Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Scorpion21]

How i can permanently turn off a GPU?
A GTX 530 with 2048 MB available can be used for mine something?

[DarkSouls6789]

Hi, I use 8x 470 Sapphire Mining Special Version, sometimes it says wattman experienced crashes on startup. also just after showin 8 cards in mine app and stating SOLO ... it just stays there and doesnt go further to mining section, i do restart and it fixes, but this time it doesnt. im trying to reinstal blockchain amd drivers, is there any advice? Win 10 64 bit, claymore dual - 10.2
Afterburner settings - power limit 0
core clock - 1236
mem clock 1995
52 C temp under load and radiating well. 201 mh and effective 180 mh...

now it works fine each card gives 25 mh except GPU 2 which gives 22 mh! is it normal? i always have 25 but today...

[joojoohe]

Hi to all.

I'm new in mining.
I'm going in crazy with simplemining to setup the goup to mining Ubiq, Etn, and other crytonight.
PLease there is somebody can help me to setup the group?

I have 8 Red dragons 8gb Gpus...
I don't know what to choose beetween Calymore 10.2, 10, or other and which string to set on them.
I just read the gravitymaster guide but i don't understan so much.

Thanks so much in advance.

[dinkydow]

Yah in relation to that.

Are rx570s better than rx580s. as in easier to mod and get to 30mhs

[TheKaban]

Hi Guys!

Tell me please, what you need to install to run Claymore's v10.2 for Linux Ubuntu Server 16.04.03?
I have problems with work Claymore's, I see a mistake after a while: WATCHDOG: GPU * hangs in OpenCL call, exit

My steps are installing drivers for RX470 4G:
1. Updated kernel ubuntu to version 4.4.11
2. Install driver amdgpu-pro version 17.40
3. Install APP_SDK version 3.0.130.136
4. Install ADL_SDK version 10.2


What do I do?
after installing the amdgpu-pro, ADL, APP, path you need somewhere to draw?

Thank you!

[AlainC]

Hi Guys!
Tell me please, what you need to install to run Claymore's v10.2 for Linux Ubuntu Server 16.04.03?
I have problems with work Claymore's, I see a mistake after a while: WATCHDOG: GPU * hangs in OpenCL call, exit
My steps are installing drivers for RX470 4G:
1. Updated kernel ubuntu to version 4.4.11
2. Install driver amdgpu-pro version 17.40
3. Install APP_SDK version 3.0.130.136
4. Install ADL_SDK version 10.2
What do I do?
after installing the amdgpu-pro, ADL, APP, path you need somewhere to draw?
Thank you!

APP_SDK and ADL_SDK are not useful

the kernel 4.4.11 is different from mine (I have latest on 16.04 LTS, the 4.10....).
Note I got ther just by making apt-get dist-upgrade and update  (and all possible update/upgrade)

check that when installing amdgpu-pro the dpkg compile phase does not end with an error (check the logs they name... eg, amdgpupro refused to compile with the 4.11 linux headers provided by ROCm)
If desperate, try to install ROCm
https://github.com/RadeonOpenCompute/ROCm
and afterward install amdgpu-pro for the OpenCL implementation (claymore don't use ROCm opencl implementation)

don't forget the large page options in grup config file... as said in the documentation,

[hotx]

I have a 7 GPU rig made up of (5) GTX 1060's and (2) RX470's.  My RX470's are giving me very low hashrates.  They fluctuate between 12 mh/s and 18 mh/s.  Here is my configuration.  Any thoughts?

Did you define manually the Ethereum and Siacoin mining intensity?
GTX1060 can withstand -dcri (Siacoin) up to 40-50 without significant drop in hashrate, while RX470 start to hash ETH slower beginning with -dcri 20-25. Maybe your miner has set automatically a 40-45 intensity, that keeps down ETH hashrate on RX470.
I suggest you to run 2 Claymore instances: one for GTX1060, another for RX470 and adjust Siacoin intensity. Define -di (GPU index) for each instance.

Thanks, i'm now running at a consistent 19-21mh/z.  Now to mod the bios and see if it goes higher.

[whitrzac]

[2017-12-04 10:44:28] [INFO] [MiningSession] Current Global profit: 19.66298294 USD/Day
[2017-12-04 10:44:28] [INFO] [MiningSession] Current Global profit: IS PROFITABLE MinProfit mine always regardless of profit
[2017-12-04 10:44:28] [INFO] [MiningSession] PrevStateProfit 0.00172849232094111, CurrentProfit 0.00172849232094111
[2017-12-04 10:44:28] [INFO] [MiningSession] Will NOT switch profit diff is 0, current threshold 0.15
[2017-12-04 10:45:03] [INFO] [SOCKET] Sending data: {"method":"devices.status","devices":[[0,"Intel(R) Pentium(R) CPU G4400 @ 3.30GHz",2,37,0,0],[1,"Radeon RX 570 Series",7,100,63,2365],[2,"Radeon RX 570 Series",7,100,63,2365],[3,"AMD Radeon (TM) R9 380 Series",7,100,63,2365],[4,"Radeon RX 570 Series",7,100,63,2365],[5,"Radeon RX 580 Series",7,100,63,2365],[6,"Radeon RX 580 Series",7,100,63,2365],[7,"Radeon RX 570 Series",7,100,63,2365]]}
[2017-12-04 10:45:16] [INFO] [ClaymoreDual-MINER_ID(2)-DEVICE_IDs(0,1,2,3,4,5,6)] [pid(3780)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 160000 ms
[2017-12-04 10:45:16] [INFO] [ClaymoreDual-MINER_ID(2)-DEVICE_IDs(0,1,2,3,4,5,6)] [pid(3780)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] MAX cool time exceeded. RESTARTING
[2017-12-04 10:45:16] [INFO] [ClaymoreDual-MINER_ID(2)-DEVICE_IDs(0,1,2,3,4,5,6)] [pid(3780)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Restarting miner..
[2017-12-04 10:45:16] [INFO] [ClaymoreDual-MINER_ID(2)-DEVICE_IDs(0,1,2,3,4,5,6)] [pid(3780)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Shutting down miner

Can anyone clarify what's going on here? The miner is restarting itself every 1-2 hours with this error.

[joojoohe]

Hi to all.

I'm new in mining.
I'm going in crazy with simplemining to setup the goup to mining Ubiq, Etn, and other crytonight.
PLease there is somebody can help me to setup the group?

I have 8 Red dragons 8gb Gpus...
I don't know what to choose beetween Calymore 10.2, 10, or other and which string to set on them.
I just read the gravitymaster guide but i don't understan so much.

Thanks so much in advance.

There are nobody can help me?

[Vann]

This is a thread for the Claymore dual miner, not your rig setup and tech support.

1/. Open a browser
2/. Type "How to Mine XXX" and "How to setup SMOS"
3/. Go through the hundreds of videos and tutorials that have already gone over the basic questions you are asking.

[DarkSouls6789]

Can anybody explain what is Undervolting? my undervolting section in Aterburner is not availaible. i use 8x 470 1500W win 10 64

[joojoohe]

This is a thread for the Claymore dual miner, not your rig setup and tech support.

1/. Open a browser
2/. Type "How to Mine XXX" and "How to setup SMOS"
3/. Go through the hundreds of videos and tutorials that have already gone over the basic questions you are asking.

Thanks so much but i just seen some videos but nothing that explain ho mining cryptonight with claymore 10.2.

Can you show me something?

Regards

[whitrzac]

Can anybody explain what is Undervolting? my undervolting section in Aterburner is not availaible. i use 8x 470 1500W win 10 64

No, because it has nothing to do with claymore's miner.

[whitrzac]

This is a thread for the Claymore dual miner, not your rig setup and tech support.

1/. Open a browser
2/. Type "How to Mine XXX" and "How to setup SMOS"
3/. Go through the hundreds of videos and tutorials that have already gone over the basic questions you are asking.

Thanks so much but i just seen some videos but nothing that explain ho mining cryptonight with claymore 10.2.

Can you show me something?

Regards

Wrong thread

[BSAlex]

Is it possible to select DAG epoch # that will be selected for mining? When miner selects epoch #155 my GTX970 is running 9.5Mh ether and 95Mh Sia. When miner selects epoch #5 numbers are much better - 23Mh ether and 225 Mh Sia
What exactly is this epoch # ? I have found that in the recent miner version it can be up to epoch #299 but I can't understand how to get benefit from it.

[TheKaban]

Hi Guys!
Tell me please, what you need to install to run Claymore's v10.2 for Linux Ubuntu Server 16.04.03?
I have problems with work Claymore's, I see a mistake after a while: WATCHDOG: GPU * hangs in OpenCL call, exit
My steps are installing drivers for RX470 4G:
1. Updated kernel ubuntu to version 4.4.11
2. Install driver amdgpu-pro version 17.40
3. Install APP_SDK version 3.0.130.136
4. Install ADL_SDK version 10.2
What do I do?
after installing the amdgpu-pro, ADL, APP, path you need somewhere to draw?
Thank you!

APP_SDK and ADL_SDK are not useful

the kernel 4.4.11 is different from mine (I have latest on 16.04 LTS, the 4.10....).
Note I got ther just by making apt-get dist-upgrade and update  (and all possible update/upgrade)

check that when installing amdgpu-pro the dpkg compile phase does not end with an error (check the logs they name... eg, amdgpupro refused to compile with the 4.11 linux headers provided by ROCm)
If desperate, try to install ROCm
https://github.com/RadeonOpenCompute/ROCm
and afterward install amdgpu-pro for the OpenCL implementation (claymore don't use ROCm opencl implementation)

don't forget the large page options in grup config file... as said in the documentation,

It turns out that you need to install only amdgpupro and write GRUB_CMDLINE_LINUX_DEFAULT="amdgpu.vm_fragment_size=9" in GRUB?

ROCm is also not necessary!?

You have installed Ubuntu server or Desktop?

Thank you!

[joojoohe]

This is a thread for the Claymore dual miner, not your rig setup and tech support.

1/. Open a browser
2/. Type "How to Mine XXX" and "How to setup SMOS"
3/. Go through the hundreds of videos and tutorials that have already gone over the basic questions you are asking.

Thanks so much but i just seen some videos but nothing that explain ho mining cryptonight with claymore 10.2.

Can you show me something?

Regards

Wrong thread

Then can you indicate me the right 3th, please?

[Vann]

There is a search bar in the upper right hand corner of the forum. Use it, it's there for a reason.
The miners include a README file that includes setup instructions and configuration options. As the file name implies, read them carefully. This isn't rocket science, I'm sure you can do it!

[Call_Me_Bambi]

Hi to all.

I'm new in mining.
I'm going in crazy with simplemining to setup the goup to mining Ubiq, Etn, and other crytonight.
PLease there is somebody can help me to setup the group?

I have 8 Red dragons 8gb Gpus...
I don't know what to choose beetween Calymore 10.2, 10, or other and which string to set on them.
I just read the gravitymaster guide but i don't understan so much.

Thanks so much in advance.

This thread is for "Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.2 (Windows/Linux)" for the Claymore's Cryptonote miner head over here https://bitcointalk.org/index.php?topic=638915.5220 and ask your questions about Cryptonote mining there.

[hightechredneck123]

I'm new to mining, I have one rig running 6 rx580s. I noticed restarts caused by the devfee being unreachable. I added the nofee switch and mined for 24 hrs nonstop. I'm using simplemining and these are my current settings:

-wd 1 -r 1 -epool stratum+tcp://eth-us.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -mode 1

It's trying to go to us1.ethermine.org and can't get there.

https://image.ibb.co/buhLxm/miner_rebooting.png

Is there something I missed?

update:
I found a reference to us1.ethermine in epools.txt. It was commented out. I removed the # and added my rigname and now the devfee will seems to be mining from us1.ethermine.
But - I am still getting restarts caused by devfee. Now it won't mine us1.ethpool.org. I found this one in config.txt. I'm going to remove the # on it and see what happens. Am I the only one having this problem?

Update 2
Well, fooey. That didn't work. It just restarted after failing to connect to us1.ethermine.org. I'm at a loss here. The only thing I know to do is to use nofee. At least it'll run steady. I'd appreciate some help here, I don't want to steal the man's work but with so many restarts it's actually more shares mined with the slower speeds.

OK, I'm a hardheaded idiot. I slowed down the core clock and the memory clock - like several people tried to tell me to do. Now it works as designed. The restarts had NOTHING to do with the devfee or the mining software. Well, at least the next guy with the same problem I had can read this and try slowing down first - please learn from my mistakes.