Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[dwdhu]

hi,
please submit your updated hashrate results to
https://gpustats.com
thank you

[1715300005]

1715300005

[1715300005]

1715300005

[panamaatx]

Anyone having issues with Siacoin and Nanopool?
Hashrates are reporting, but no siacoin in the unconfirmed bucket for 8 hours.

Mike

[mrm87]

Hello everyone,
i have and XFX RX 580 GTS 4gb @default.
Untill a few days ago i had about 25.5MH/s hashrate....after a crash, i have just 18.5 MH/S hashrate.
Don't know why system freeze (i have other services on that server).
The PSU is a Seasonis S12-II, the system is UBUNTU 16.04 LTS.
I try upgrading to last mining driver (amdgpu-pro-17.40-483984) and also to ClayMore 10.4 version...

How i can check my frequency under linux?
Thanks in advance

[Vann]

Hi Claymore,

I've received a few reports from users running Awesome Miner to monitor Claymore Ethereum miner about issues with larger number of GPU's. In some systems when you have a large number of GPU's, you get a timeout on the Claymore monitoring API - it simply doesn't respond within a reasonable time. If the user is starting the mining process with a few GPU's less, then it works fine again. So when you go above a certain number of GPUs, the monitoring API isn't working even if the mining itself is running fine.

Is this a know issue? Are there any workarounds?

Thanks!

Please send me some logs so I can check the reason.

I have the same problem with eth manager too, all rigs up to 6 cards work perfect, all ( 6 rigs ) with 12 cards timeout constantly and reconnect after 10sec to 10 min for couple of secconds before it timeouts again

Exact same problem with v10.4. On a 6 card rig EthMan reporting works fine. On my ASRock H110 Pro BTC+ 13 card build EthMan drops the connection and reconnects frequently. I am running the Adrenaline v17.12.2 drivers on both rigs and it makes no difference if EthMan is running on the 6 card or 13 card rig.

[quanghuy226]

I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!

https://i.imgur.com/qBHeJXc.png

19:06:05:050   1b84   new buf size: 0
19:06:07:752   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:07:843   1af4   GPU 2: got incorrect temperature 511, ignore
19:06:11:470   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:11:562   1af4   GPU 2: got incorrect temperature 511, ignore
19:06:14:926   1b84   got 248 bytes
19:06:14:926   1b84   buf: {"id":0,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]}

19:06:14:926   1b84   parse packet: 247
19:06:14:926   1b84   ETH: job changed
19:06:14:926   1b84   new buf size: 0
19:06:14:926   1b84   ETH: 01/14/18-19:06:14 - New job from asia1.ethermine.org:4444
19:06:14:926   1b84   target: 0x0000000112e0be82 (diff: 4000MH), epoch 163(2.27GB)
19:06:14:926   1b84   ETH - Total Speed: 127.854 Mh/s, Total Shares: 3019, Rejected: 0, Time: 17:52
19:06:14:926   1b84   ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 31.959 Mh/s, GPU4 31.968 Mh/s, GPU5 31.962 Mh/s, GPU6 31.964 Mh/s
19:06:15:019   1b84   ETH: checking pool connection...
19:06:15:019   1b84   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:06:15:066   1b84   got 248 bytes
19:06:15:066   1b84   buf: {"id":3,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]}

19:06:15:066   1b84   parse packet: 247
19:06:15:066   1b84   ETH: job is the same
19:06:15:066   1b84   new buf size: 0
19:06:15:194   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:15:290   1af4   GPU 2: got incorrect temperature 511, ignore

[RuMiner]

I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!

19:06:14:926   1b84   ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s

I guess two cards hang up, the problem is not with temperature

[bithead007]

I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!

19:06:14:926   1b84   ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s

I guess two cards hang up, the problem is not with temperature

I upgraded from v10.3 to v10.4 on Windows 10 today hoping the temperature control thread hang would be gone, but it still happens to me.

CJ

[Alexlikh]

Hi guys!

I got two Gigabyte RX580 8GB (Samsung).
When i start Miner. He crushed at this steps.

23:11:51:312   14c8   OpenCL platform: AMD Accelerated Parallel Processing
23:11:51:328   14c8   OpenCL initializing...

23:11:51:343   14c8   AMD Cards available: 2
23:11:51:343   14c8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
23:11:51:359   14c8   GPU #0 recognized as Radeon RX 480/580
23:11:51:375   14c8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
23:11:51:390   14c8   GPU #1 recognized as Radeon RX 480/580
23:11:51:406   14c8   POOL/SOLO version
23:11:51:453   14c8   b415
23:11:51:468   14c8   Platform: Windows
23:11:51:734   14c8   start building OpenCL program for GPU 0...
23:11:54:484   14c8   done
23:11:54:719   14c8   start building OpenCL program for GPU 1...
23:12:21:753   1238   


Any thoughts about this?

[lostprophet007]

Hello,
i Have 2 RX580 Samsung memory (modded for mining)

I am using Claymore for ETH and Decred, so dual ming with GPU0 and GPU1.
This is the code I use

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:
cd C:\miner
C:\miner\ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal xxx -epsw x -dpool dcr.suprnova.cc:3252 -dwal xxx -dpsw x -dcri 20 -tt 70 -tstop 85 -fanmin 50 -fanmax 100 -mvddc 850,850 -cvddc 850,850 -mclock 2150 -cclock 1130

All the value set by the command line are accepted by the GPU0, minimum fan voltage etc etc. Temp OK, Fan Ok

https://image.ibb.co/iiyO6m/index2.jpg
The problem is on the second GPU (#1). It seems that value are not accepted and I'm not able to undervoltage it.

https://image.ibb.co/cwWMsR/index.jpg
The voltage remains to 1,15V, no minimum fan and temp get worst as soon as I start the miner script.
What could be the problem? I have also tried both to double all the value (mvdcc cvddc etc etc) bot the let them single, but with no luck, Same voltage on the GPU1.

The strange thing is that If i use both GPU in single mode (so i disconnet one GPU at a time), all the value are perfectly set. If I try to use at the same time, the second GPU1 doesnt get the valure imposed on command line.
I've also tried to use previous version of claymore but the error remains.
Thanks for your time to read this.

[SixNix]

I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!

19:06:14:926   1b84   ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s

I guess two cards hang up, the problem is not with temperature

I upgraded from v10.3 to v10.4 on Windows 10 today hoping the temperature control thread hang would be gone, but it still happens to me.

CJ

Downgrade to V 10.1, Temperature Control works good. Resolved the problem for me.

[JKDK]

Will there be added so that this miner can rapport power use in the console?

[alucard20724]

v10.4:

- fixed issue with rejected shares in ETH+SIA mode for Vega cards.
- improved watchdog for temperature/fan management thread.

Thanks for the SIA update for Vega cards... I'm running it now and it's working

[nedis]

I use Claymore to mine Music coin. My cards are 2GB only, so miner fails when DevFree starts, sometimes hanging the whole system. Is there a way for me to make it work, except for disabling DevFee and reducing my speed?

[Vann]

You could try putting -allcoins exp and -allpools 1 in the command line or config file to see if it will mine Expanse for the devfee instead.

[da_vincicode]

Anyone having issues with Siacoin and Nanopool?
Hashrates are reporting, but no siacoin in the unconfirmed bucket for 8 hours.

Mike

Yes, Mike I have the same observation! I suspect, a boat load of Vega cards started mining Siacoin today after the fix in v10.4 and nanopool is unable to keep up! Check your nanopool shares tab, it should reflect the shares every hour.

-Sumanta

[Golempl]

I have dual mining dev fee question.

How it's calculated 2% ?
split 1% on main and 1% on other coin ?
it's 2% on main coin ?
2% on main and 2% on other ?

[Vann]

The devfee is only mined on the main coin.

[muzuca]

I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!



19:06:05:050   1b84   new buf size: 0
19:06:07:752   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:07:843   1af4   GPU 2: got incorrect temperature 511, ignore
19:06:11:470   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:11:562   1af4   GPU 2: got incorrect temperature 511, ignore
19:06:14:926   1b84   got 248 bytes
19:06:14:926   1b84   buf: {"id":0,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]}

19:06:14:926   1b84   parse packet: 247
19:06:14:926   1b84   ETH: job changed
19:06:14:926   1b84   new buf size: 0
19:06:14:926   1b84   ETH: 01/14/18-19:06:14 - New job from asia1.ethermine.org:4444
19:06:14:926   1b84   target: 0x0000000112e0be82 (diff: 4000MH), epoch 163(2.27GB)
19:06:14:926   1b84   ETH - Total Speed: 127.854 Mh/s, Total Shares: 3019, Rejected: 0, Time: 17:52
19:06:14:926   1b84   ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 31.959 Mh/s, GPU4 31.968 Mh/s, GPU5 31.962 Mh/s, GPU6 31.964 Mh/s
19:06:15:019   1b84   ETH: checking pool connection...
19:06:15:019   1b84   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:06:15:066   1b84   got 248 bytes
19:06:15:066   1b84   buf: {"id":3,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]}

19:06:15:066   1b84   parse packet: 247
19:06:15:066   1b84   ETH: job is the same
19:06:15:066   1b84   new buf size: 0
19:06:15:194   1af4   GPU 1: got incorrect temperature 511, ignore
19:06:15:290   1af4   GPU 2: got incorrect temperature 511, ignore

I got this error once, and to fix I changed the riser and the PSU energy cable of the riser.

It's was the only way to solve the problem... if you don't have an extra riser, try just change the psu energy cable of the riser.

[muzuca]

Hello,
i Have 2 RX580 Samsung memory (modded for mining)

I am using Claymore for ETH and Decred, so dual ming with GPU0 and GPU1.
This is the code I use

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:
cd C:\miner
C:\miner\ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal xxx -epsw x -dpool dcr.suprnova.cc:3252 -dwal xxx -dpsw x -dcri 20 -tt 70 -tstop 85 -fanmin 50 -fanmax 100 -mvddc 850,850 -cvddc 850,850 -mclock 2150 -cclock 1130

All the value set by the command line are accepted by the GPU0, minimum fan voltage etc etc. Temp OK, Fan Ok


The problem is on the second GPU (#1). It seems that value are not accepted and I'm not able to undervoltage it.


The voltage remains to 1,15V, no minimum fan and temp get worst as soon as I start the miner script.
What could be the problem? I have also tried both to double all the value (mvdcc cvddc etc etc) bot the let them single, but with no luck, Same voltage on the GPU1.

The strange thing is that If i use both GPU in single mode (so i disconnet one GPU at a time), all the value are perfectly set. If I try to use at the same time, the second GPU1 doesnt get the valure imposed on command line.
I've also tried to use previous version of claymore but the error remains.
Thanks for your time to read this.

Try something like this:

ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal xxx -epsw x -dpool dcr.suprnova.cc:3252 -dwal xxx -dpsw x -dcri 20 -tt 70 -tstop 85 -fanmin 50 -fanmax 100 -cclock 1130,1130 -mclock 2150,2150 -cvddc 850,900 -mvddc 850,900

Change the voltage for the second GPU, in my case I have the same brand, memory and bios modded... but I cant put the same configs, GPU doesn't accept.

Another thing that works for me... lunch the mine sfw and after start mine, close and open claymore... 3 times... in some cases when the config didn't get, I do that and works.

[MRCollyns]

Here's a new one-

Last week i left to go on a cruise and my hashrate was 168MH/s Mining ETH on Nanopool. I have a rig of 5 RX580 8GB and 1 RX570 4GB all of them were pushing 25MH/s to 28MH/s consistently. Some time while i was gone the power went out and the system rebooted itself and now I can only get 122MH/s out of the entire rig.

I went through and did a fresh install of Ubuntu with the AMDGPU Blockchain drivers (installed with --compute to only give me the computational aspects of the driver) and set my Large Page Support to "9" in /ect/defaults/grep, only this time the large page support does nothing. Where as last time it brought my hashing from 122MH/s up to the 168 MH/s i came to know a love oh so well.... Anyone have any idea what could have happened to slow the hashrate down so much?

Ubuntu 16.04.3
Claymore 10.4

I did see something about increased difficulty, but 40MH/s drop??? That seems a bit excessive. I hope one of you can shed some insight onto what may have happened.

-C