUDA
00:26:18:054   8e8   OpenCL platform: Intel(R) OpenCL
00:26:18:054   8e8   AMD OpenCL platform not found
00:26:20:552   8e8   CUDA initializing...

00:26:20:560   8e8   NVIDIA Cards available: 1
00:26:20:578   8e8   CUDA Driver Version/Runtime Version: 8.0/8.0
00:26:20:595   8e8   GPU #0: GeForce 940M, 2048 MB available, 3 compute units, capability: 5.0

00:26:20:608   8e8   Total cards: 1
00:26:23:037   8e8   No AMD cards in the list, ADL library will not be used.
00:26:23:256   8e8   NVML version: 8.382.05
00:26:23:407   3c60   ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 14444
00:26:23:515   8e8   No pool specified for Decred! Ethereum-only mining mode is enabled

00:26:23:531   8e8   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

00:26:23:548   8e8   ETH: eth-proxy stratum mode
00:26:23:563   8e8   Watchdog enabled
00:26:23:563   8e8   Remote management (READ-ONLY MODE) is enabled on port 3333
00:26:23:579   8e8   

00:26:23:737   3c60   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["", "x"], "id": 2, "method": "eth_submitLogin"}

00:26:23:752   3c60   ETH: Stratum - Connected (us1.ethermine.org:14444)
00:26:23:794   2150   NVML: cannot get fan speed, error 3
00:26:24:699   3c60   got 39 bytes
00:26:24:717   3c60   buf: {"id":2,"jsonrpc":"2.0","result":true}

00:26:24:732   3c60   parse packet: 38
00:26:24:734   3c60   ETH: Authorized
00:26:24:744   3c60   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:26:24:745   3c60   new buf size: 0
00:26:25:097   3c60   got 248 bytes
00:26:25:115   3c60   buf: {"id":3,"jsonrpc":"2.0","result":["0xf5ab9a8da288569cca411c70005e4c1f2d5877e205a6fd6a770dfcbf3e0d7da3","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4995e8"]}

00:26:25:134   3c60   parse packet: 247
00:26:25:144   3c60   ETH: job changed
00:26:25:151   3c60   new buf size: 0
00:26:25:239   103c   Setting DAG epoch #160...
00:26:26:805   2150   NVML: cannot get fan speed, error 3
00:26:27:967   103c   Setting DAG epoch #160 for GPU0
00:26:27:975   103c   Create GPU buffer for GPU0
00:26:27:982   103c   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

00:26:29:814   2150   NVML: cannot get fan speed, error 3
00:26:31:001   103c   Set global fail flag, failed GPU0
00:26:31:022   309c   Setting DAG epoch #160 for GPU0
00:26:31:040   103c   GPU 0 failed
00:26:31:049   309c   GPU 0, CUDA error 11 - cannot write buffer for DAG

00:26:32:842   2150   NVML: cannot get fan speed, error 3
00:26:34:059   309c   Set global fail flag, failed GPU0
00:26:34:076   309c   GPU 0 failed
00:26:35:169   3c60   ETH: checking pool connection...
00:26:35:179   3c60   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:26:35:694   3c60   got 248 bytes
00:26:35:694   3c60   buf: {"id":3,"jsonrpc":"2.0","result":["0xf5ab9a8da288569cca411c70005e4c1f2d5877e205a6fd6a770dfcbf3e0d7da3","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4995e8"]}

00:26:35:710   3c60   parse packet: 247
00:26:35:710   3c60   ETH: job is the same
00:26:35:726   3c60   new buf size: 0
00:26:35:861   2150   NVML: cannot get fan speed, error 3
00:26:38:875   2150   NVML: cannot get fan speed, error 3
00:26:41:905   2150   NVML: cannot get fan speed, error 3
00:26:45:132   2150   NVML: cannot get fan speed, error 3
00:26:45:183   3c60   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000005753e8ba"]}

00:26:45:200   3c60   ETH: checking pool connection...
00:26:45:203   3c60   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

00:26:45:595   3c60   got 39 bytes
00:26:45:595   3c60   buf: {"id":6,"jsonrpc":"2.0","result":true}

00:26:45:595   3c60   parse packet: 38
00:26:45:611   3c60   new buf size: 0
00:26:46:066   3c60   got 248 bytes
00:26:46:070   3c60   buf: {"id":3,"jsonrpc":"2.0","result":["0xf5ab9a8da288569cca411c70005e4c1f2d5877e205a6fd6a770dfcbf3e0d7da3","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4995e8"]}

00:26:46:078   3c60   parse packet: 247
00:26:46:082   3c60   ETH: job is the same
00:26:46:090   3c60   new buf size: 0
00:26:48:144   2150   NVML: cannot get fan speed, error 3
00:26:48:149   2150   NVML: cannot get fan speed, error 3
00:26:48:158   2150   GPU0 t=45C fan=0%
00:26:49:139   33a8   em hbt: 0, fm hbt: 0,
00:26:49:162   33a8   watchdog - thread 0 (gpu0), hb time 18094
00:26:49:173   33a8   watchdog - thread 1 (gpu0), hb time 18109
00:26:49:181   33a8   WATCHDOG: GPU error, you need to restart miner
00:26:49:189   33a8   NVML: cannot get fan speed, error 3
00:26:50:301   33a8   Restarting OK, exit...

[BSAlex]

Finally got my Claymore's Miner to launch and run properly but it looks like now i have an issue with my graphics card.  Are my GPUs not powerful enough to mine?  I have a NVidia GeForce 940M and an Intel HD Graphics 520.  It looks like the Miner is only recognizing the NVidia. Here is an example of one of the logs below.  Any suggestions would be appreciated.

00:26:31:001   103c   Set global fail flag, failed GPU0
00:26:31:022   309c   Setting DAG epoch #160 for GPU0
00:26:31:040   103c   GPU 0 failed
00:26:31:049   309c   GPU 0, CUDA error 11 - cannot write buffer for DAG

EPOCH #160 is using more then 2.5Gb video memory, you got only 2G. Try to mine other coin with smaller DAG, it is not possible to mine ETH with 2G video card and current difficulty level. Useful tool to select proper coin for your card https://investoon.com/tools/dag_size
Please note that you need slightly more memory than DAG size to actually get some hashing done.

[BSAlex]

Why not upgrade to Win 10. Last day to do so tomorrow 31/12/17!

https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(61286e18e3eb0e606b7697ba8526b6b8)(266696)(1544997)(06-3659821-11-0000000)()

Not all versions of windows are legible to upgrade. I am using Win 8.1/64 bit Enterprise and I'll upgrade ages before - but MS do not allow :-(

[PB_SilentMiner]

Why not upgrade to Win 10. Last day to do so tomorrow 31/12/17!

https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(61286e18e3eb0e606b7697ba8526b6b8)(266696)(1544997)(06-3659821-11-0000000)()

Not all versions of windows are legible to upgrade. I am using Win 8.1/64 bit Enterprise and I'll upgrade ages before - but MS do not allow :-(

Any version of Windows Vista 2 (sorry Windows 8 ) was abysmal, how you stuck with it for so long, we'll never know.

Do a fresh install of Win 10 Pro, no need to activate, if you only using it for mining. I've been running it for almost a year on a couple of rigs. Only gives you access to the extras and personalisation features, which are not needed for mining.

[PB_SilentMiner]

Hey guys. Wondering if anyone could give me a hand on some issues I'm having.

-I'm on Win7 and I have 2 GTX 970s and I'm getting incredibly low hashrate of about 7MHs per GPU.
-I've tried like 5 different drivers including the 347.52 ones as well the most recent ones.
-I've tried both ethminer and claymore's dual miner on both nanopool and etherminer using both CUDA and OpenCL.
-Disabled SLI (completely froze windows until a disabled that).
-Finally I found out that there's a benchmark mode which I tried and low and behold I got 18-19mhs (which honestly is still quite low for a 1590mhz overclock, at that range i've seen people get 23MHs). But while mining it doesnt break 7mhs.
-Another oddity is only 1 of the cards overclock. Without an OC I'm at 1506mhz (base is 1506 as i flashed a modified bios a few years back to get more voltage) on the cards and with OC im at 1590. Either way only 1 card overcloks and the other stays at 1177mhz.
-Oh and I'm watercooled so temps dont leave the mid 30s celcius.

I've done everything I could find (which there isn't a whole lot of info, especially for my cards). I have had no issues in gaming or anything else. Overclock and everything else is rock solid stable.

Really appreciate any insight anyone can give.

Thank you.

Windows 10 + latest update + drivers is what you need. 900 series cards won't go much beyond 7MH/s in Win 7 no matter what you try.

Haha, beat me to it, exactly what I was going to say.

For older hardware, best mining something else other than ETH, i've moved a few of my older cards over to Electroneum (ETN) getting at least 5-600 H/s on a non-modified GTX 970

[Rickirs]

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal x -epsw x -dcoin sia -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal x -dpsw x -ftime 10

eth 135Mh/s

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal x -epsw x -dpool dcr.suprnova.cc:3252 -dwal x -dpsw x -allpools 1 -estale 0

eth 127Mh/s

why is that?

Obviously the second coin DCR takes videocards resource and the main coin productivity get less

Yes, DCR is more resource hungry, you  can adjust -dcri 20 or less to see if you get back ETH hash however, will loose someone DCR

[rmoore95]

Trying to mine some UBIQ using Claymore's and keep getting this error message.  Anyone smarter than me (won't take much) know how to fix this?

ETH: Stratum - Connected (us.ubiqpool.io:8008)
ETH: Authorization failed
: {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}}
Stratum - reading socket failed 10038, disconnect
ETH: Job timeout, disconnect, retry in 20 sec...

[Metroid]

@claymore, please do have a look at my request about turning off dual mining completely when a set temperature is reached. The problem right now is that if I set -ttdcr 75, dual mine will only stop when the temperature reaches 80 degrees.

[leonix007]

Trying to mine some UBIQ using Claymore's and keep getting this error message.  Anyone smarter than me (won't take much) know how to fix this?

ETH: Stratum - Connected (us.ubiqpool.io:8008)
ETH: Authorization failed
: {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}}
Stratum - reading socket failed 10038, disconnect
ETH: Job timeout, disconnect, retry in 20 sec...

Can you post your config file or bat file?

it should be at least with this one

EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal YOURWALLETADD -epsw x -eworker rig1

[MikeGR7]

Finally got my Claymore's Miner to launch and run properly but it looks like now i have an issue with my graphics card.  Are my GPUs not powerful enough to mine?  I have a NVidia GeForce 940M and an Intel HD Graphics 520.  It looks like the Miner is only recognizing the NVidia. Here is an example of one of the logs below.  Any suggestions would be appreciated.

Please read the OP next time.

It is clearly stated that Intel HD Graphics is NOT supported by this miner.

[rmoore95]

Trying to mine some UBIQ using Claymore's and keep getting this error message.  Anyone smarter than me (won't take much) know how to fix this?

ETH: Stratum - Connected (us.ubiqpool.io:8008)
ETH: Authorization failed
: {"id":2,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Invalidlogin"}}
Stratum - reading socket failed 10038, disconnect
ETH: Job timeout, disconnect, retry in 20 sec...

Can you post your config file or bat file?

it should be at least with this one

EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal YOURWALLETADD -epsw x -eworker rig1

Here is my bat file...

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
start EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal MYWALLETADDRESS -epsw x -eworker rig1

[TheFunkyGibbon]

Here is my bat file...

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
start EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal MYWALLETADDRESS -epsw x -eworker rig1

Is that literally your batch file? because the MYWALLETADDRESS value should be replaced by your Ubiq address. (Hopefully I'm not stating the obvious but just in case)

[rmoore95]

Here is my bat file...

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
start EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal MYWALLETADDRESS -epsw x -eworker rig1

Is that literally your batch file? because the MYWALLETADDRESS value should be replaced by your Ubiq address. (Hopefully I'm not stating the obvious but just in case)

Haha!  No, I replaced my actual wallet address with MYWALLETADDRESS.  Is there anything wrong with the bat file?  Not sure why I am getting the error message...