Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[neweggslave23]

anyone have temp and fan working in claymore 10.3?

i'm on AMD v 17.12.2, it's currently not showing anything.

question can u control the OC with those drivers?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

yes, i ditched afterburner, since it won't unlock voltage control. I use their wattman interface to undervolt and overclock.

[1714986463]

1714986463

[1714986463]

1714986463

[1714986463]

1714986463

[cryptoillusion1]

V10.3 just awesome   , Hash rate increase by 5-7 %  

Cards? what are u updating from?

i noticed no difference, 5% is a ton.

I noticed no difference ...using the blockchain driver

also it states "now miner shows PCI bus number for every GPU" - cannot see this - How to get it

[noviceminer]

https://i.imgur.com/IHGiV0v.png

Has anyone experienced this ? "Nvidia 1070 Ti cant be removed or unplugged". Tried using 388.10 to 388.71 and nothing worked. Cards set to stock settings, changed drivers, risers, PCI-e ports, PSU is at 80% use so no overload there.

What could cause such an issue ?

Any help is appreciated.

[crypper]

Has anyone experienced this ? "Nvidia 1070 Ti cant be removed or unplugged". Tried using 388.10 to 388.71 and nothing worked. Cards set to stock settings, changed drivers, risers, PCI-e ports, PSU is at 80% use so no overload there.

What could cause such an issue ?

Any help is appreciated.

How do you think this problem is related to claymore?

[noviceminer]

Happens while mining with claymore

[crypper]

Happens while mining with claymore

Have you tried different miners?

[noviceminer]

Yes all of them give same issue but I got it first while running Claymore

[crypper]

Yes all of them give same issue but I got it first while running Claymore

and therefore you believe claymore is the reason; I like the logic.
Well you problem is most likely driver related. Have you tried stress test the card/s? Try different drivers. Then contact nvidia and RMA the card if nothing helps.

[cirlama]

Hi all,
I am mining on V10.2 on 3 windows 10 PC (R9 380, RX-480 and RX-580) and in the same time I use the Intel I5 or I7 to mine XMR (monero or similar) and the CPU mining pays the electricity...
This morning, 2 out of my 3 PC did upgrade Windows 10 to the latest patch for spectre issue (I guess it is KB4056892), and my ETH/PASC combined mining went down to 0 on those 2 PCs.

Same behavior after PC restart, so I stopped XMR mining (XMRIG), and ETH/PASC combined mining went back to normal...

No more time to investigate (need to go to work).

Anyone else has that and has ideas to help ?

[dhmctrader]

This morning, 2 out of my 3 PC did upgrade Windows 10 to the latest patch for spectre issue (I guess it is KB4056892)

This update seems to have caused me a ton of trouble. PC was shutting down when running 10.2 or 10.3.

Backed it out and things seem to be OK again.

[Sine Nomine]

Is 11.2Mh/s normal for 280x for Ethereum mining?

Forget about mining Ethereum or basically any Ethash coin with a 280X.

Instead try Equihash coins such as Zclassic, Zcash, BitcoinGold and Zencash, just to name a few.

[SummersideGuy]

Has anyone experienced this ? "Nvidia 1070 Ti cant be removed or unplugged". Tried using 388.10 to 388.71 and nothing worked. Cards set to stock settings, changed drivers, risers, PCI-e ports, PSU is at 80% use so no overload there.

What could cause such an issue ?

Any help is appreciated.

I started experiencing this this morning with my 1060's never had it happen before and now all of a sudden it is doing exactly the same. I was using claymore 10.1. I dont know what the problem was but I removed Nvidia drivers and downloaded claymore 10.3. I have not had it happen since
Note I am on a Window 7 system was running older nvidia drivers as well

[rmh01]

Will there be a linux version also for 10.3?

[KleinerMiner]

V10.3 just awesome  , Hash rate increase by 5-7 % 

Oh really? Then please tell us how this works. It seems you´re the only one having luck.
I noticed zero difference in Performance on two rigs updated to 10.3 by today

Pci Bus is shown, it is running so far... but Performance wise 10.3 compared to 10.2 is not a single perctent faster.
Rig Config: 8x Sapphire Nitro+ RX580s 8GB @1175/2225, Win10, AMD Driver 17.7.2, Claymore 10.2 and now 10.3 with same Hash: 31.x/Card or 249,x Total per Rig

cheers

[noviceminer]

https://i.imgur.com/IHGiV0v.png

Has anyone experienced this ? "Nvidia 1070 Ti cant be removed or unplugged". Tried using 388.10 to 388.71 and nothing worked. Cards set to stock settings, changed drivers, risers, PCI-e ports, PSU is at 80% use so no overload there.

What could cause such an issue ?

Any help is appreciated.

I started experiencing this this morning with my 1060's never had it happen before and now all of a sudden it is doing exactly the same. I was using claymore 10.1. I dont know what the problem was but I removed Nvidia drivers and downloaded claymore 10.3. I have not had it happen since
Note I am on a Window 7 system was running older nvidia drivers as well

Thank you so much for your helpful post. At least you were not a smartass about it like the earlier guy. Some people post just to make their post count more. I love the ignore button

I too am on Window 7 64 bit. Could you please tell me your Nvidia drivers version ?

[thrash_er]

anyone have temp and fan working in claymore 10.3?

i'm on AMD v 17.12.2, it's currently not showing anything.

same issue. anyone can fix it?

[Claymore]

If fan/temperature control does not work for you, PM me what Windows version you use and send the complete miner log file for about two minutes of work.

[Bael]

Hi

Do you know if dual mining will continue to be profitable after the exit of these machines?

https://itopshop.net/collections/miners/products/group-buy_-baikal-giant-b-blake256r14-blake256r8-blake2b-lbry-pascal-160g-410w-for-blake256r14?variant=775474774035

I really have no idea how it would affect the dual mining

regards

[subutherobot]

AMD Radeon R7 360, windows 10

Mining for 10-15 minutes. Hash rate : 1.2 Mh/s for Musicoin and 18 Mh/s for Siacoin. No shares still. Mining on Miningpoolhub and nanopool.

Is there someone who could help?

[pubix]

Why there's no info on GPU temp and fan %?